Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Failed to load latest commit information.|
Synaptics touchpad driver for X.Org ----------------------------------- FAQ --- * Is this free software? Yes, the source code is released under the MIT license. * When will the driver be included in the XOrg distribution? It is already. * How do I use this driver with Linux kernel 2.6.x? You need to have the "evdev" driver loaded or compiled into the kernel (CONFIG_INPUT_EVDEV). Set the "Protocol" parameter in the X configuration file to "auto-dev". Also, if you set the "Device" parameter to "/dev/psaux", the same X configuration file should work for a 2.4.x kernel. When configuring the kernel, enable PS/2 mouse support (CONFIG_MOUSE_PS2). * It still doesn't work with a 2.6 kernel. Some distributions come with an incomplete /dev directory. The driver needs the /dev/input/eventX device nodes. Try to create them manually if they don't exist already. (Look at /proc/bus/input/devices to figure out how many nodes you need.) # mknod /dev/input/event0 c 13 64 # mknod /dev/input/event1 c 13 65 # mknod /dev/input/event2 c 13 66 ... * How can I configure tap-to-click behavior? If you set MaxTapTime=0 in the X config file then the touchpad will not use tapping at all, i.e. touching/tapping will not be taken as a mouse click. If, instead, you set MaxTapMove=0 in the X config file, then the touchpad will not use tapping for a single finger tap (left mouse button click) but will for the two and three finger tap (middle and right button click). * Why did tap-to-click stop working after I upgraded from an old version? Time is now measured in milliseconds instead of "number of packets". In practice, this means that if you are upgrading from an old version, you need to change MaxTapTime and EmulateMidButtonTime to make "tap to click" work. Good values are 180 and 75 respectively. * Gnome scrollbars scroll too much when using tap-to-click. Why? The ClickTime parameter is probably too big. Try setting it to 100. Gnome scrollbars use auto repeat, ie if you press the left mouse button and keep it pressed, the scroll bar will move until you release the button. This will lead to problems if the tap time is longer than the delay before auto repeat starts. * Vertical and horizontal scrolling events are mixed up. How come? Probably because some X startup/login script uses xmodmap to remap the mouse buttons. Correct settings for the touchpad are: xmodmap -e 'pointer = 1 2 3 4 5 6 7' You can check the current settings by running: xmodmap -pp * Horizontal scrolling doesn't work in some programs. Is it a driver bug? No, probably not. Support for horizontal scroll events must be handled by the application programs. Not all programs do that yet. Ask the authors of the application in question to implement support for horizontal scroll events. You can use the "xev" program to check if the synaptics driver generates the horizontal scroll events. If you are having problems with Mozilla, try this link: http://lists.debian.org/debian-laptop/2004/08/msg00167.html * Can the driver be used together with gpm? No, not reliably, if you are using a 2.4.x kernel. The gpm driver and the X driver both try to read data from the touchpad, and if they try to read at the same time, both drivers see incomplete data and don't know how to interpret it. If you are running a 2.6.x kernel though, there should be no conflict, because the kernel driver will make sure both user space drivers receive all events from the touchpad. * Can I use this driver with an ALPS Glidepoint device? Yes, see the README.alps file for more information. * The driver says "reset failed" and the touchpad doesn't work. What can I do? This problem has been reported for some Compaq models. It's currently not known why it happens, but removing the reset command from the driver appears to make it work. If you use a 2.4 linux kernel, replace the contents of the ps2_synaptics_reset() function in ps2comm.c with a "return TRUE;" statement. If you use a 2.6 linux kernel, remove the while loop in synaptics_query_hardware() in the file drivers/input/mouse/synaptics.c in the linux kernel source code. Authors ------- Many people have contributed to this driver. Look at the top of synaptics.c and ps2comm.c for details. The current maintainer is X.org development team <firstname.lastname@example.org>. Contacts -------- All questions regarding this software should be directed at the Xorg mailing list: http://lists.freedesktop.org/mailman/listinfo/xorg Please submit bug reports to the Xorg bugzilla: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg The master development code repository can be found at: git://anongit.freedesktop.org/git/xorg/driver/xf86-input-synaptics http://cgit.freedesktop.org/xorg/driver/xf86-input-synaptics For patch submission instructions, see: http://www.x.org/wiki/Development/Documentation/SubmittingPatches For more information on the git code manager, see: http://wiki.x.org/wiki/GitPage