Fetching contributors…
Cannot retrieve contributors at this time
1842 lines (1457 sloc) 80.6 KB

Yeti language reference manual

Author: Madis Janson

About this document

This reference manual tries to describe the full Yeti language grammar and semantics as exactly as possible. It is written in terse form and with expectation, that the reader has already learned the Yeti language basics (for example by reading the short introduction). It should be useful for learning the exact syntax and semantics of some language construct, for learning advanced language parts not described in the introduction, and for people wanting to modify the compiler (or to write their own Yeti language compatible parser or compiler).


The Yeti grammar represented here is written as a parsing expression grammar.

The choice of PEG representation may seem odd, but the nature of Yeti syntax meant that it was easiest to use PEG for writing a full grammar that can be compiled into actual parser without any hacks (might be because the Yeti compiler uses a hand-written recursive-descent parser, which has quite similar logic to PEG grammars).

The grammar can be extracted from this manual and compiled into runnable parser by invoking following ant target in the Yeti source tree root:

ant grammar

Mouse parser generator is used and the resulting yeti-peg.jar can be invoked using java -jar at command line. The PEG grammar given here therefore follows the exact syntax used by the Mouse parser generator.

The Yeti source code is always read assuming UTF-8 encoding, regardless of the locale settings.

Source      = SP TopLevel !_;


Reserved words

KeywordOp   = "and" / "b\_and" / "b\_or" / "div" / "in" / "not" / "or" /
              "shl" / "shr" / "xor";
Keyword     = "instanceof" / KeywordOp / "as" / "case" / "catch" / "class" /
              "classOf" / "done" / "do" / "elif" / "else" / "esac" /
              "fall" / "finally" / "fi" / "if" / "import" / "is" / "load" /
              "loop" / "new" / "norec" / "of" / "then" / "try" /
              "typedef" / "unsafely\_as" / "var" / "with" / "yrt";
End         = "end" !IdChar;

The keywords cannot be used as identifiers, with the exception of the "end" keyword. The "end" can be used as an identifier inside blocks that doesn't use "end" as terminator (currently only block terminated using "end" is class definition).


The Mouse PEG grammar uses underscore to mean any character, and literal underscores must be escaped with backslash. For example the above "unsafely\_as" means literal keyword unsafely_as.

Comments and whitespace

LineComment = "//" ^[\r\n]*;
CommentBody = ("/*" CommentBody / !"*/" _)* "*/";
Space       = [ \t\r\n\u00A0] / LineComment / "/*" CommentBody;
SP          = Space*;
SkipSP      = (Space+ !("\." / "["))?;

Whitespace can appear between most other tokens without changing the meaning of code, although some operators are whitespace sensitive (for example field reference operator is distinguished from function composition by not having whitespace on both sides).

Multi-line comments can be nested, and all comments are considered to be equivalent to other whitespace.


Colon       = SP ":" !OpChar;
Semicolon   = SP ";";
Dot         = "\." / SP "\." ![ (),;\\{}];

The separator symbols have a different meaning depending on the context.


Hex         = [0-9] / [a-f] / [A-F];
Number      = ("0" ([xX] Hex+ / [oO] [0-7]+) /
              [0-9]+ ("\." [0-9]+)? ([eE] ([+-]? [0-9]+)?)?);

Numbers represent numeric literals in expressions, and have always the number type (rational and integer values are not distinguished by type). Integer literals can be written as hexadecimal or octal numbers, by using the 0x or 0o prefix respectively.

Floating-point runtime representation can be enforced by using exponent (scientific) notation. As a special case of it, a single letter e may be added to the end (the exponent is considered to be zero in this case).

Simple string

SimpleString = ("'" ^[']* "'")+;

Simple string literals have string type in expressions. Single apostrophe character (') can be escaped by writing it twice, but other escaping mechanisms are not available in simple string literals. This makes it suitable for writing strings that contain many backslash symbols (for example Perl compatible regular expressions).


IdChar      = [a-z] / [A-Z] / [0-9] / "\_" / "'" / "?" / "$";
OpChar      = [!#%&*+-.:<=>@^|~] / "/" ![*/];
Sym         = !(Keyword !IdChar) ([a-z] / "\_") IdChar*;
IdOp        = "`" Sym "`";
AnyOp       = !([=:] !OpChar) OpChar+ / IdOp / KeywordOp !IdChar;
Id          = Sym / "(" SP AnyOp SP ")";
JavaId      = SP ([a-z] / [A-Z] / "\_") ([a-z] / [A-Z] / [0-9] / "\_" / "$")*;
ClassName   = JavaId (Dot JavaId)*;
ClassId     = SP "~"? ClassName;
Variant     = [A-Z] IdChar*;

Identifiers are used for naming definitions/bindings and their references, the exact syntax and meaning depends on the context (most common are the value bindings used within expressions).

