Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
391 lines (291 sloc) 16.4 KB
What's new in Libevent 2.1
Nick Mathewson
0. Before we start
0.1. About this document
This document describes the key differences between Libevent 2.0 and
Libevent 2.1, from a user's point of view. It's a work in progress.
For better documentation about libevent, see the links at
Libevent 2.1 would not be possible without the generous help of
numerous volunteers. For a list of who did what in Libevent 2.1,
please see the ChangeLog!
NOTE: I am very sure that I missed some thing on this list. Caveat
0.2. Where to get help
Try looking at the other documentation too. All of the header files
have documentation in the doxygen format; this gets turned into nice
HTML and linked to from the website.
There is a work-in-progress book with reference manual at .
You can ask questions on the #libevent IRC channel at or
on the mailing list at The mailing list
is subscribers-only, so you will need to subscribe before you post.
0.3. Compatibility
Our source-compatibility policy is that correct code (that is to say,
code that uses public interfaces of Libevent and relies only on their
documented behavior) should have forward source compatibility: any
such code that worked with a previous version of Libevent should work
with this version too.
We don't try to do binary compatibility except within stable release
series, so binaries linked against any version of Libevent 2.0 will
probably need to be recompiled against Libevent 2.1.1-alpha if you
want to use it. It is probable that we'll break binary compatibility
again before Libevent 2.1 is stable.
1. New APIs and features
1.1. New ways to build libevent
We now provide an --enable-gcc-hardening configure option to turn on
GCC features designed for increased code security.
There is also an --enable-silent-rules configure option to make
compilation run more quietly with automake 1.11 or later.
You no longer need to use the --enable-gcc-warnings option to turn on
all of the GCC warnings that Libevent uses. The only change from
using that option now is to turn warnings into errors.
For IDE users, files that are not supposed to be built are now
surrounded with appropriate #ifdef lines to keep your IDE from getting
1.2. New functions for events and the event loop
If you're running Libevent with multiple event priorities, you might
want to make sure that Libevent checks for new events frequently, so
that time-consuming or numerous low-priority events don't keep it from
checking for new high-priority events. You can now use the
event_config_set_max_dispatch_interval() interface to ensure that the
loop checks for new events either every N microseconds, every M
callbacks, or both.
There is an EVLOOP_NO_EXIT_ON_EMPTY flag that tells event_base_loop()
to keep looping even when there are no pending events. (Ordinarily,
event_base_loop() will exit as soon as no events are pending.)
Past versions of Libevent have been annoying to use with some
memory-leak-checking tools, because Libevent allocated some global
singletons but provided no means to free them. There is now a
function, libevent_global_shutdown(), that you can use to free all
globally held resources before exiting, so that your leak-check tools
don't complain. (Note: this function doesn't free non-global things
like events, bufferevents, and so on; and it doesn't free anything
that wouldn't otherwise get cleaned up by the operating system when
your process exit()s. If you aren't using a leak-checking tool, there
is not much reason to call libevent_global_shutdown().)
There is a new event_base_get_npriorities() function to return the
number of priorities set in the event base.
Libevent 2.0 added an event_new() function to construct a new struct
event on the heap. Unfortunately, with event_new(), there was no
equivalent for:
struct event ev;
event_assign(&ev, base, fd, EV_READ, callback, &ev);
In other words, there was no easy way for event_new() to set up an
event so that the event itself would be its callback argument.
Libevent 2.1 lets you do this by passing "event_self_cbarg()" as the
callback argument:
struct event *evp;
evp = event_new(base, fd, EV_READ, callback,
There's also a new event_base_get_running_event() function you can
call from within a Libevent callback to get a pointer to the current
event. This should never be strictly necessary, but it's sometimes
1.3. New debugging features
You can now turn on debug logs at runtime using a new function,
There's also been some work done to try to make the debugging logs
more generally useful.
1.4. New evbuffer functions
In Libevent 2.0, we introduced evbuffer_add_file() to add an entire
file's contents to an evbuffer, and then send them using sendfile() or
mmap() as appropriate. This API had some drawbacks, however.
Notably, it created one mapping or fd for every instance of the same
file added to any evbuffer. Also, adding a file to an evbuffer could
make that buffer unusable with SSL bufferevents, filtering
bufferevents, and any code that tried to read the contents of the
Libevent 2.1 adds a new evbuffer_file_segment API to solve these
problems. Now, you can use evbuffer_file_segment_new() to construct a
file-segment object, and evbuffer_add_file_segment() to insert it (or
part of it) into an evbuffer. These segments avoid creating redundant
maps or fds. Better still, the code is smart enough (when the OS
supports sendfile) to map the file when that's necessary, and use
sendfile() otherwise.
