Permalink
Commits on Sep 25, 2016
  1. ARM: PXA27x: Zipit Z2: disable wake on GPIO0

    mozzwald committed Sep 25, 2016
    We don't want machine to wake up on AC state change
    
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
  2. ARM: PXA27x: save/restore PWER on suspend/resume

    mozzwald committed Sep 25, 2016
    Bootloader can clobber PWER value, so save it state on suspend.
    
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Sep 14, 2016
  1. ARM: Z2: Add dock microphone support to zipit z2 DT

    mozzwald committed Sep 14, 2016
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
  2. snd-wm8750: zipit z2 ADC clock workaround for dock microphone input

    mozzwald committed Sep 14, 2016
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Aug 10, 2016
  1. Z2: add misc dock gpios

    mozzwald committed Aug 10, 2016
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Aug 4, 2016
  1. pxa27x_udc: change skip_portmode_init to host_portmode_init and force…

    mozzwald committed Aug 4, 2016
    … host mode if set
    
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Jul 14, 2016
  1. power_supply: use oneshot inverted for charging_blink_full_solid (full)

    mozzwald committed Jul 14, 2016
    Use oneshot inverted blink so charging_blink_full_solid works as intended on FULL status. Using led_trigger_event(psy->charging_blink_full_solid_trig, LED_FULL) actually turns off the LED, possibly a bug in core led code?
    
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Jun 7, 2016
  1. ARM: Z2: update DT to enable inverted/active high gpio card detection

    mozzwald committed Jun 7, 2016
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
  2. pxamci: add dt support for gpio active high card detection

    mozzwald committed Jun 7, 2016
    adding the property "cd-invert" to device tree source file will enable gpio active high card detection
    
    Signed-off-by: Joe Honold <mozzwald@gmail.com>
Commits on Feb 22, 2016
  1. pxa27x_udc: add a module parameter to skip port mode init

    anarsoul committed Feb 22, 2016
    By default pxa27x_udc sets PORT 2 mode to device. But it's not a good
    idea when using USB flash as a boot device.
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  2. pxamci: add module paratemers to ignore CRC errors and enforce 1bit x…

    anarsoul committed Feb 22, 2016
    …fers
    
    pxamci driver tend to report bogus CRC errors on data xfers, it's possible
    to workaround it by forcing 1-bit mode, but it reduces bus bandwidth.
    Another option is to ignore CRC errors, but it's not safe. It's up to user
    to decide what way he prefers.
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Commits on Feb 21, 2016
  1. z2-battery: get charging status from bq24035 via gpio

    mozzwald authored and anarsoul committed Feb 21, 2016
    Signed-off-by: Joseph Honold <mozzwald@gmail.com>
  2. z2-battery: get charging status from bq24035 via gpio

    mozzwald committed Feb 21, 2016
    Signed-off-by: Joseph Honold <mozzwald@gmail.com>
Commits on Feb 17, 2016
  1. ohci-pxa27x: disable IRQ on suspend, enable on resume

    anarsoul committed Feb 17, 2016
    Otherwise driver gets a spurious interrupt on resume and
    disables the IRQ
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  2. pxa27xx_keypad: fix resume on pxa27x devices

    anarsoul committed Feb 17, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  3. asoc: simple-card: add 'Speaker' pin to HP jack

    anarsoul committed Feb 17, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  4. pxa2xx-pcm-lib: increase min period size to 1024 bytes

    anarsoul committed Feb 16, 2016
    32 is too small value, it causes high interrupt rate and
    audio stuttering
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  5. dmaengine: pxa_dma: fix cyclic transfers

    rjarzmik authored and anarsoul committed Feb 16, 2016
    While testing audio with pxa2xx-ac97, underrun were happening while the
    user application was correctly feeding the music. Debug proved that the
    cyclic transfer is not cyclic, ie. the last descriptor did not loop on
    the first.
    
    This was tested on a pxa27x platform.
    
    Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
  6. pxa2xx-i2s: fix filter_fn argument

    anarsoul committed Feb 15, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  7. gpio-pxa: use indexed IRQs for DT initalization

    anarsoul committed Feb 15, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  8. pxa-ssp: set bus ID for mixed DT/legacy initalization

    anarsoul committed Feb 15, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  9. pxamci: set default ocr_mask if none is supplied

    anarsoul committed Feb 15, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  10. z2-battery: add DT initialization support

    anarsoul committed Feb 15, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  11. spi-pxa2xx: don't init early, otherwise it inits before DMA driver

    anarsoul committed Feb 17, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  12. pxa27x_udc: add ability to work without D+ gpio and usb_mode switch

    anarsoul committed Feb 17, 2016
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  13. pxa27x_udc: eliminate alignment issue

    anarsoul committed Oct 25, 2014
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  14. lms283gf05: add suspend/resume handlers

    anarsoul committed Jun 3, 2012
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  15. libertas: implement if_spi runtime power management

    anarsoul committed Aug 2, 2011
    The SPI card is now fully powered down when the network
    interface is brought down.
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  16. libertas: add ability to power off card on suspend

    anarsoul committed Aug 2, 2011
    Could be usefull if it's not possible to keep power on the card
    when host goes into suspend.
    
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
  17. libertas_spi: cancel packer work on module removal

    anarsoul committed Mar 7, 2011
    Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Commits on Jan 10, 2016
  1. Linux 4.4

    torvalds committed Jan 10, 2016
Commits on Jan 9, 2016
  1. Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/g…

    torvalds committed Jan 9, 2016
    …it/jejb/scsi
    
    Pull SCSI fix from James Bottomley:
     "A single fix for machines with pages > 4k (PPC mostly).
    
      There's a bug in our optimal transfer size code where we don't account
      for pages > 4k and can set the transfer size to be less than the page
      size causing nasty failures"
    
    * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
      sd: Reject optimal transfer length smaller than page size