Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
569 lines (526 sloc) 25.4 KB
#.rst:
# Find Corrade
# ------------
#
# Finds the Corrade library. Basic usage::
#
# find_package(Corrade REQUIRED)
#
# This module tries to find the base Corrade library and then defines the
# following:
#
# Corrade_FOUND - Whether the base library was found
# CORRADE_LIB_SUFFIX_MODULE - Path to CorradeLibSuffix.cmake module
# CORRADE_INCLUDE_INSTALL_PREFIX - Prefix where to put platform-independent
# include and other files, defaults to ``.``. If a relative path is used,
# it's relative to :variable:`CMAKE_INSTALL_PREFIX`.
#
# This command will try to find only the base library, not the optional
# components, which are:
#
# Containers - Containers library
# PluginManager - PluginManager library
# TestSuite - TestSuite library
# Utility - Utility library
# rc - corrade-rc executable
#
# Example usage with specifying additional components is::
#
# find_package(Corrade REQUIRED Utility TestSuite)
#
# For each component is then defined:
#
# Corrade_*_FOUND - Whether the component was found
# Corrade::* - Component imported target
#
# The package is found if either debug or release version of each library is
# found. If both debug and release libraries are found, proper version is
# chosen based on actual build configuration of the project (i.e. Debug build
# is linked to debug libraries, Release build to release libraries).
#
# Corrade conditionally defines ``CORRADE_IS_DEBUG_BUILD`` preprocessor
# variable in case build configuration is ``Debug`` (not Corrade itself, but
# build configuration of the project using it). Useful e.g. for selecting
# proper plugin directory.
#
# Corrade defines the following custom target properties:
#
# CORRADE_CXX_STANDARD - C++ standard to require when compiling given
# target. Does nothing if :variable:`CMAKE_CXX_FLAGS` already contains
# particular standard setting flag or if given target contains
# :prop_tgt:`CMAKE_CXX_STANDARD` property. Allowed value is 11, 14 or 17.
# INTERFACE_CORRADE_CXX_STANDARD - C++ standard to require when using given
# target. Does nothing if :variable:`CMAKE_CXX_FLAGS` already contains
# particular standard setting flag or if given target contains
# :prop_tgt:`CMAKE_CXX_STANDARD` property. Allowed value is 11, 14 or 17.
# CORRADE_USE_PEDANTIC_FLAGS - Enable additional compiler/linker flags.
# Boolean.
#
# These properties are inherited from directory properties, meaning that if you
# set them on directories, they get implicitly set on all targets in given
# directory (with a possibility to do target-specific overrides). All Corrade
# libraries have the :prop_tgt:`INTERFACE_CORRADE_CXX_STANDARD` property set to
# 11, meaning that you will always have at least C++11 enabled once you link to
# any Corrade library.
#
# Features of found Corrade library are exposed in these variables:
#
# CORRADE_MSVC2019_COMPATIBILITY - Defined if compiled with compatibility
# mode for MSVC 2019
# CORRADE_MSVC2017_COMPATIBILITY - Defined if compiled with compatibility
# mode for MSVC 2017
# CORRADE_MSVC2015_COMPATIBILITY - Defined if compiled with compatibility
# mode for MSVC 2015
# CORRADE_BUILD_DEPRECATED - Defined if compiled with deprecated APIs
# included
# CORRADE_BUILD_STATIC - Defined if compiled as static libraries.
# Default are shared libraries.
# CORRADE_BUILD_MULTITHREADED - Defined if compiled in a way that makes it
# possible to safely use certain Corrade features simultaenously in multiple
# threads
# CORRADE_TARGET_UNIX - Defined if compiled for some Unix flavor
# (Linux, BSD, macOS)
# CORRADE_TARGET_APPLE - Defined if compiled for Apple platforms
# CORRADE_TARGET_IOS - Defined if compiled for iOS (device or
# simulator)
# CORRADE_TARGET_IOS_SIMULATOR - Defined if compiled for iOS Simulator
# CORRADE_TARGET_WINDOWS - Defined if compiled for Windows
# CORRADE_TARGET_WINDOWS_RT - Defined if compiled for Windows RT
# CORRADE_TARGET_EMSCRIPTEN - Defined if compiled for Emscripten
# CORRADE_TARGET_ANDROID - Defined if