Permalink
Browse files

Move some stuff around

Rename galaxysmtd.mk to device.mk that inherits device_base.mk from aries-common.
  • Loading branch information...
1 parent 1f8d705 commit 1935a5bd71c3b827bb855b573fc88b3818ed7198 @Kaik541 Kaik541 committed Nov 24, 2011
Showing with 67 additions and 189 deletions.
  1. +66 −0 device.mk
  2. +1 −1 full_galaxysmtd.mk
  3. +0 −188 galaxysmtd.mk
View
@@ -0,0 +1,66 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# This file is the device-specific product definition file for
+# crespo. It lists all the overlays, files, modules and properties
+# that are specific to this hardware: i.e. those are device-specific
+# drivers, configuration files, settings, etc...
+
+# Note that crespo is not a fully open device. Some of the drivers
+# aren't publicly available in all circumstances, which means that some
+# of the hardware capabilities aren't present in builds where those
+# drivers aren't available. Such cases are handled by having this file
+# separated into two halves: this half here contains the parts that
+# are available to everyone, while another half in the vendor/ hierarchy
+# augments that set with the parts that are only relevant when all the
+# associated drivers are available. Aspects that are irrelevant but
+# harmless in no-driver builds should be kept here for simplicity and
+# transparency. There are two variants of the half that deals with
+# the unavailable drivers: one is directly checked into the unreleased
+# vendor tree and is used by engineers who have access to it. The other
+# is generated by setup-makefile.sh in the same directory as this files,
+# and is used by people who have access to binary versions of the drivers
+# but not to the original vendor tree. Be sure to update both.
+
+# These are the hardware-specific configuration files
+PRODUCT_COPY_FILES := \
+ device/samsung/galaxysmtd/asound.conf:system/etc/asound.conf
+
+# Prebuilt kl keymaps
+PRODUCT_COPY_FILES += \
+ device/samsung/galaxysmtd/aries-keypad.kl:system/usr/keylayout/aries-keypad.kl
+
+# kernel modules
+PRODUCT_COPY_FILES += $(foreach module,\
+ $(wildcard device/samsung/galaxysmtd/*.ko),\
+ $(module):system/lib/modules/$(notdir $(module)))
+
+ifeq ($(TARGET_PREBUILT_KERNEL),)
+ LOCAL_KERNEL := device/samsung/galaxysmtd/kernel
+else
+ LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
+endif
+
+PRODUCT_COPY_FILES += \
+ $(LOCAL_KERNEL):kernel
+
+# Inherit Aries common device configuration.
+$(call inherit-product, device/samsung/aries-common/device_base.mk)
+
+# See comment at the top of this file. This is where the other
+# half of the device-specific product definition file takes care
+# of the aspects that require proprietary drivers that aren't
+# commonly available
+$(call inherit-product-if-exists, vendor/samsung/galaxysmtd/galaxysmtd-vendor.mk)
View
@@ -23,7 +23,7 @@
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
# This is where we'd set a backup provider if we had one
#$(call inherit-product, device/sample/products/backup_overlay.mk)
-$(call inherit-product, device/samsung/galaxysmtd/galaxysmtd.mk)
+$(call inherit-product, device/samsung/galaxysmtd/device.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/full.mk)
# Galaxy S uses high-density artwork where available
View
@@ -1,188 +0,0 @@
-# Copyright (C) 2010 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# This file is the device-specific product definition file for
-# crespo. It lists all the overlays, files, modules and properties
-# that are specific to this hardware: i.e. those are device-specific
-# drivers, configuration files, settings, etc...
-
-# Note that crespo is not a fully open device. Some of the drivers
-# aren't publicly available in all circumstances, which means that some
-# of the hardware capabilities aren't present in builds where those
-# drivers aren't available. Such cases are handled by having this file
-# separated into two halves: this half here contains the parts that
-# are available to everyone, while another half in the vendor/ hierarchy
-# augments that set with the parts that are only relevant when all the
-# associated drivers are available. Aspects that are irrelevant but
-# harmless in no-driver builds should be kept here for simplicity and
-# transparency. There are two variants of the half that deals with
-# the unavailable drivers: one is directly checked into the unreleased
-# vendor tree and is used by engineers who have access to it. The other
-# is generated by setup-makefile.sh in the same directory as this files,
-# and is used by people who have access to binary versions of the drivers
-# but not to the original vendor tree. Be sure to update both.
-
-
-# These is the hardware-specific overlay, which points to the location
-# of hardware-specific resource overrides, typically the frameworks and
-# application settings that are stored in resourced.
-DEVICE_PACKAGE_OVERLAYS := device/samsung/aries-common/overlay
-
-# These are the hardware-specific configuration files
-PRODUCT_COPY_FILES := \
- device/samsung/galaxysmtd/asound.conf:system/etc/asound.conf \