The evbuffer_ptr interface has been extended so that an evbuffer_ptr
can now yield a point just after the end of the buffer. This makes
many algorithms simpler to implement.
There's a new evbuffer_add_buffer() interface that you can use to add
one buffer to another nondestructively. When you say
evbuffer_add_buffer_reference(outbuf, inbuf), outbuf now contains a
reference to the contents of inbuf.
To aid in adding data in bulk while minimizing evbuffer calls, there
is an evbuffer_add_iovec() function.
There's a new evbuffer_copyout_from() variant function to enable
copying data nondestructively from the middle of a buffer.
evbuffer_readln() now supports an EVBUFFER_EOL_NUL argument to fetch
NUL-terminated strings from buffers.
1.5. New functions and features: bufferevents
You can now use the bufferevent_getcb() function to find out a
bufferevent's callbacks. Previously, there was no supported way to do
The largest chunk readable or writeable in a single bufferevent
callback is no longer hardcoded; it's now configurable with
the new functions bufferevent_set_max_single_read() and
For consistency, OpenSSL bufferevents now make sure to always set one
of BEV_EVENT_READING or BEV_EVENT_WRITING when invoking an event callback.
1.6. New functions and features: evdns
The previous evdns interface used an "open a test UDP socket" trick in
order to detect IPv6 support. This was a hack, since it would
sometimes badly confuse people's firewall software, even though no
packets were sent. The current evdns interface-detection code uses
the appropriate OS functions to see which interfaces are configured.
1.7. New functions and features: evconnlistener
Libevent 2.1 adds the following evconnlistener flags:
LEV_OPT_DEFERRED_ACCEPT -- Tells the OS that it doesn't need to
report sockets as having arrived until the initiator has sent some
data too. This can greatly improve performance with protocols like
HTTP where the client always speaks first. On operating systems
that don't support this functionality, this option has no effect.
LEV_OPT_DISABLED -- Creates an evconnlistener in the disabled (not
listening) state.
Libevent 2.1 changes the behavior of the LEV_OPT_CLOSE_ON_EXEC
flag. Previously, it would apply to the listener sockets, but not to
the accepted sockets themselves. That's almost never what you want.
Now, it applies both to the listener and the accepted sockets.
1.8. New functions and features: evhttp
NOTE: The evhttp module will eventually be deprecated in favor of Mark
Ellzey's libevhtp library. Don't worry -- this won't happen until
libevhtp provides every feature that evhttp does, and provides a
compatible interface that applications can use to migrate.
Previously, you could only set evhttp timeouts in increments of one
second. Now, you can use evhttp_set_timeout_tv() and
evhttp_connection_set_timeout_tv() to configure
microsecond-granularity timeouts.
There are a new pair of functions: evhttp_set_bevcb() and
evhttp_connection_base_bufferevent_new(), that you can use to
configure which bufferevents will be used for incoming and outgoing
http connections respectively. These functions, combined with SSL
bufferevents, should enable HTTPS support.
There's a new evhttp_foreach_bound_socket() function to iterate over
every listener on an evhttp object.
2. Cross-platform performance improvements
2.1. Better data structures
We replaced several users of the sys/queue.h "TAILQ" data structure
with the "LIST" data structure. Because this data type doesn't
require FIFO access, it requires fewer pointer checks and
manipulations to keep it in line.
All previous versions of Libevent have kept every pending (added)
event in an "eventqueue" data structure. Starting in Libevent 2.0,
however, this structure became redundant: every pending timeout event
is stored in the timeout heap or in one of the common_timeout queues,
and every pending fd or signal event is stored in an evmap. Libevent
2.1 removes this data structure, and thereby saves all of the code
that we'd been using to keep it updated.
2.2. Faster activations and timeouts
It's a common pattern in older code to use event_base_once() with a
0-second timeout to ensure that a callback will get run 'as soon as
possible' in the current iteration of the Libevent loop. We optimize
this case by calling event_active() directly, and bypassing the
timeout pool. (People who are using this pattern should also consider
using event_active() themselves.)
Libevent 2.0 would wake up a polling event loop whenever the first
timeout in the event loop was adjusted--whether it had become earlier
or later. We now only notify the event loop when a change causes the
expiration time to become _sooner_ than it would have been otherwise.
The timeout heap code is now optimized to perform fewer comparisons
and shifts when changing or removing a timeout.
Instead of checking for a wall-clock time jump every time we call
clock_gettime(), we now check only every 5 seconds. This should save
a huge number of gettimeofday() calls.