compiled for Android
# CORRADE_PLUGINMANAGER_NO_DYNAMIC_PLUGIN_SUPPORT - Defined if PluginManager
# doesn't support dynamic plugin loading due to platform limitations
# CORRADE_TESTSUITE_TARGET_XCTEST - Defined if TestSuite is targetting Xcode
# XCTest
# CORRADE_UTILITY_USE_ANSI_COLORS - Defined if ANSI escape sequences are used
# for colored output with Utility::Debug on Windows
#
# Additionally these variables are defined for internal usage:
#
# CORRADE_INCLUDE_DIR - Root include dir
# CORRADE_*_LIBRARY_DEBUG - Debug version of given library, if found
# CORRADE_*_LIBRARY_RELEASE - Release version of given library, if found
# CORRADE_*_EXECUTABLE - Location of given executable, if found
# CORRADE_USE_MODULE - Path to UseCorrade.cmake module (included
# automatically)
# CORRADE_TESTSUITE_XCTEST_RUNNER - Path to XCTestRunner.mm.in file
# CORRADE_TESTSUITE_ADB_RUNNER - Path to AdbRunner.sh file
# CORRADE_PEDANTIC_COMPILER_OPTIONS - List of pedantic compiler options used
# for targets with :prop_tgt:`CORRADE_USE_PEDANTIC_FLAGS` enabled
# CORRADE_PEDANTIC_COMPILER_DEFINITIONS - List of pedantic compiler
# definitions used for targets with :prop_tgt:`CORRADE_USE_PEDANTIC_FLAGS`
# enabled
#
# Workflows without :prop_tgt:`IMPORTED` targets are deprecated and the
# following variables are included just for backwards compatibility and only if
# :variable:`CORRADE_BUILD_DEPRECATED` is enabled:
#
# CORRADE_CXX_FLAGS - Pedantic compile flags. Use
# :prop_tgt:`CORRADE_USE_PEDANTIC_FLAGS` property or
# :variable:`CORRADE_PEDANTIC_COMPILER_DEFINITIONS` /
# :variable:`CORRADE_PEDANTIC_COMPILER_OPTIONS` list variables instead.
#
# Corrade provides these macros and functions:
#
# .. command:: corrade_add_test
#
# Add unit test using Corrade's TestSuite::
#
# corrade_add_test(<test name>
# <sources>...
# [LIBRARIES <libraries>...]
# [FILES <files>...]
# [ARGUMENTS <arguments>...])
#
# Test name is also executable name. You can use ``LIBRARIES`` to specify
# libraries to link with instead of using :command:`target_link_libraries()`.
# The ``Corrade::TestSuite`` target is linked automatically to each test. Note
# that the :command:`enable_testing()` function must be called explicitly.
# Arguments passed after ``ARGUMENTS`` will be appended to the test
# command line. ``ARGUMENTS`` are supported everywhere except when
# ``CORRADE_TESTSUITE_TARGET_XCTEST`` is enabled.
#
# You can list files needed by the test in the ``FILES`` section. If given
# filename is relative, it is treated relatively to `CMAKE_CURRENT_SOURCE_DIR`.
# The files are added to the :prop_test:`REQUIRED_FILES` target property. On
# Emscripten they are bundled to the executable and available in the virtual
# filesystem root. On Android they are copied along the executable to the
# target. In case of Emscripten and Android, if the file is absolute or
# contains ``..``, only the leaf name is used. Alternatively you can have a
# filename formatted as ``<input>@<output>``, in which case the ``<input>`` is
# treated as local filesystem location and ``<output>`` as remote/virtual
# filesystem location. The remote location can't be absolute or contain ``..``
# / ``@`` characters.
#
# Unless :variable:`CORRADE_TESTSUITE_TARGET_XCTEST` is set, test cases on iOS
# targets are created as bundles with bundle identifier set to CMake project
# name by default. Use the cache variable :variable:`CORRADE_TESTSUITE_BUNDLE_IDENTIFIER_PREFIX`
# to change it to something else.
#
# .. command:: corrade_add_resource
#
# Compile data resources into application binary::
#
# corrade_add_resource(<name> <resources.conf>)
#
# Depends on ``Corrade::rc``, which is part of Corrade utilities. This command
# generates resource data using given configuration file in current build
# directory. Argument name is name under which the resources can be explicitly
# loaded. Variable ``<name>`` contains compiled resource filename, which is
# then used for compiling library / executable. On CMake >= 3.1 the
# `resources.conf` file can contain UTF-8-encoded filenames. Example usage::
#
# corrade_add_resource(app_resources resources.conf)
# add_executable(app source1 source2 ... ${app_resources})
#
# .. command:: corrade_add_plugin
#
# Add dynamic plugin::
#
# corrade_add_plugin(<plugin name>
# "<debug binary install dir>;<debug library install dir>"
# "<release binary install dir>;<release library install dir>"
# <metadata file>
# <sources>...)
