Skip to content
TinyCLR library for the BME280 Humidity, Barometric Pressure + Temp sensor.
Branch: master
Clone or download
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Build increased patch number Jun 8, 2019
Docs Initial commit May 16, 2019
Source fixing more bugs Jun 8, 2019
.gitattributes Initial commit May 16, 2019
.gitignore Initial commit May 16, 2019
LICENSE Initial commit May 16, 2019
Monoculture.TinyCLR.Drivers.BME280.sln Update Monoculture.TinyCLR.Drivers.BME280.sln Jun 9, 2019
README.md Initial commit May 16, 2019

README.md

Build Status

Monoculture.TinyCLR.Drivers.BME280

TinyCLR library for the BME280 Humidity, Barometric Pressure + Temp sensor.

Recommended Modes

Based on Bosch BME280I2C environmental sensor data sheet.

Weather Monitoring : forced mode, 1 sample/minute pressure ×1, temperature ×1, humidity ×1, filter off Current Consumption = 0.16 μA RMS Noise = 3.3 Pa/30 cm, 0.07 %RH Data Output Rate 1/60 Hz

Humidity Sensing : forced mode, 1 sample/second pressure ×0, temperature ×1, humidity ×1, filter off Current Consumption = 2.9 μA RMS Noise = 0.07 %RH Data Output Rate = 1 Hz

Indoor Navigation : normal mode, standby time = 0.5ms pressure ×16, temperature ×2, humidity ×1, filter = x16 Current Consumption = 633 μA RMS Noise = 0.2 Pa/1.7 cm Data Output Rate = 25Hz Filter Bandwidth = 0.53 Hz Response Time (75%) = 0.9 s

Gaming : normal mode, standby time = 0.5ms pressure ×4, temperature ×1, humidity ×0, filter = x16 Current Consumption = 581 μA RMS Noise = 0.3 Pa/2.5 cm Data Output Rate = 83 Hz Filter Bandwidth = 1.75 Hz Response Time (75%) = 0.3 s

You can’t perform that action at this time.