2.3. Microoptimizations
Internal event list maintainance no longer use the antipattern where
we have one function with multiple totally independent behaviors
depending on an argument:
#define OP1 1
#define OP2 2
#define OP3 3
void func(int operation, struct event *ev) {
switch (op) {
Instead, these functions are now split into separate functions for
each operation:
void func_op1(struct event *ev) { ... }
void func_op2(struct event *ev) { ... }
void func_op3(struct event *ev) { ... }
This produces better code generation and inlining decisions on some
compilers, and makes the code easier to read and check.
2.4. Evbuffer performance improvements
The EVBUFFER_EOL_CRLF line-ending type is now much faster, thanks to
smart optimizations.
2.5. HTTP performance improvements
o Performance tweak to evhttp_parse_request_line. (aee1a97 Mark Ellzey)
o Add missing break to evhttp_parse_request_line (0fcc536)
3. Backend/OS-specific improvements
3.1. Linux-specific improvements
The logic for deciding which arguements to use with epoll_ctl() is now
a table-driven lookup, rather than the previous pile of cascading
branches. This should minimize epoll_ctl() calls and make the epoll
code run a little faster on change-heavy loads.
Libevent now takes advantage of Linux's support for enhanced APIs
(e.g., SOCK_CLOEXEC, SOCK_NONBLOCK, accept4, pipe2) that allow us to
simultaneously create a socket, make it nonblocking, and make it
close-on-exec. This should save syscalls throughout our codebase, and
avoid race-conditions if an exec() occurs after a socket is socket is
created but before we can make it close-on-execute on it.
3.2. Windows-specific improvements
We now use GetSystemTimeAsFileTime to implement gettimeofday. It's
significantly faster and more accurate than our old ftime()-based approach.
3.3. Improvements in the solaris evport backend.
The evport backend has been updated to use many of the infrastructure
improvements from Libevent 2.0. Notably, it keeps track of per-fd
information using the evmap infrastructure, and removes a number of
linear scans over recently-added events. This last change makes it
efficient to receive many more events per evport_getn() call, thereby
reducing evport overhead in general.
3.4. OSX backend improvements
The OSX select backend doesn't like to have more than a certain number
of fds set unless an "unlimited select" option has been set.
Therefore, we now set it.
4. Infrastructure improvements
4.1. Faster tests
I've spent some time to try to make the unit tests run faster in
Libevent 2.1. Nearly all of this was a matter of searching slow tests
for unreasonably long timeouts, and cutting them down to reasonably
long delays, though on one or two cases I actually had to parallelize
an operation or improve an algorithm.
On my desktop, a full "make verify" run of Libevent 2.0.18-stable
requires about 218 seconds. Libevent 2.1.1-alpha cuts this down to
about 78 seconds.
Faster unit tests are great, since they let programmers test their
changes without losing their train of thought.
4.2. Portability
Libevent now uses large-file support internally on platforms where it
matters. You shouldn't need to set _LARGEFILE or OFFSET_BITS or
anything magic before including the Libevent headers, either, since
Libevent now sets the size of ev_off_t to the size of off_t that it
received at compile time, not to some (possibly different) size based
on current macro definitions when your program is building.
We now also use the Autoconf AC_USE_SYSTEM_EXTENSIONS mechanism to
enable per-system macros needed to enable not-on-by-default features.
Unlike the rest of the autoconf macros, we output these to an
internal-use-only evconfig-private.h header, since their names need to
survive unmangled. This lets us build correctly on more platforms,
and avoid inconsistencies when some files define _GNU_SOURCE and
others don't.
Libevent now tries to detect OpenSSL via pkg-config.
4.3. Standards conformance
Previous Libevent versions had no consistent convention for internal
vs external identifiers, and used identifiers starting with the "_"
character throughout the codebase. That's no good, since the C
standard says that identifiers beginning with _ are reserved. I'm not
aware of having any collisions with system identifiers, but it's best
to fix these things before they cause trouble.
We now avoid all use of the _identifiers in the Libevent source code.
These changes were made *mainly* through the use of automated scripts,
so there shouldn't be any mistakes, but you never know.
As an exception, the names _EVENT_LOG_DEBUG, _EVENT_LOG_MSG_,
_EVENT_LOG_WARN, and _EVENT_LOG_ERR are still exposed in event.h: they
are now deprecated, but to support older code, they will need to stay
around for a while. New code should use EVENT_LOG_DEBUG,
5. Testing
Libevent's test coverage level is more or less unchanged sine before:
we still have over 80% line coverage in our tests on Linux and OSX.
There are some under-tested modules, though: we need to fix those.
Jump to Line
Something went wrong with that request. Please try again.