At this point, the v2.0 branch of this repository is primarily an administrative back-end for CSOL-site. In the future, we'll likely create a v3.0 branch that brings in the best of the v2.0 branch and the development branch (which was created for Thimble).
Here is an example configuration. This assumes you are running redis and mongo locally.
export NODE_ENV="development" export THEME_DIR="themes/csol" export OPENBADGER_AWS_FAKE_S3_DIR="s3-fake-storage" export OPENBADGER_HOST="localhost" export OPENBADGER_PROTOCOL="http" export OPENBADGER_PORT=3000 export OPENBADGER_PERSONA_AUDIENCE="http://localhost:3000" export OPENBADGER_LOGDIR='.' export OPENBADGER_SECRET="badgerbadgerbadgerbadger" export OPENBADGER_JWT_SECRET="badgerjwtsecret" export OPENBADGER_LIMITED_JWT_SECRET="ihavelimitedaccess" export OPENBADGER_REDIS_HOST="localhost" export OPENBADGER_REDIS_PORT=6379 export OPENBADGER_MONGO_HOST="localhost" export OPENBADGER_MONGO_PORT=27017 export OPENBADGER_MONGO_DB="openbadger" export OPENBADGER_CLAIM_URL_TEXT='csol.org/claim' export OPENBADGER_ADMINS='["*@mozilla(foundation)?.org"]' export OPENBADGER_NOTIFICATION_WEBHOOK="http://localhost:3000/notify/"
You can either paste that directly into your terminal, or you can put
that in a file and
source it. For example, if you save a version of
$ source config.env
Adding sample data
If you want to add some sample data so you don't need to create issuers, programs, and badges from scratch, you can use the following command:
Using the Persona simulator
When developing locally without internet access, or trying out logging in as multiple different email addresses, you may find it useful to enable simulation of the Persona service via stubbyid.js. When enabled, a dialog box asking for your email address, with no password prompt, is all that's required to log in as any user.
This feature can be used only when
NODE_ENV=development, and can be
enabled by setting the
OPENBADGER_ENABLE_STUBBYID environment variable to
any value (even the empty string).
Using real S3 instead of fake S3
For production builds, you'll want to modify the above sample configuration with the following:
unset OPENBADGER_AWS_FAKE_S3_DIR export OPENBADGER_AWS_KEY="aewgaewgaweg" export OPENBADGER_AWS_SECRET="zcvzncvzcbm" export OPENBADGER_AWS_BUCKET="bucket-o-s3"
Using memcached instead of redis for sessions
In some cases (such as deploying on AWS) it might be easier to use memcached rather than redis.
Note the use of
HOSTS in the plural – the memcached session store supports using multiple servers, so you can pass in an array of memcached instances if necessary.
bunyan to generate rich logs in JSON format. We output these logs to
stdout and do our best (through some monkey patching of the
console object) to output everything else to
stderr. So the only thing that should come through on
stdout is the stream of log events, unless some component directly writes to
process.stdout (which should be considered a bug).
make task (or
npm run-script start) starts the server pipes stdout through a formatter, so you should see human-readable logs in the console instead of a stream of JSON objects. You can do this manually by doing
node app.js | ./node_modules/.bin/bunyan.
Log aggregation with Graylog2
If you want to aggregate logs with Graylog2 there is a minor amount of additional setup:
export GRAYLOG_HOST="graylog.example.org" #defaults to localhost export GRAYLOG_PORT=12201 #defaults to 11201 export GRAYLOG_FACILITY="openbadger-whatevs" #defaults to openbadger
We've included a CLI tool,
bin/messina, which takes a stream of JSON on stdin, converts it to GELF and sends it off to the configured Graylog2 server. It also pipes stdin to stdout, so you can chain commands:
node app.js | bin/messina | bunyan. This is exactly what
npm run-script start-with-logs does.
Installing deps & starting the server
$ make # will do `npm install` and then start server
Running the test suite
The test suite assumes mongodb is running on localhost and using the openbadger_test db.
You can use the following commands to run the entire suite:
$ bin/test.js # normally you'd use this $ bin/test.js --debug # if you want to see debugging $ make lint # to lint the codebase
You can also run just a few of the tests:
$ bin/test.js tests/api.test.js # run only one test file $ bin/test.js -f bad # run all test files w/ 'bad' in their name
This is useful for when one file (or area of code) is giving you trouble and you don't want to run through the whole suite to debug just that one thing.
