Blueprint and construction guide
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
.gitignore
README.md
template.odg
template.pdf
template_full.odg
template_full.png
template_location.png
template_module.png
template_screen.png
wireframe_3x7_60x30mm.ods
wireframe_3x7_60x30mm.pdf

README.md

Carton

Cheap Augmented Reality Tool

This DIY project aims to provide an easy and cheap way to get your own augmented reality headset.

Press and Litterature

Make your own Carton Augemented Reality glasses

Before starting be sure you have all the tools and materials needed.

Tools

  • Utility knife
  • Scissor
  • Ruler
  • Glue stick

Materials

  • Printed template
  • 2 pieces of cardboard - 380x260mm and 240x170mm
  • Mirror - 60x60mm
  • Transparent plastic sheet - 105x50mm
  • Sponge
  • Flat stir stick
  • Stretch utility strap
  • Rubber band
  • Adhesive tap
Advice

The plastic sheet will be used for the screen. You should avoid to getting one thicker than 0.25mm otherwise the result will be blurred because Pepper's ghost effect appear on each side.

Steps

See also this video tutorial

  1. Join parts 1 and 2 of your template according to the legend. You should get some like this : Alt text
  2. Glue the full template onto cardboard
  3. Cut out the cardboard following each continuous line (every thin continuous line, even the little ones where you will have to fold)
  4. Fold for each arrow (in any order) to the correct side according to the legend
  5. Cut the inside part - bold continuous line (this steps after first folding because removing inside part makes the cardboard weaker)
  6. Put your rubber band around the cardboard according to the legend for the location
  7. Break the flat stir stick to make it 135mm
  8. Tap the transparent plastic sheet to the flat stir stick
  9. Construct the mirror module
  10. Construct the headset by folding again but following the ordered numbers. You should get something similar to this very simplified 3D template : Alt text
  • Add adhesive 1 and 2 after folding 1
  • Add adhesive 3 after folding 7
  • Insert the plastic sheet with the flat stir stick before folding 11
  • Add adhesive 4 after folding 12 Alt text
  1. Use double sided-adhesive or glue stick to stick the sponge in his location Alt text

  2. Insert the stretch utility strap

That's it ! Finish