GS
	FRAME GS_218h (0x0218)
		B: MMAX_EGS, OFFSET 2 LEN 1 - Motor torque request Max
		B: MMIN_EGS, OFFSET 1 LEN 1 - engine torque request min
		B: MTGL_EGS, OFFSET 0 LEN 1 - motor torque request. Toggle 40ms + -10
		I: M_EGS, OFFSET 3 LEN 13 - Required. Engine torque
		E: GIC, OFFSET 20 LEN 4 - actual gear
			RAW: 0 - actual gear "N" / N
			RAW: 1 - actual gear "1" / D1
			RAW: 2 - actual gear "2" / D2
			RAW: 3 - actual gear "3" / D3
			RAW: 4 - actual gear "4" / ​​D4
			RAW: 5 - actual gear "5" / D5
			RAW: 6 - actual gear "6" / D6
			RAW: 7 - actual gear "7" / D7
			RAW: 8 - actual gear "continuously forward / D_CVT
			RAW: 9 - actual gear "continuously backwards" / R_CVT
			RAW: 10 - actual gear "R3" / R3
			RAW: 11 - Actual gear "R" / R
			RAW: 12 - actual gear "R2" / R2
			RAW: 13 - actual gear "P" / P
			RAW: 14 - No Force / No Force
			RAW: 15 - signal not available / SNV
		E: GZC, OFFSET 16 LEN 4 - target gear
			RAW: 0 - target gear "N" / N
			RAW: 1 - target gear "1" / D1
			RAW: 2 - target gear "2" / D2
			RAW: 3 - target gear "3" / D3
			RAW: 4 - target gear "4" / ​​D4
			RAW: 5 - target gear "5" / D5
			RAW: 6 - target gear "6" / D6
			RAW: 7 - target gear "7" / D7
			RAW: 8 - target gear "stepless forward / D_CVT
			RAW: 9 - target gear "continuously backwards" / R_CVT
			RAW: 10 - target gear "R3" / R3
			RAW: 11 - Target gear "R" / R
			RAW: 12 - target gear "R2" / R2
			RAW: 13 - Target gear "P" / P
			RAW: 14 - circuit termination / CANCEL
			RAW: 15 - signal not available / SNV
		B: HSM, OFFSET 31 LEN 1 - manual switching mode
		B: SWITCH, OFFSET 30 LEN 1 switching
		B: FW_HOCH, OFFSET 29 LEN 1 - driving resistance high
		B: GSP_OK, OFFSET 28 LEN 1 - basic switching program o.k.
		B: G_G, OFFSET 27 LEN 1 - off-road gear
		B: K_G_B, OFFSET 26 LEN 1 - Order (converter bypass) clutch "closed"
		B: K_O_B, OFFSET 25 LEN 1 - Order (converter bypass) clutch "open"
		B: K_S_B, OFFSET 24 LEN 1 - Order (converter bypass) clutch "slip"
		E: FPC_AAD, OFFSET 38 LEN 2 - drive program for AAD
			RAW: 0 - Sport (default) / SPORT
			RAW: 1 - COMFORT / COMFORT
			RAW: 2 - not defined
			RAW: 3 - signal not available / SNV
		B: KD, OFFSET 37 LEN 1 - Kickdown
		B: UEHITZ_GET, OFFSET 36 LEN 1 - Overtemperature gearbox
		B: GS_NOTL, OFFSET 35 LEN 1 - GS in emergency mode
		B: ALF, OFFSET 34 LEN 1 - start release
		B: KS, OFFSET 33 LEN 1 - bang start
		B: GET_OK, OFFSET 32 LEN 1 - gear ok
		B: MOT_NAUS, OFFSET 47 LEN 1 - Motor emergency shutdown
		B: MOT_NAUS_CNF, OFFSET 46 LEN 1 - MOT_NAUS confirmbit
		B: K_LSTFR, OFFSET 45 LEN 1 - converter lockup clutch unloaded
		B: DYN0_AMR_EGS, OFFSET 42 LEN 1 - intervention mode / drive torque control
		B: DYN1_EGS, OFFSET 41 LEN 1 - intervention mode / drive torque control
		B: MPAR_EGS, OFFSET 40 LEN 1 - Motor torque request parity (even parity)
		I: MKRIECH, OFFSET 48 LEN 8 - creep torque (FFh with EGS, CVT) or CALID / CVN
		I: ERROR, OFFSET 59 LEN 5 - Error number or counter for CALID / CVN transmission
		B: CALID_CVN_AKT, OFFSET 58 LEN 1 - CALID / CVN transmission active
		E: FEHLPRF_ST, OFFSET 56 LEN 2 - Status error check
			RAW: 0 - error check not yet run through completely / WAIT
