Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time
executable file 275 lines (257 sloc) 8.81 KB
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Fredrik Holmqvist <thesuckiestemail@yahoo.se>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "primpl.h"
/*
** Create a new condition variable.
**
** "lock" is the lock used to protect the condition variable.
**
** Condition variables are synchronization objects that threads can use
** to wait for some condition to occur.
**
** This may fail if memory is tight or if some operating system resource
** is low. In such cases, a NULL will be returned.
*/
PR_IMPLEMENT(PRCondVar*)
PR_NewCondVar (PRLock *lock)
{
PRCondVar *cv = PR_NEW( PRCondVar );
PR_ASSERT( NULL != lock );
if( NULL != cv )
{
cv->lock = lock;
cv->sem = create_sem(0, "CVSem");
cv->handshakeSem = create_sem(0, "CVHandshake");
cv->signalSem = create_sem( 0, "CVSignal");
cv->signalBenCount = 0;
cv->ns = cv->nw = 0;
PR_ASSERT( cv->sem >= B_NO_ERROR );
PR_ASSERT( cv->handshakeSem >= B_NO_ERROR );
PR_ASSERT( cv->signalSem >= B_NO_ERROR );
}
return cv;
} /* PR_NewCondVar */
/*
** Destroy a condition variable. There must be no thread
** waiting on the condvar. The caller is responsible for guaranteeing
** that the condvar is no longer in use.
**
*/
PR_IMPLEMENT(void)
PR_DestroyCondVar (PRCondVar *cvar)
{
status_t result = delete_sem( cvar->sem );
PR_ASSERT( result == B_NO_ERROR );
result = delete_sem( cvar->handshakeSem );
PR_ASSERT( result == B_NO_ERROR );
result = delete_sem( cvar->signalSem );
PR_ASSERT( result == B_NO_ERROR );
PR_DELETE( cvar );
}
/*
** The thread that waits on a condition is blocked in a "waiting on
** condition" state until another thread notifies the condition or a
** caller specified amount of time expires. The lock associated with
** the condition variable will be released, which must have be held
** prior to the call to wait.
**
** Logically a notified thread is moved from the "waiting on condition"
** state and made "ready." When scheduled, it will attempt to reacquire
** the lock that it held when wait was called.
**
** The timeout has two well known values, PR_INTERVAL_NO_TIMEOUT and
** PR_INTERVAL_NO_WAIT. The former value requires that a condition be
** notified (or the thread interrupted) before it will resume from the
** wait. If the timeout has a value of PR_INTERVAL_NO_WAIT, the effect
** is to release the lock, possibly causing a rescheduling within the
** runtime, then immediately attempting to reacquire the lock and resume.
**
** Any other value for timeout will cause the thread to be rescheduled
** either due to explicit notification or an expired interval. The latter
** must be determined by treating time as one part of the monitored data
** being protected by the lock and tested explicitly for an expired
** interval.
**
** Returns PR_FAILURE if the caller has not locked the lock associated
** with the condition variable or the thread was interrupted (PR_Interrupt()).
** The particular reason can be extracted with PR_GetError().
*/
PR_IMPLEMENT(PRStatus)
PR_WaitCondVar (PRCondVar *cvar, PRIntervalTime timeout)
{
status_t err;
if( timeout == PR_INTERVAL_NO_WAIT )
{
PR_Unlock( cvar->lock );
PR_Lock( cvar->lock );
return PR_SUCCESS;
}
if( _MD_ATOMIC_INCREMENT( &cvar->signalBenCount ) > 1 )
{
if (acquire_sem(cvar->signalSem) == B_INTERRUPTED)
{
_MD_ATOMIC_DECREMENT( &cvar->signalBenCount );
return PR_FAILURE;
}
}
cvar->nw += 1;
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount ) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
PR_Unlock( cvar->lock );
if( timeout==PR_INTERVAL_NO_TIMEOUT )
{
err = acquire_sem(cvar->sem);
}
else
{
err = acquire_sem_etc(cvar->sem, 1, B_RELATIVE_TIMEOUT, PR_IntervalToMicroseconds(timeout) );
}
if( _MD_ATOMIC_INCREMENT( &cvar->signalBenCount ) > 1 )
{
while (acquire_sem(cvar->signalSem) == B_INTERRUPTED);
}
if (cvar->ns > 0)
{
release_sem_etc(cvar->handshakeSem, 1, B_DO_NOT_RESCHEDULE);
cvar->ns -= 1;
}
cvar->nw -= 1;
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount ) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
PR_Lock( cvar->lock );
if(err==B_NO_ERROR || (err == B_TIMED_OUT && timeout!=PR_INTERVAL_NO_TIMEOUT))
{
return PR_SUCCESS;
}
return PR_FAILURE;
}
/*
** Notify ONE thread that is currently waiting on 'cvar'. Which thread is
** dependent on the implementation of the runtime. Common sense would dictate
** that all threads waiting on a single condition have identical semantics,
** therefore which one gets notified is not significant.
**
** The calling thead must hold the lock that protects the condition, as
** well as the invariants that are tightly bound to the condition, when
** notify is called.
**
** Returns PR_FAILURE if the caller has not locked the lock associated
** with the condition variable.
*/
PR_IMPLEMENT(PRStatus)
PR_NotifyCondVar (PRCondVar *cvar)
{
status_t err ;
if( _MD_ATOMIC_INCREMENT( &cvar->signalBenCount) > 1 )
{
if (acquire_sem(cvar->signalSem) == B_INTERRUPTED)
{
_MD_ATOMIC_DECREMENT( &cvar->signalBenCount );
return PR_FAILURE;
}
}
if (cvar->nw > cvar->ns)
{
cvar->ns += 1;
release_sem_etc(cvar->sem, 1, B_DO_NOT_RESCHEDULE);
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
while (acquire_sem(cvar->handshakeSem) == B_INTERRUPTED)
{
err = B_INTERRUPTED;
}
}
else
{
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount ) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
}
return PR_SUCCESS;
}
/*
** Notify all of the threads waiting on the condition variable. The order
** that the threads are notified is indeterminant. The lock that protects
** the condition must be held.
**
** Returns PR_FAILURE if the caller has not locked the lock associated
** with the condition variable.
*/
PR_IMPLEMENT(PRStatus)
PR_NotifyAllCondVar (PRCondVar *cvar)
{
int32 handshakes;
status_t err = B_OK;
if( _MD_ATOMIC_INCREMENT( &cvar->signalBenCount) > 1 )
{
if (acquire_sem(cvar->signalSem) == B_INTERRUPTED)
{
_MD_ATOMIC_DECREMENT( &cvar->signalBenCount );
return PR_FAILURE;
}
}
if (cvar->nw > cvar->ns)
{
handshakes = cvar->nw - cvar->ns;
cvar->ns = cvar->nw;
release_sem_etc(cvar->sem, handshakes, B_DO_NOT_RESCHEDULE);
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount ) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
while (acquire_sem_etc(cvar->handshakeSem, handshakes, 0, 0) == B_INTERRUPTED)
{
err = B_INTERRUPTED;
}
}
else
{
if( _MD_ATOMIC_DECREMENT( &cvar->signalBenCount ) > 0 )
{
release_sem_etc(cvar->signalSem, 1, B_DO_NOT_RESCHEDULE);
}
}
return PR_SUCCESS;
}