#
# The macro adds preprocessor directive ``CORRADE_DYNAMIC_PLUGIN``. Additional
# libraries can be linked in via :command:`target_link_libraries(plugin_name ...) <target_link_libraries>`.
# On DLL platforms, the plugin DLLs and metadata files are put into
# ``<debug binary install dir>``/``<release binary install dir>`` and the
# ``*.lib`` files into ``<debug library install dir>``/``<release library install dir>``.
# On non-DLL platforms everything is put into ``<debug library install dir>``/
# ``<release library install dir>``.
#
# corrade_add_plugin(<plugin name>
# <debug install dir>
# <release install dir>
# <metadata file>
# <sources>...)
#
# Unline the above version this puts everything into ``<debug install dir>`` on
# both DLL and non-DLL platforms. If ``<debug install dir>`` is set to
# :variable:`CMAKE_CURRENT_BINARY_DIR` (e.g. for testing purposes), the files
# are copied directly, without the need to perform install step. Note that the
# files are actually put into configuration-based subdirectory, i.e.
# ``${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}``. See documentation of
# :variable:`CMAKE_CFG_INTDIR` variable for more information.
#
# .. command:: corrade_add_static_plugin
#
# Add static plugin::
#
# corrade_add_static_plugin(<plugin name>
# "<binary install dir>;<library install dir>"
# <metadata file>
# <sources>...)
#
# The macro adds preprocessor directive ``CORRADE_STATIC_PLUGIN``. Additional
# libraries can be linked in via :command:`target_link_libraries(plugin_name ...) <target_link_libraries>`.
# The ``<binary install dir>`` is ignored and included just for compatibility
# with the :command:`corrade_add_plugin` command, everything is installed into
# ``<library install dir>``. Note that plugins built in debug configuration
# (e.g. with :variable:`CMAKE_BUILD_TYPE` set to ``Debug``) have ``"-d"``
# suffix to make it possible to have both debug and release plugins installed
# alongside each other.
#
# corrade_add_static_plugin(<plugin name>
# <install dir>
# <metadata file>
# <sources>...)
#
# Equivalent to the above with ``<library install dir>`` set to ``<install dir>``.
# If ``<install dir>`` is set to :variable:`CMAKE_CURRENT_BINARY_DIR` (e.g. for
# testing purposes), no installation rules are added.
#
# .. command:: corrade_find_dlls_for_libs
#
# Find corresponding DLLs for library files::
#
# corrade_find_dlls_for_libs(<output variable> <libs>...)
#
# Available only on Windows, for all ``*.lib`` files tries to find
# corresponding DLL file. Useful for bundling dependencies for e.g. WinRT
# packages.
#
#
# This file is part of Corrade.
#
# Copyright © 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016,
# 2017, 2018, 2019 Vladimír Vondruš <mosra@centrum.cz>
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included
# in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
# DEALINGS IN THE SOFTWARE.
#
# Root include dir
find_path(CORRADE_INCLUDE_DIR
NAMES Corrade/Corrade.h)
mark_as_advanced(CORRADE_INCLUDE_DIR)
# Configuration file
find_file(_CORRADE_CONFIGURE_FILE configure.h
HINTS ${CORRADE_INCLUDE_DIR}/Corrade/)
mark_as_advanced(_CORRADE_CONFIGURE_FILE)
# We need to open configure.h file from CORRADE_INCLUDE_DIR before we check for
# the components. Bail out with proper error message if it wasn't found. The
# complete check with all components is further below.
if(NOT CORRADE_INCLUDE_DIR)
include(FindPackageHandleStandardArgs)
find_package_handle_standard_args(Corrade
REQUIRED_VARS CORRADE_INCLUDE_DIR _CORRADE_CONFIGURE_FILE)
endif()
# Read flags from configuration
file(READ ${_CORRADE_CONFIGURE_FILE} _corradeConfigure)