			RAW: 1 - error check run through completely, result i. O. / OK
			RAW: 2 - Error detected, enter current environment data / ERROR
			RAW: 3 - not defined
	FRAME GS_338h (0x0338)
		I: NAB, OFFSET 0 LEN 16 - gearbox output speed (only 463/461, otherwise FFFFh)
		I: NTURBINE, OFFSET 48 LEN 16 - turbine speed (EGS52-NAG, VGS-NAG2)
	FRAME GS_418h (0x0418)
		E: FSC, OFFSET 0 LEN 8 - speed step
			RAW: 32 - Blank ("") / BLANK
			RAW: 49 - speed step "1" / ONE
			RAW: 50 - speed step "2" / TWO
			RAW: 51 - speed step "3" / THREE
			RAW: 52 - speed step "4" / ​​FOUR
			RAW: 53 - speed step "5" / FUENF
			RAW: 54 - speed step "6" / SIX
			RAW: 55 - speed step "7" / SEVEN
			RAW: 65 - speed level "A" / A
			RAW: 68 - speed step "D" / D
			RAW: 70 - "F" / F error mark
			RAW: 78 - speed step "N" / N
			RAW: 80 - speed step "P" / P
			RAW: 82 - speed step "R" / R
			RAW: 255 - Passive value / SNV
		E: FPC, OFFSET 8 LEN 8 - driving program
			RAW: 2 - "C", message "gear, actuate parking brake!" with warning tone / C_MGFB_WT
			RAW: 3 - "C", message "Shift gear, shift lever to N!" / C_MGSNN
			RAW: 4 - "C", message "gear, apply brake!" / C_MGBB
			RAW: 6 - "C", message "Transmission, request gear again!" / C_MGGEA
			RAW: 7 - "C", message "Gear, insert N to start!" / C_MGZSN
			RAW: 10 - "A", message "Activate gear, parking brake!" with warning tone / A_MGFB_WT
			RAW: 11 - "A", message "Shift gear, shift lever to N!" / A_MGSNN
			RAW: 12 - "A", message "gear, apply brake!" / A_MGBB
			RAW: 14 - "A", message "Request transmission, gear again!" / A_MGGEA
			RAW: 15 - "A", message "Gear, insert N to start!" / A_MGZSN
			RAW: 18 - "S", message "Activate gear, parking brake!" with warning tone / S_MGFB_WT
			RAW: 19 - "S", message "Shift gear, shift lever to N!" / S_MGSNN
			RAW: 20 - "S", message "gear, apply brake!" / S_MGBB
			RAW: 22 - "S", message "Request gear, gear again!" / S_MGGEA
			RAW: 23 - "S", message "Gear, insert N to start!" / S_MGZSN
			RAW: 24 - shift recommendation "upshift" / UP
			RAW: 25 - Shift recommendation "Downshift" / DOWN
			RAW: 32 - "" (blank) / BLANK
			RAW: 64 - "" (blank), message "Gear, insert N!" / BLANK_MGN
			RAW: 65 - "A" / A
			RAW: 67 - "C" / C
			RAW: 70 - "F" / F error mark
			RAW: 77 - "M" / M
			RAW: 83 - "S" / S
			RAW: 87 - "W" / W
			RAW: 95 - "_" (Underscore) / _
			RAW: 96 - "" (blank), message "Gearbox, visit workshop!" / BLANK_MGW
			RAW: 97 - "A", message "Gear, insert N!" / A_MGN
			RAW: 99 - "C", message "Gear, insert N!" / C_MGN
			RAW: 109 - "M", message "Gear, insert N!" / M_MGN
			RAW: 115 - "S", message "Gear, insert N!" / S_MGN
			RAW: 119 - "W", message "Gear, insert N!" / W_MGN
			RAW: 127 - "_" (Underscore), message "Gear, insert N!" / __MGN
			RAW: 129 - "A", message "Gearbox, visit workshop!" / A_MGW
			RAW: 131 - "C", message "Gearbox, visit workshop!" / C_MGW
			RAW: 134 - Error marking "F", message "Gearbox, visit workshop!" / F_MGW
			RAW: 141 - "M", message "Gearbox, visit workshop!" / M_MGW
			RAW: 147 - "S", message "Gearbox, visit workshop!" / S_MGW
			RAW: 151 - "W", message "Gearbox, visit workshop!" / W_MGW
			RAW: 159 - "_" (Underscore), message "Gearbox, go to the workshop!" / __MGW