- device/samsung/aries-common/vold.fstab:system/etc/vold.fstab \
- device/samsung/aries-common/egl.cfg:system/lib/egl/egl.cfg \
- device/samsung/aries-common/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc
-
-# Init files
-PRODUCT_COPY_FILES += \
- device/samsung/aries-common/init.aries.rc:root/init.aries.rc \
- device/samsung/aries-common/init.aries.usb.rc:root/init.aries.usb.rc \
- device/samsung/aries-common/lpm.rc:root/lpm.rc \
- device/samsung/aries-common/ueventd.aries.rc:root/ueventd.aries.rc \
- device/samsung/aries-common/setupenv.sh:recovery/root/sbin/setupenv.sh
-
-
-# Prebuilt kl keymaps
-PRODUCT_COPY_FILES += \
- device/samsung/aries-common/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \
- device/samsung/aries-common/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
- device/samsung/galaxysmtd/aries-keypad.kl:system/usr/keylayout/aries-keypad.kl \
- device/samsung/aries-common/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl
-
-# Generated kcm keymaps
-PRODUCT_PACKAGES := \
- cypress-touchkey.kcm \
- s3c-keypad.kcm
-
-# Filesystem management tools
-PRODUCT_PACKAGES += \
- make_ext4fs \
- setup_fs
-
-# These are the OpenMAX IL configuration files
-PRODUCT_COPY_FILES += \
- device/samsung/aries-common/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \
- device/samsung/aries-common/media_profiles.xml:system/etc/media_profiles.xml
-
-# These are the OpenMAX IL modules
-PRODUCT_PACKAGES += \
- libSEC_OMX_Core.aries \
- libOMX.SEC.AVC.Decoder.aries \
- libOMX.SEC.M4V.Decoder.aries \
- libOMX.SEC.M4V.Encoder.aries \
- libOMX.SEC.AVC.Encoder.aries
-
-# Misc other modules
-PRODUCT_PACKAGES += \
- lights.aries \
- sensors.aries \
- audio.primary.aries \
- audio_policy.aries
-
-# Libs
-PRODUCT_PACKAGES += \
- libstagefrighthw
-
-
-# apns config file
-PRODUCT_COPY_FILES += \
- development/data/etc/apns-conf.xml:system/etc/apns-conf.xml
-
-# Bluetooth MAC Address
-PRODUCT_PACKAGES += \
- bdaddr_read
-
-# Device-specific packages
-PRODUCT_PACKAGES += \
- SamsungServiceMode \
- AriesParts
-
-# These are the hardware-specific features
-PRODUCT_COPY_FILES += \
- frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
- frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
- frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
- frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
- frameworks/base/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml \
- frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
- frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
- frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
- frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
- frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
- frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
- packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml
-
-# The OpenGL ES API level that is natively supported by this device.
-# This is a 16.16 fixed point number
-PRODUCT_PROPERTY_OVERRIDES := \
- ro.opengles.version=131072
-
-# These are the hardware-specific settings that are stored in system properties.
-# Note that the only such settings should be the ones that are too low-level to
-# be reachable from resources or other mechanisms.
-PRODUCT_PROPERTY_OVERRIDES += \
- wifi.interface=eth0 \
- wifi.supplicant_scan_interval=20 \
- ro.telephony.ril_class=samsung \
- ro.telephony.ril.v3=1 \
- mobiledata.interfaces=pdp0,eth0,gprs,ppp0 \
- dalvik.vm.heapsize=32m
-
-# enable Google-specific location features,
-# like NetworkLocationProvider and LocationCollector
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.com.google.locationfeatures=1 \
- ro.com.google.networklocation=1
-
-# Extended JNI checks
-# The extended JNI checks will cause the system to run more slowly, but they can spot a variety of nasty bugs
-# before they have a chance to cause problems.
-# Default=true for development builds, set by android buildsystem.
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.kernel.android.checkjni=0 \
- dalvik.vm.checkjni=false \
- persist.sys.vold.switchexternal=1
-
-# Set default USB interface
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
- persist.sys.usb.config=mtp
-
-# we have enough storage space to hold precise GC data
-PRODUCT_TAGS += dalvik.gc.type-precise
-
-# kernel modules
-PRODUCT_COPY_FILES += $(foreach module,\
- $(wildcard device/samsung/galaxysmtd/*.ko),\
- $(module):system/lib/modules/$(notdir $(module)))
-
-ifeq ($(TARGET_PREBUILT_KERNEL),)
- LOCAL_KERNEL := device/samsung/galaxysmtd/kernel
-else
- LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
-endif
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_KERNEL):kernel
-
-PRODUCT_COPY_FILES += \
- device/samsung/aries-common/updater.sh:updater.sh
-
-# See comment at the top of this file. This is where the other
-# half of the device-specific product definition file takes care
-# of the aspects that require proprietary drivers that aren't
-# commonly available
-$(call inherit-product-if-exists, vendor/samsung/galaxysmtd/galaxysmtd-vendor.mk)

0 comments on commit 1935a5b

Please sign in to comment.