Skip to content
firmware marlin 1.6 support micromake C1
Branch: master
Clone or download
Montri Soymukda
Montri Soymukda jumper
Latest commit d329a57 Dec 14, 2017
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Marlin
images
README.md jumper Dec 14, 2017

README.md

marlin1.6-mcro-c1

firmware marlin 1.6 support micromake C1 fixed. homing (z) slow and ENDSTOP PIN for mini micromake board Default

  • Enable Heat Bed
  • Power Supply 1
  • 64 steps per unit
  • No auto bed level

Prerequisite

  • Mini micromaker board controller
  • arduino 1.8x IDE

choose your micro step per step configuration ( 64 default settings )

arduion-ied step

//#define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 150 }       // 16  steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 200, 300 }       // 32  steps per unit for Micromake C1 - Custom  Settings - ( MS1 : closed ; MS2 : open   on MAKEBOARD Mini)
#define DEFAULT_AXIS_STEPS_PER_UNIT   {400, 400, 400, 600 }       // 64  steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT   { 800, 800, 800, 1200 }      // 128 steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : open   on MAKEBOARD Mini)

arduion-ied step

How to Upload Firmware

  • Select Processer (ATmega2560) and prot (ex. com5 for window ) arduion-ied step
  • Open marlin firmeware arduion-ied step
You can’t perform that action at this time.