			RAW: 255 - Passive value / SNV
		I: T_GET, OFFSET 16 LEN 8 - transmission oil temperature
		B: KD, OFFSET 31 LEN 1 - Kickdown
		B: ESV_BRE, OFFSET 30 LEN 1 - apply brake when switching on
		E: MECH, OFFSET 28 LEN 2 - gear mechanism variant
			RAW: 0 - NAG, Large Gear / LARGE
			RAW: 1 - NAG, Small Gear / SMALL
			RAW: 2 - NAG2, Large Gear / GROSS2
			RAW: 3 - NAG2, Small Gear / KLEIN2
		B: CVT, OFFSET 27 LEN 1 - continuously variable transmission [1], multi-step transmission [0]
		B: SWITCH, OFFSET 26 LEN 1 switching
		B: FRONT, OFFSET 25 LEN 1 - front-wheel drive [1], rear-wheel drive [0]
		B: ALL-WHEEL, OFFSET 24 LEN 1 - all-wheel drive
		E: GIC, OFFSET 36 LEN 4 - actual gear
			RAW: 0 - actual gear "N" / N
			RAW: 1 - actual gear "1" / D1
			RAW: 2 - actual gear "2" / D2
			RAW: 3 - actual gear "3" / D3
			RAW: 4 - actual gear "4" / ​​D4
			RAW: 5 - actual gear "5" / D5
			RAW: 6 - actual gear "6" / D6
			RAW: 7 - actual gear "7" / D7
			RAW: 8 - actual gear "continuously forward / D_CVT
			RAW: 9 - actual gear "continuously backwards" / R_CVT
			RAW: 10 - actual gear "R3" / R3
			RAW: 11 - Actual gear "R" / R
			RAW: 12 - actual gear "R2" / R2
			RAW: 13 - actual gear "P" / P
			RAW: 14 - No Force / No Force
			RAW: 15 - signal not available / SNV
		E: GZC, OFFSET 32 LEN 4 - target gear
			RAW: 0 - target gear "N" / N
			RAW: 1 - target gear "1" / D1
			RAW: 2 - target gear "2" / D2
			RAW: 3 - target gear "3" / D3
			RAW: 4 - target gear "4" / ​​D4
			RAW: 5 - target gear "5" / D5
			RAW: 6 - target gear "6" / D6
			RAW: 7 - target gear "7" / D7
			RAW: 8 - target gear "stepless forward / D_CVT
			RAW: 9 - target gear "continuously backwards" / R_CVT
			RAW: 10 - target gear "R3" / R3
			RAW: 11 - Target gear "R" / R
			RAW: 12 - target gear "R2" / R2
			RAW: 13 - Target gear "P" / P
			RAW: 14 - circuit termination / CANCEL
			RAW: 15 - signal not available / SNV
		I: M_VERL, OFFSET 40 LEN 8 - torque loss (FFh at KSG)
		E: WHST, OFFSET 50 LEN 3 - Gear selector lever position (NAG, KSG, CVT)
			RAW: 0 - Gear selector lever in position "P" / P
			RAW: 1 - Gear selector lever in position "R" / R
			RAW: 2 - Gear selector lever in position "N" / N
			RAW: 4 - Gear selector lever in position "D" / D
			RAW: 7 - signal not available / SNV
		B: FMRADTGL, OFFSET 49 LEN 1 - Factor wheel torque toggle 40ms + -10
		B: FMRADPAR, OFFSET 48 LEN 1 - Wheel torque parity factor (even parity)
		I: FMRAD, OFFSET 53 LEN 11 - wheel torque factor (7FFh at KSG)
	FRAME D_RS_GS (0x07E9)
		I: D_RS, OFFSET 0 LEN 64 - KWP2000 diagnostic response
	FRAME SD_RS_GS (0x0723)
		I: SD_RS_GS, OFFSET 0 LEN 64 - System diagnosis response
	FRAME GS_APPL1 (0x051C)
		I: APPL1, OFFSET 0 LEN 64 - application
	FRAME GS_HSA (0x050A)
		I: HSA, OFFSET 0 LEN 64 - manual control on the test bench
	FRAME GS_HSB (0x050B)
		I: HSB, OFFSET 0 LEN 64 - manual control on the test bench
	FRAME GS_HSC (0x050C)
		I: HSC, OFFSET 0 LEN 64 - manual control on the test bench
	FRAME GS_HSD (0x050D)
		I: HSD, OFFSET 0 LEN 64 - manual control on the test bench
	FRAME GS_HSE (0x050E)
		I: HSE, OFFSET 0 LEN 64 - manual control on the test bench