-
Notifications
You must be signed in to change notification settings - Fork 35
new home for s3sync command line tools
ms4720/s3sync
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Welcome to s3sync.rb -------------------- Home page, wiki, forum, bug reports, etc: http://s3sync.net This is a ruby program that easily transfers directories between a local directory and an S3 bucket:prefix. It behaves somewhat, but not precisely, like the rsync program. In particular, it shares rsync's peculiar behavior that trailing slashes on the source side are meaningful. See examples below. One benefit over some other comparable tools is that s3sync goes out of its way to mirror the directory structure on S3. Meaning you don't *need* to use s3sync later in order to view your files on S3. You can just as easily use an S3 shell, a web browser (if you used the --public-read option), etc. Note that s3sync is NOT necessarily going to be able to read files you uploaded via some other tool. This includes things uploaded with the old perl version! For best results, start fresh! s3sync runs happily on linux, probably other *ix, and also Windows (except that symlinks and permissions management features don't do anything on Windows). If you get it running somewhere interesting let me know (see below) s3sync is free, and license terms are included in all the source files. If you decide to make it better, or find bugs, please let me know. The original inspiration for this tool is the perl script by the same name which was made by Thorsten von Eicken (and later updated by me). This ruby program does not share any components or logic from that utility; the only relation is that it performs a similar task. Examples: --------- (using S3 bucket 'mybucket' and prefix 'pre') Put the local etc directory itself into S3 s3sync.rb -r /etc mybucket:pre (This will yield S3 keys named pre/etc/...) Put the contents of the local /etc dir into S3, rename dir: s3sync.rb -r /etc/ mybucket:pre/etcbackup (This will yield S3 keys named pre/etcbackup/...) Put contents of S3 "directory" etc into local dir s3sync.rb -r mybucket:pre/etc/ /root/etcrestore (This will yield local files at /root/etcrestore/...) Put the contents of S3 "directory" etc into a local dir named etc s3sync.rb -r mybucket:pre/etc /root (This will yield local files at /root/etc/...) Put S3 nodes under the key pre/etc/ to the local dir etcrestore **and create local dirs even if S3 side lacks dir nodes** s3sync.rb -r --make-dirs mybucket:pre/etc/ /root/etcrestore (This will yield local files at /root/etcrestore/...) Prerequisites: -------------- You need a functioning Ruby (>=1.8.4) installation, as well as the OpenSSL ruby library (which may or may not come with your ruby). How you get these items working on your system is really not any of my business, but you might find the following things helpful. If you're using Windows, the ruby site has a useful "one click installer" (although it takes more clicks than that, really). On debian (and ubuntu, and other debian-like things), there are apt packages available for ruby and the open ssl lib. Your environment: ----------------- s3sync needs to know several interesting values to work right. It looks for them in the following environment variables -or- a s3config.yml file. In the yml case, the names need to be lowercase (see example file). Furthermore, the yml is searched for in the following locations, in order: $S3CONF/s3config.yml $HOME/.s3conf/s3config.yml /etc/s3conf/s3config.yml Required: AWS_ACCESS_KEY_ID AWS_SECRET_ACCESS_KEY If you don't know what these are, then s3sync is probably not the right tool for you to be starting out with. Optional: AWS_S3_HOST - I don't see why the default would ever be wrong HTTP_PROXY_HOST,HTTP_PROXY_PORT,HTTP_PROXY_USER,HTTP_PROXY_PASSWORD - proxy SSL_CERT_DIR - Where your Cert Authority keys live; for verification SSL_CERT_FILE - If you have just one PEM file for CA verification S3SYNC_RETRIES - How many HTTP errors to tolerate before exiting S3SYNC_WAITONERROR - How many seconds to wait after an http error S3SYNC_MIME_TYPES_FILE - Where is your mime.types file S3SYNC_NATIVE_CHARSET - For example Windows-1252. Defaults to ISO-8859-1. AWS_CALLING_FORMAT - Defaults to REGULAR REGULAR # http://s3.amazonaws.com/bucket/key SUBDOMAIN # http://bucket.s3.amazonaws.com/key VANITY # http://<vanity_domain>/key Important: For EU-located buckets you should set the calling format to SUBDOMAIN Important: For US buckets with CAPS or other weird traits set the calling format to REGULAR I use "envdir" from the daemontools package to set up my env variables easily: http://cr.yp.to/daemontools/envdir.html For example: envdir /root/s3sync/env /root/s3sync/s3sync.rb -etc etc etc I know there are other similar tools out there as well. You can also just call it in a shell script where you have exported the vars first such as: #!