set(_corradeFlags
# WARNING: CAREFUL HERE, the string(FIND) succeeds even if a subset is
# found -- so e.g. looking for TARGET_GL will match TARGET_GLES2 as well.
# So far that's not a problem, but might become an issue for new flags.
MSVC2015_COMPATIBILITY
MSVC2017_COMPATIBILITY
MSVC2019_COMPATIBILITY
BUILD_DEPRECATED
BUILD_STATIC
BUILD_MULTITHREADED
TARGET_UNIX
TARGET_APPLE
TARGET_IOS
TARGET_IOS_SIMULATOR
TARGET_WINDOWS
TARGET_WINDOWS_RT
TARGET_EMSCRIPTEN
TARGET_ANDROID
PLUGINMANAGER_NO_DYNAMIC_PLUGIN_SUPPORT
TESTSUITE_TARGET_XCTEST
UTILITY_USE_ANSI_COLORS)
foreach(_corradeFlag ${_corradeFlags})
string(FIND "${_corradeConfigure}" "#define CORRADE_${_corradeFlag}" _corrade_${_corradeFlag})
if(NOT _corrade_${_corradeFlag} EQUAL -1)
set(CORRADE_${_corradeFlag} 1)
endif()
endforeach()
# CMake module dir
find_path(_CORRADE_MODULE_DIR
NAMES UseCorrade.cmake CorradeLibSuffix.cmake
PATH_SUFFIXES share/cmake/Corrade)
mark_as_advanced(_CORRADE_MODULE_DIR)
set(CORRADE_USE_MODULE ${_CORRADE_MODULE_DIR}/UseCorrade.cmake)
set(CORRADE_LIB_SUFFIX_MODULE ${_CORRADE_MODULE_DIR}/CorradeLibSuffix.cmake)
# Ensure that all inter-component dependencies are specified as well
foreach(_component ${Corrade_FIND_COMPONENTS})
string(TOUPPER ${_component} _COMPONENT)
if(_component STREQUAL Containers)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Utility)
elseif(_component STREQUAL Interconnect)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Utility)
elseif(_component STREQUAL PluginManager)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Containers Utility rc)
elseif(_component STREQUAL TestSuite)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Utility Main) # see below
elseif(_component STREQUAL Utility)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Containers rc)
endif()
# Mark the dependencies as required if the component is also required
if(Corrade_FIND_REQUIRED_${_component})
foreach(_dependency ${_CORRADE_${_COMPONENT}_DEPENDENCIES})
set(Corrade_FIND_REQUIRED_${_dependency} TRUE)
endforeach()
endif()
list(APPEND _CORRADE_ADDITIONAL_COMPONENTS ${_CORRADE_${_COMPONENT}_DEPENDENCIES})
# Main is linked only in corrade_add_test(), not to everything that depends
# on TestSuite, so remove it from the list again once we filled the above
# variables
if(_component STREQUAL TestSuite)
set(_CORRADE_${_COMPONENT}_DEPENDENCIES Utility)
endif()
endforeach()
# Join the lists, remove duplicate components
if(_CORRADE_ADDITIONAL_COMPONENTS)
list(INSERT Corrade_FIND_COMPONENTS 0 ${_CORRADE_ADDITIONAL_COMPONENTS})
endif()
if(Corrade_FIND_COMPONENTS)
list(REMOVE_DUPLICATES Corrade_FIND_COMPONENTS)
endif()
# Component distinction
set(_CORRADE_LIBRARY_COMPONENTS "^(Containers|Interconnect|Main|PluginManager|TestSuite|Utility)$")
if(CORRADE_TARGET_WINDOWS)
# CorradeMain is a real library only on windows, a dummy target elsewhere
set(_CORRADE_HEADER_ONLY_COMPONENTS "^(Containers)$")
else()
set(_CORRADE_HEADER_ONLY_COMPONENTS "^(Containers|Main)$")
endif()
set(_CORRADE_EXECUTABLE_COMPONENTS "^(rc)$")
# Find all components
foreach(_component ${Corrade_FIND_COMPONENTS})
string(TOUPPER ${_component} _COMPONENT)
