Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: master
Fetching contributors…

Cannot retrieve contributors at this time

executable file 162 lines (136 sloc) 4.782 kb
#!/bin/sh
CWD=`pwd`
WORKDIR=sandbox
SRCDIR=${BSDSRCDIR:-/usr/src}
DESTDIR=${DESTDIR:-${CWD}/${WORKDIR}}
KERNELFILE=${KERNELFILE:-${CWD}/obj/bsd.gz}
SUDO=sudo
DEVICE=vnd0
MOUNTPOINT=/mnt
TEMPFILE=/tmp/build-diskimage.tmp.$$
DUID=${2}
# drive geometry information -- get the right one for your flash!!
# 128 MB cards
totalsize=250880 # "total sectors:"
bytessec=512 # "bytes/sector:"
sectorstrack=32 # "sectors/track:"
sectorscylinder=256 # "sectors/cylinder:"
trackscylinder=8 # "tracks/cylinder:"
cylinders=980 # "cylinders:"
# 256 MB cards
#totalsize=501760 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=32 # "sectors/track:"
#sectorscylinder=512 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=980 # "cylinders:"
# 489 MB cards
#totalsize=1001952 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=63 # "sectors/track:"
#sectorscylinder=1008 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=994 # "cylinders:"
# Don't start without a imagefile as a parameter
if [ "$1" = "" ] || [ "$DUID" = "" ]; then
echo "usage: $0 imagefile duid"
exit 1
fi
IMAGEFILE=$1
# Does the kernel exist at all
if [ ! -r $KERNELFILE ]; then
echo "ERROR! $KERNELFILE does not exist or is not readable."
exit 1
fi
# Check DUID format (hex and 16 char long string)
if [[ "$DUID" != +([[:xdigit:]]) ]] || [[ ${#DUID} != 16 ]]; then
echo "DUID: ${DUID} is not a 16-character hexadecimal string"
exit
fi;
echo "Building usb image with duid ${DUID}..."
echo "Cleanup if something failed the last time... (ignore any not currently mounted and Device not configured warnings)"
${SUDO} umount $MOUNTPOINT
${SUDO} vnconfig -u $DEVICE
echo ""
echo "Creating an image file, if one doesn't exist..."
if [ ! -f $IMAGEFILE ] ; then
dd if=/dev/zero of=$IMAGEFILE bs=$bytessec count=$totalsize
fi
echo ""
echo "Mounting the imagefile as a device..."
${SUDO} vnconfig -c $DEVICE $IMAGEFILE
echo ""
echo "Running fdisk... (Ignore any sysctl(machdep.bios.diskinfo): Device not configured warnings)"
${SUDO} fdisk -c $cylinders -h $trackscylinder -s $sectorstrack -f ${DESTDIR}/usr/mdec/mbr -e $DEVICE << __EOC >/dev/null
reinit
update
write
quit
__EOC
let asize=$totalsize-$sectorstrack
echo "type: SCSI" >> $TEMPFILE
echo "disk: SCSI disk" >> $TEMPFILE
echo "label: fictitious" >> $TEMPFILE
echo "flags:" >> $TEMPFILE
echo "bytes/sector: ${bytessec}" >> $TEMPFILE
echo "sectors/track: ${sectorstrack}" >> $TEMPFILE
echo "tracks/cylinder: ${trackscylinder}" >> $TEMPFILE
echo "sectors/cylinder: ${sectorscylinder}" >> $TEMPFILE
echo "cylinders: ${cylinders}" >> $TEMPFILE
echo "total sectors: ${totalsize}" >> $TEMPFILE
echo "rpm: 3600" >> $TEMPFILE
echo "interleave: 1" >> $TEMPFILE
echo "trackskew: 0" >> $TEMPFILE
echo "cylinderskew: 0" >> $TEMPFILE
echo "headswitch: 0 " >> $TEMPFILE
echo "track-to-track seek: 0 " >> $TEMPFILE
echo "drivedata: 0 " >> $TEMPFILE
echo "" >> $TEMPFILE
echo "16 partitions:" >> $TEMPFILE
echo "a: $asize $sectorstrack 4.2BSD 2048 16384 16" >> $TEMPFILE
echo "c: $totalsize 0 unused 0 0" >> $TEMPFILE
echo ""
echo "Installing disklabel..."
${SUDO} disklabel -R $DEVICE $TEMPFILE
rm $TEMPFILE
echo ""
echo "Using disklabel to set duid to ${DUID}..."
${SUDO} disklabel -E $DEVICE << __EOC >/dev/null
i
${DUID}
write
quit
__EOC
echo ""
echo "Creating new filesystem..."
${SUDO} newfs -q /dev/r${DEVICE}a
echo ""
echo "Mounting destination to ${MOUNTPOINT}..."
if ! ${SUDO} mount -o async /dev/${DEVICE}a ${MOUNTPOINT}; then
echo Mount failed..
exit
fi
echo ""
echo "Copying bsd kernel, boot blocks and /etc/boot.conf..."
${SUDO} cp ${DESTDIR}/usr/mdec/boot ${MOUNTPOINT}/boot
${SUDO} cp ${KERNELFILE} ${MOUNTPOINT}/bsd
${SUDO} mkdir ${MOUNTPOINT}/etc
${SUDO} cp ${CWD}/${WORKDIR}/initial-conf/boot.conf.usb ${MOUNTPOINT}/etc/boot.conf
echo ""
echo "Installing boot blocks..."
${SUDO} /usr/mdec/installboot ${MOUNTPOINT}/boot ${DESTDIR}/usr/mdec/biosboot ${DEVICE}
${SUDO} mkdir ${MOUNTPOINT}/conf
${SUDO} mkdir ${MOUNTPOINT}/pkg
# Here is where you add your own packages and configuration to the flash...
echo ""
echo "Unmounting and cleaning up..."
${SUDO} umount $MOUNTPOINT
${SUDO} vnconfig -u $DEVICE
echo ""
echo "And we are done..."
echo "Run \"mountimage.sh $IMAGEFILE\" to add configuration and packages."
echo "When you are done with the configuration, gzip the imagefile and move"
echo "it to the system with a flashwriter."
echo "Use \"gunzip -c image.gz | dd of=/dev/sd0c\" on unix to write to flash"
echo "On Windows you can use http://m0n0.ch/wall/physdiskwrite.php"
echo "Both these utilities allow the gzipped image to be used directly."
Jump to Line
Something went wrong with that request. Please try again.