Permalink
Find file
Fetching contributors…
Cannot retrieve contributors at this time
77 lines (76 sloc) 1.69 KB
acceleration = 25
bed_size = 330,330
bed_temperature = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 30
complete_objects = 0
cooling = 0
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 3
fill_angle = 45
fill_density = 0.4
fill_pattern = honeycomb
first_layer_bed_temperature = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 30%
first_layer_temperature = 185
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 15
infill_every_layers = 1
infill_extrusion_width = 0
infill_speed = 100
layer_gcode =
layer_height = 0.28
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
notes =
nozzle_diameter = 0.5
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 15
perimeter_speed = 100
perimeters = 3
perimeters_extrusion_width = 0
post_process =
print_center = 100,125
randomize_start = 1
retract_before_travel = 2
retract_length = 1.5
retract_lift = 0
retract_restart_extra = 0
retract_speed = 70
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 3
slowdown_below_layer_time = 15
small_perimeter_speed = 60
solid_fill_pattern = rectilinear
solid_infill_speed = 100
solid_layers = 3
start_gcode = G28; home all axes
support_material = 0
support_material_tool = 0
temperature = 185
threads = 8
top_solid_infill_speed = 90
travel_speed = 130
use_relative_e_distances = 0
z_offset = 0.03