# Create imported target in case the library is found. If the project is
# added as subproject to CMake, the target already exists and all the
# required setup is already done from the build tree.
if(TARGET Corrade::${_component})
set(Corrade_${_component}_FOUND TRUE)
else()
# Library (and not header-only) components
if(_component MATCHES ${_CORRADE_LIBRARY_COMPONENTS} AND NOT _component MATCHES ${_CORRADE_HEADER_ONLY_COMPONENTS})
add_library(Corrade::${_component} UNKNOWN IMPORTED)
# Try to find both debug and release version
find_library(CORRADE_${_COMPONENT}_LIBRARY_DEBUG Corrade${_component}-d)
find_library(CORRADE_${_COMPONENT}_LIBRARY_RELEASE Corrade${_component})
mark_as_advanced(CORRADE_${_COMPONENT}_LIBRARY_DEBUG
CORRADE_${_COMPONENT}_LIBRARY_RELEASE)
if(CORRADE_${_COMPONENT}_LIBRARY_RELEASE)
set_property(TARGET Corrade::${_component} APPEND PROPERTY
IMPORTED_CONFIGURATIONS RELEASE)
set_property(TARGET Corrade::${_component} PROPERTY
IMPORTED_LOCATION_RELEASE ${CORRADE_${_COMPONENT}_LIBRARY_RELEASE})
endif()
if(CORRADE_${_COMPONENT}_LIBRARY_DEBUG)
set_property(TARGET Corrade::${_component} APPEND PROPERTY
IMPORTED_CONFIGURATIONS DEBUG)
set_property(TARGET Corrade::${_component} PROPERTY
IMPORTED_LOCATION_DEBUG ${CORRADE_${_COMPONENT}_LIBRARY_DEBUG})
endif()
endif()
# Header-only library components
if(_component MATCHES ${_CORRADE_HEADER_ONLY_COMPONENTS})
add_library(Corrade::${_component} INTERFACE IMPORTED)
endif()
# Default include path names to look for for library / header-only
# components
if(_component MATCHES ${_CORRADE_LIBRARY_COMPONENTS})
set(_CORRADE_${_COMPONENT}_INCLUDE_PATH_SUFFIX Corrade/${_component})
set(_CORRADE_${_COMPONENT}_INCLUDE_PATH_NAMES ${_component}.h)
endif()
# Executable components
if(_component MATCHES ${_CORRADE_EXECUTABLE_COMPONENTS})
add_executable(Corrade::${_component} IMPORTED)
find_program(CORRADE_${_COMPONENT}_EXECUTABLE corrade-${_component})
mark_as_advanced(CORRADE_${_COMPONENT}_EXECUTABLE)
if(CORRADE_${_COMPONENT}_EXECUTABLE)
set_property(TARGET Corrade::${_component} PROPERTY
IMPORTED_LOCATION ${CORRADE_${_COMPONENT}_EXECUTABLE})
endif()
endif()
# No special setup for Containers library
# Interconnect library
if(_component STREQUAL Interconnect)
# Disable /OPT:ICF on MSVC, which merges functions with identical
# contents and thus breaks signal comparison
if(CORRADE_TARGET_WINDOWS AND CMAKE_CXX_COMPILER_ID STREQUAL "MSVC")
if(CMAKE_VERSION VERSION_LESS 3.13)
set_property(TARGET Corrade::${_component} PROPERTY
INTERFACE_LINK_LIBRARIES "-OPT:NOICF,REF")
else()
set_property(TARGET Corrade::${_component} PROPERTY
INTERFACE_LINK_OPTIONS "/OPT:NOICF,REF")
endif()
endif()
# Main library
elseif(_component STREQUAL Main)
set(_CORRADE_${_COMPONENT}_INCLUDE_PATH_SUFFIX Corrade)
set(_CORRADE_${_COMPONENT}_INCLUDE_PATH_NAMES Corrade.h)
if(CORRADE_TARGET_WINDOWS)
if(NOT MINGW)
