Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tree: 0f3138124e
Fetching contributors…

Cannot retrieve contributors at this time

74 lines (57 sloc) 2.527 kb
/* sd2snes - SD card based universal cartridge for the SNES
Copyright (C) 2009-2010 Maximilian Rehkopf <otakon@gmx.net>
This file was adapted from sd2iec, written by Ingo Korb.
Original copyright header follows:
*/
/* sd2iec - SD/MMC to Commodore serial bus interface/controller
Copyright (C) 2007-2009 Ingo Korb <ingo@akana.de>
Inspiration and low-level SD/MMC access based on code from MMC2IEC
by Lars Pontoppidan et al., see sdcard.c|h and config.h.
FAT filesystem access based on code from ChaN and Jim Brain, see ff.c|h.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License only.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
spi.h: Definitions for the low-level SPI routines
Based on original code by Lars Pontoppidan et al., see spi.c
for full copyright details.
*/
#ifndef SPI_H
#define SPI_H
// function prototypes
// SPI interface initializer
void spiInit(void);
// spiTransferByte(u08 data) waits until the SPI interface is ready
// and then sends a single byte over the SPI port. The function also
// returns the byte that was received during transmission.
uint8_t spiTransferByte(uint8_t data);
// spiTransferLong(u08 data) waits until the SPI interface is ready
// and then sends the long with MSB first over the SPI port.
uint32_t spiTransferLong(uint32_t data);
// Macros for setting slave select:
#ifdef CONFIG_TWINSD
# define SPI_SS_HIGH(card) do { \
if (card == 0) { \
SPI_PORT |= SPI_SS; \
} else { \
SD2_PORT |= SD2_CS; \
} \
} while (0)
#define SPI_SS_LOW(card) do { \
if (card == 0) { \
SPI_PORT &= (uint8_t)~SPI_SS; \
} else { \
SD2_PORT &= (uint8_t)~SD2_CS; \
} \
} while (0)
#else
# define SPI_SS_HIGH(card) SPI_PORT |= SPI_SS
# define SPI_SS_LOW(card) SPI_PORT &= (uint8_t)~SPI_SS
#endif
#endif
Jump to Line
Something went wrong with that request. Please try again.