$ vmc login $ vmc push clopenbadger --runtime node08 --mem 128M --no-start Would you like to deploy from the current directory? [Yn]: Application Deployed URL [clopenbadger.vcap.mozillalabs.com]: Detected a Node.js Application, is this correct? [Yn]: Creating Application: OK Would you like to bind any services to 'clopenbadger'? [yN]: Uploading Application: Checking for available resources: OK Processing resources: OK Packing application: OK Uploading (93K): OK Push Status: OK $ vmc create-service redis redis-clopenbadger Creating Service: OK $ vmc create-service mongodb mongodb-clopenbadger Creating Service: OK $ vmc bind-service redis-clopenbadger clopenbadger Binding Service [redis-clopenbadger]: OK $ vmc bind-service mongodb-clopenbadger clopenbadger Binding Service [mongodb-clopenbadger]: OK $ vmc env-add clopenbadger OPENBADGER_PROTOCOL=https Adding Environment Variable [OPENBADGER_PROTOCOL=https]: OK $ vmc env-add clopenbadger OPENBADGER_SECRET="badgerbadgerbadgerbadger" Adding Environment Variable [OPENBADGER_SECRET=badgerbadgerbadgerbadger]: OK $ vmc env-add clopenbadger OPENBADGER_ADMINS='[\"firstname.lastname@example.org\", \"*@mozillafoundation.org\"]' Adding Environment Variable [OPENBADGER_ADMINS=[\"email@example.com\", \"*@mozillafoundation.org\"]]: OK $ vmc env-add clopenbadger OPENBADGER_PERSONA_AUDIENCE=https://clopenbadger.vcap.mozillalabs.com Adding Environment Variable [OPENBADGER_PERSONA_AUDIENCE=https://clopenbadger.vcap.mozillalabs.com]: OK $ vmc env-add clopenbadger OPENBADGER_NOTIFICATION_WEBHOOK=http://localhost:3000/notify/claim Adding Environment Variable [OPENBADGER_NOTIFICATION_WEBHOOK=http://localhost:3000/notify/claim]: OK And finally: $ vmc restart clopenbadger Staging Application: OK Starting Application: OK
You should only have to do the following once:
$ heroku login Enter your Heroku credentials. Email: firstname.lastname@example.org Password: Could not find an existing public key. Would you like to generate one? [Yn] Generating new SSH public key. Uploading ssh public key /Users/brian/.ssh/id_rsa.pub $ heroku create Creating evening-fjord-7837... done, stack is cedar http://evening-fjord-7837.herokuapp.com/ | email@example.com:evening-fjord-7837.git Git remote heroku added $ git push heroku HEAD:master Counting objects: 23, done. Delta compression using up to 4 threads. Compressing objects: 100% (13/13), done. Writing objects: 100% (13/13), 1.26 KiB, done. Total 13 (delta 9), reused 0 (delta 0) -----> Heroku receiving push -----> Node.js app detected -----> Resolving engine versions Using Node.js version: 0.8.11 Using npm version: 1.1.49 -----> Fetching Node.js binaries -----> Vendoring node into slug -----> Installing dependencies with npm npm http GET https://registry.npmjs.org/express/3.0.0rc5 npm http GET https://registry.npmjs.org/nunjucks ... ... Dependencies installed -----> Building runtime environment -----> Discovering process types Procfile declares types -> web -----> Compiled slug size: 11.2MB -----> Launching... done, v21 http://evening-fjord-7837.herokuapp.com deployed to Heroku To firstname.lastname@example.org:evening-fjord-7837.git bcd2285..cce42fa master -> master $ heroku ps:scale web=1 Scaling web processes... done, now running 1
Now, you must set the heroku environment configs. It's very similar to
setting local env configs, only you use
heroku config:add instead of
heroku config:add OPENBADGER_HOST="evening-fjord-7837.herokuapp.com" heroku config:add OPENBADGER_PROTOCOL="http" heroku config:add OPENBADGER_PORT=80 heroku config:add OPENBADGER_LOGDIR='.' heroku config:add OPENBADGER_PERSONA_AUDIENCE="http://evening-fjord-7837.herokuapp.com" heroku config:add OPENBADGER_SECRET="19ofOKiFSr8aCyRpH2ohmfh5O7dOpReCHa9vkeoWJCWP72oVb" heroku config:add OPENBADGER_REDIS_HOST="your-redis-host.org" heroku config:add OPENBADGER_REDIS_PORT=6379 heroku config:add OPENBADGER_MONGO_HOST="your-mongo-host.org" heroku config:add OPENBADGER_MONGO_PORT=27017 heroku config:add OPENBADGER_MONGO_DB="openbadger" heroku config:add OPENBADGER_ADMINS='["*@mozilla(foundation)?.org"]' heroku config:add OPENBADGER_NOTIFICATION_WEBHOOK="http://localhost:3000/notify/"
Deploying to Heroku
$ make heroku # deploy if out of date & opens in your browser