/bin/bash export AWS_ACCESS_KEY_ID=valueGoesHere ... s3sync.rb -etc etc etc But by far the easiest (and newest) way to set this up is to put the name:value pairs in a file named s3config.yml and let the yaml parser pick them up. There is an .example file shipped with the tar.gz to show what a yaml file looks like. Thanks to Alastair Brunton for this addition. You can also use some combination of .yaml and environment variables, if you want. Go nuts. Management tasks ---------------- For low-level S3 operations not encapsulated by the sync paradigm, try the companion utility s3cmd.rb. See README_s3cmd.txt. About single files ------------------ s3sync lacks the special case code that would be needed in order to handle a source/dest that's a single file. This isn't one of the supported use cases so don't expect it to work. You can use the companion utility s3cmd.rb for single get/puts. About Directories, the bane of any S3 sync-er --------------------------------------------- In S3 there's no actual concept of folders, just keys and nodes. So, every tool uses its own proprietary way of storing dir info (my scheme being the best naturally) and in general the methods are not compatible. If you populate S3 by some means *other than* s3sync and then try to use s3sync to "get" the S3 stuff to a local filesystem, you will want to use the --make-dirs option. This causes the local dirs to be created even if there is no s3sync-compatible directory node info stored on the S3 side. In other words, local folders are conjured into existence whenever they are needed to make the "get" succeed. About MD5 hashes ---------------- s3sync's normal operation is to compare the file size and MD5 hash of each item to decide whether it needs syncing. On the S3 side, these hashes are stored and returned to us as the "ETag" of each item when the bucket is listed, so it's very easy. On the local side, the MD5 must be calculated by pushing every byte in the file through the MD5 algorithm. This is CPU and IO intensive! Thus you can specify the option --no-md5. This will compare the upload time on S3 to the "last modified" time on the local item, and not do md5 calculations locally at all. This might cause more transfers than are absolutely necessary. For example if the file is "touched" to a newer modified date, but its contents didn't change. Conversely if a file's contents are modified but the date is not updated, then the sync will pass over it. Lastly, if your clock is very different from the one on the S3 servers, then you may see unanticipated behavior. A word on SSL_CERT_DIR: ----------------------- On my debian install I didn't find any root authority public keys. I installed some by running this shell archive: http://mirbsd.mirsolutions.de/cvs.cgi/src/etc/ssl.certs.shar (You have to click download, and then run it wherever you want the certs to be placed). I do not in any way assert that these certificates are good, comprehensive, moral, noble, or otherwise correct. But I am using them. If you don't set up a cert dir, and try to use ssl, then you'll 1) get an ugly warning message slapped down by ruby, and 2) not have any protection AT ALL from malicious servers posing as s3.amazonaws.com. Seriously... you want to get this right if you're going to have any sensitive data being tossed around. -- There is a debian package ca-certificates; this is what I'm using now. apt-get install ca-certificates and then use: SSL_CERT_DIR=/etc/ssl/certs You used to be able to use just one certificate, but recently AWS has started using more than one CA. Getting started: ---------------- Invoke by typing s3sync.rb and you should get a nice usage screen. Options can be specified in short or long form (except --delete, which has no short form) ALWAYS TEST NEW COMMANDS using --dryrun(-n) if you want to see what will be affected before actually doing it. ESPECIALLY if you use --delete. Otherwise, do not be surprised if you misplace a '/' or two and end up deleting all your precious, precious files. If you use the --public-read(-p) option, items sent to S3 will be ACL'd so that anonymous web users can download them, given the correct URL. This could be useful if you intend to publish directories of information for others to see. For example, I use s3sync to publish itself to its home on S3 via the following command: s3sync.rb -v -p publish/ ServEdge_pub:s3sync Where the files live in a local folder called "publish" and I wish them to be copied to the URL: http://s3.amazonaws.com/ServEdge_pub/s3sync/... If you use --ssl(-s) then your connections with S3 will be encrypted. Otherwise your data will be sent in clear form, i.e. easy to intercept by malicious parties. If you want to prune items from the destination side which are not found on the source side, you can use --delete. Always test this with -n first to make sure the command line you specify is not going to do something terrible to your cherished and irreplaceable data. Updates and other discussion: ----------------------------- The latest version of s3sync should normally be at: http://s3.amazonaws.com/ServEdge_pub/s3sync/s3sync.tar.gz and the Amazon S3 forums probably have a few threads going on it at any given time. I may not always see things posted to the threads, so if you want you can contact me at gbs-s3@10forward.com too. Change Log: ----------- 2006-09-29: Added support for --expires and --cache-control. Eg: --expires="Thu, 01 Dec 2007 16:00:00 