# Abusing INTERFACE_LINK_LIBRARIES because
# INTERFACE_LINK_OPTIONS is only since 3.13. They treat
# things with `-` in front as linker flags and fortunately
# I can use `-ENTRY` instead of `/ENTRY`.
# https://gitlab.kitware.com/cmake/cmake/issues/16543
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_LINK_LIBRARIES "-ENTRY:$<$<NOT:$<BOOL:$<TARGET_PROPERTY:WIN32_EXECUTABLE>>>:wmainCRTStartup>$<$<BOOL:$<TARGET_PROPERTY:WIN32_EXECUTABLE>>:wWinMainCRTStartup>")
else()
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_LINK_LIBRARIES "-municode")
endif()
endif()
# PluginManager library
elseif(_component STREQUAL PluginManager)
# At least static build needs this
if(CORRADE_TARGET_UNIX)
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_LINK_LIBRARIES ${CMAKE_DL_LIBS})
endif()
# TestSuite library has some additional files
elseif(_component STREQUAL TestSuite)
# XCTest runner file
if(CORRADE_TESTSUITE_TARGET_XCTEST)
find_file(CORRADE_TESTSUITE_XCTEST_RUNNER XCTestRunner.mm.in
PATH_SUFFIXES share/corrade/TestSuite)
set(CORRADE_TESTSUITE_XCTEST_RUNNER_NEEDED CORRADE_TESTSUITE_XCTEST_RUNNER)
# ADB runner file
elseif(CORRADE_TARGET_ANDROID)
find_file(CORRADE_TESTSUITE_ADB_RUNNER AdbRunner.sh
PATH_SUFFIXES share/corrade/TestSuite)
set(CORRADE_TESTSUITE_ADB_RUNNER_NEEDED CORRADE_TESTSUITE_ADB_RUNNER)
# Emscripten runner file
elseif(CORRADE_TARGET_EMSCRIPTEN)
find_file(CORRADE_TESTSUITE_EMSCRIPTEN_RUNNER EmscriptenRunner.html.in
PATH_SUFFIXES share/corrade/TestSuite)
set(CORRADE_TESTSUITE_EMSCRIPTEN_RUNNER_NEEDED CORRADE_TESTSUITE_EMSCRIPTEN_RUNNER)
endif()
# Utility library (contains all setup that is used by others)
elseif(_component STREQUAL Utility)
# Top-level include directory
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES ${CORRADE_INCLUDE_DIR})
# Require (at least) C++11 for users
set_property(TARGET Corrade::${_component} PROPERTY
INTERFACE_CORRADE_CXX_STANDARD 11)
set_property(TARGET Corrade::${_component} APPEND PROPERTY
COMPATIBLE_INTERFACE_NUMBER_MAX CORRADE_CXX_STANDARD)
# AndroidLogStreamBuffer class needs to be linked to log library
if(CORRADE_TARGET_ANDROID)
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_LINK_LIBRARIES "log")
endif()
endif()
# Find library includes
if(_component MATCHES ${_CORRADE_LIBRARY_COMPONENTS})
find_path(_CORRADE_${_COMPONENT}_INCLUDE_DIR
NAMES ${_CORRADE_${_COMPONENT}_INCLUDE_PATH_NAMES}
HINTS ${CORRADE_INCLUDE_DIR}/${_CORRADE_${_COMPONENT}_INCLUDE_PATH_SUFFIX})
mark_as_advanced(_CORRADE_${_COMPONENT}_INCLUDE_DIR)
endif()
# Add inter-library dependencies
if(_component MATCHES ${_CORRADE_LIBRARY_COMPONENTS} OR _component MATCHES ${_CORRADE_HEADER_ONLY_COMPONENTS})
foreach(_dependency ${_CORRADE_${_COMPONENT}_DEPENDENCIES})
if(_dependency MATCHES ${_CORRADE_LIBRARY_COMPONENTS} OR _dependency MATCHES ${_CORRADE_HEADER_ONLY_COMPONENTS})
set_property(TARGET Corrade::${_component} APPEND PROPERTY
INTERFACE_LINK_LIBRARIES Corrade::${_dependency})
endif()
endforeach()
endif()
# Decide if the component was found
if((_component MATCHES ${_CORRADE_LIBRARY_COMPONENTS} AND _CORRADE_${_COMPONENT}_INCLUDE_DIR AND (_component MATCHES ${_CORRADE_HEADER_ONLY_COMPONENTS} OR CORRADE_${_COMPONENT}_LIBRARY_RELEASE OR CORRADE_${_COMPONENT}_LIBRARY_DEBUG)) OR (_component MATCHES ${_CORRADE_EXECUTABLE_COMPONENTS} AND CORRADE_${_COMPONENT}_EXECUTABLE))
set(Corrade_${_component}_FOUND TRUE)
else()
set(Corrade_${_component}_FOUND FALSE)
endif()
endif()
endforeach()
include(FindPackageHandleStandardArgs)
find_package_handle_standard_args(Corrade REQUIRED_VARS
CORRADE_INCLUDE_DIR
_CORRADE_MODULE_DIR
_CORRADE_CONFIGURE_FILE
${CORRADE_TESTSUITE_XCTEST_RUNNER_NEEDED}
${CORRADE_TESTSUITE_ADB_RUNNER_NEEDED}
${CORRADE_TESTSUITE_EMSCRIPTEN_RUNNER_NEEDED}
HANDLE_COMPONENTS)
# Finalize the finding process
include(${CORRADE_USE_MODULE})
# Installation dirs
set(CORRADE_INCLUDE_INSTALL_PREFIX "."
CACHE STRING "Prefix where to put platform-independent include and other files")
set(CORRADE_INCLUDE_INSTALL_DIR ${CORRADE_INCLUDE_INSTALL_PREFIX}/include/Corrade)
You can’t perform that action at this time.