GMT" --cache-control="no-cache" Thanks to Charles for pointing out the need for this, and supplying a patch proving that it would be trivial to add =) Apologies for not including the short form (-e) for the expires. I have a rule that options taking arguments should use the long form. ---------- 2006-10-04 Several minor debugs and edge cases. Fixed a bug where retries didn't rewind the stream to start over. ---------- 2006-10-12 Version 1.0.5 Finally figured out and fixed bug of trying to follow local symlink-to-directory. Fixed a really nasty sorting discrepancy that caused problems when files started with the same name as a directory. Retry on connection-reset on the S3 side. Skip files that we can't read instead of dying. ---------- 2006-10-12 Version 1.0.6 Some GC voodoo to try and keep a handle on the memory footprint a little better. There is still room for improvement here. ---------- 2006-10-13 Version 1.0.7 Fixed symlink dirs being stored to S3 as real dirs (and failing with 400) Added a retry catch for connection timeout error. (Hopefully) caught a bug that expected every S3 listing to contain results ---------- 2006-10-14 Version 1.0.8 Was testing for file? before symlink? in localnode.stream. This meant that for symlink files it was trying to shove the real file contents into the symlink body on s3. ---------- 2006-10-14 Version 1.0.9 Woops, I was using "max-entries" for some reason but the proper header is "max-keys". Not a big deal. Broke out the S3try stuff into a separate file so I could re-use it for s3cmd.rb ---------- 2006-10-16 Added a couple debug lines; not even enough to call it a version revision. ---------- 2006-10-25 Version 1.0.10 UTF-8 fixes. Catching a couple more retry-able errors in s3try (instead of aborting the program). ---------- 2006-10-26 Version 1.0.11 Revamped some details of the generators and comparator so that directories are handled in a more exact and uniform fashion across local and S3. ---------- 2006-11-28 Version 1.0.12 Added a couple more error catches to s3try. ---------- 2007-01-08 Version 1.0.13 Numerous small changes to slash and path handling, in order to catch several cases where "root" directory nodes were not being created on S3. This makes restores work a lot more intuitively in many cases. ---------- 2007-01-25 Version 1.0.14 Peter Fales' marker fix. Also, markers should be decoded into native charset (because that's what s3 expects to see). ---------- 2007-02-19 Version 1.1.0 *WARNING* Lots of path-handling changes. *PLEASE* test safely before you just swap this in for your working 1.0.x version. - Adding --exclude (and there was much rejoicing). - Found Yet Another Leading Slash Bug with respect to local nodes. It was always "recursing" into the first folder even if there was no trailing slash and -r wasn't specified. What it should have done in this case is simply create a node for the directory itself, then stop (not check the dir's contents). - Local node canonicalization was (potentially) stripping the trailing slash, which we need in order to make some decisios in the local generator. - Fixed problem where it would prepend a "/" to s3 key names even with blank prefix. - Fixed S3->local when there's no "/" in the source so it doesn't try to create a folder with the bucket name. - Updated s3try and s3_s3sync_mod to allow SSL_CERT_FILE ---------- 2007-02-22 Version 1.1.1 Fixed dumb regression bug caused by the S3->local bucket name fix in 1.1.0 ---------- 2007-02-25 Version 1.1.2 Added --progress ---------- 2007-06-02 Version 1.1.3 IMPORTANT! Pursuant to http://s3sync.net/forum/index.php?topic=49.0 , the tar.gz now expands into its own sub-directory named "s3sync" instead of dumping all the files into the current directory. In the case of commands of the form: s3sync -r somedir somebucket: The root directory node in s3 was being stored as "somedir/" instead of "somedir" which caused restores to mess up when you say: s3sync -r somebucket: restoredir The fix to this, by coincidence, actually makes s3fox work even *less* well with s3sync. I really need to build my own xul+javascript s3 GUI some day. Also fixed some of the NoMethodError stuff for when --progress is used and caught Errno::ETIMEDOUT ---------- 2007-07-12 Version 1.1.4 Added Alastair Brunton's yaml config code. ---------- 2007-11-17 Version 1.2.1 Compatibility for S3 API revisions. When retries are exhausted, emit an error. Don't ever try to delete the 'root' local dir. ---------- 2007-11-20 Version 1.2.2 Handle EU bucket 307 redirects (in s3try.rb) --make-dirs added ---------- 2007-11-20 Version 1.2.3 Fix SSL verification settings that broke in new S3 API. ---------- 2008-01-06 Version 1.2.4 Run from any dir (search "here" for includes). Search out s3config.yml in some likely places. Reset connection (properly) on retry-able non-50x errors. Fix calling format bug preventing it from working from yml. Added http proxy support. ---------- 2008-05-11 Version 1.2.5 Added option --no-md5 ---------- 2008-06-16 Version 1.2.6 Catch connect errors and retry. ---------- FNORD
About
new home for s3sync command line tools
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published