Most operators can be used as normal identifiers by placing them in parenthesis. The type of usable operator binding should be a function (for binary operators it would be left-sideright-sideresult).

Type description

Type        = SP BareType SkipSP FuncType*;
IsType      = SP ("is" !IdChar Type)?;
BareType    = ['^] IdChar+ / "~" JavaType / "{" StructType / "(" SP ")" /
              "(" Type ")" / VariantType ("|" !OpChar SP VariantType)* /
              Sym "!"? SkipSP TypeParam?;
TypeParam   = "<" SP (Type ("," Type)*)? ">";
FuncType    = ("->" / "\u2192") !OpChar SP BareType SkipSP;
JavaType    = ClassName "[]"*;

Type description is one of the following: function, type parameter (starts with ' or ^), Java class name (prefixed with ~), structure, variant or type name. Type name may be followed by optional parameter list that is embedded between < and >. Java class name may be followed by one or more [] pairs, indicating that it is JVM array type (in this case the ClassName might be also Java primitive type name like char).

Type parameters starting with ^ are considered to have an ordered type.

Function type is in the form argument-typereturn-type (the above grammar defines it like type list separated by arrows, because the return-type itself can be a function type without any surrounding parenthesis). Either -> or the unicode symbol \u2192 (→) can be used for the function arrow.

The IsType clause using "is" keyword is used after binding or expression to narrow it's type by unifying it with the given type.

Structure type

StructType  = FieldType ("}" / "," SP "}" / "," StructType);
FieldType   = SP ("var" !IdChar SP)? "\."? Sym SP "is" !IdChar Type;

Structure type is denoted by field list surrounded by { and }. The field names can be prefixed with dot, denoting required fields (if any of the fields is without dot, then all listed fields form the allowed fields set in the structure type).

Structure type in Yeti is more commonly called an extensible record type in the ML family languages (the name structure is chosen in Yeti because it is more familiar to programmers knowing the C family languages).

Variant type

VariantType = Variant "\."? !IdChar SP BareType SkipSP;

Single variant type consists of the capitalized variant tag followed by variants value type. The variant tag can be suffixed with dot, denoting that it isn't a required variant.

The full variant type consists of single variants separated by | symbols. If any of the tags in full variant type has the dot prefix, then all listed fields form the allowed variants set).

Composite literal constructors

Composite literals are literal expressions that can contain other expressions. These expressions generally construct a new instance of the value on each evaluation, with the exception of constant list literals, and string literals that doesn't have any embedded expressions.


String      = SimpleString /
              "\"\"\"" ("\\" StringEscape / !"\"\"\"" _)* "\"\"\"" /
              "\"" ("\\" StringEscape / ^["])* "\"";
StringEscape = ["\\abfnrte0] / "u" Hex Hex Hex Hex /
               "(" SP InParenthesis SP ")" / [ \t\r\n] SP "\"";

String literals have string type in expressions. Strings can contain following escape sequences:

Escape sequence Meaning in the string
\" Quotation mark " (ASCII code 34)
\\ Backslash \ (ASCII code 92)
\(expression) Embedded expression. The value of the expression is converted into string in the same way as standard libraries string function would do.
\whitespace" This escape is simply omitted. The whitespace can contain line breaks and comments, so this is useful for breaking long strings into multiple lines.
\0 NUL (ASCII code 0, null character)
\a BEL (ASCII code 7, bell)
\b BS (ASCII code 8, backspace)
\t HT (ASCII code 9, horizontal tab)
\n LF (ASCII code 10, new line)
\f FF (ASCII code 12, form feed)
\r CR (ASCII code 13, carriage return)
\e ESC (ASCII code 27, escape)
\u#### UTF-16 code point with the given hexadecimal code ####.

Stray backslash characters are not allowed, and all other sequences of symbols represent themselves inside the string literal.

Strings are composite literals, because it is possible to embed arbitrary expressions in the string using \(...). The value of the whole string literal is the result of concatenation of literal and embedded expression value parts as strings.

Strings can be triple-quoted (in the start and end), the meaning is exactly same as with strings between single " symbols. Triple-quoted strings can be useful for larger string literals that contain " symbols by themselves.

Lambda expression

Lambda      = "do" !IdChar BindArg* Colon AnyExpression "done" !IdChar;
BindField   = FieldId IsType "=" !OpChar SP Id SP / Id IsType;
StructArg   = "{" SP BindField ("," SP BindField)* "}";
BindArg     = SP (Id / "()" / StructArg);

Lambda expression (aka function literal) constructs a function value containing the given block of code (AnyExpression) as body. The type of lambda expression is therefore argument-typereturn-type (a function type). The argument type is inferred from the function body and the return type is the type of the body expression.

The bindings from outer scopes are accessible for the function literals body expression, and when used create a closure. Mutable bindings will be stored in the closure as implicit references to the bindings.

Multiple arguments (BindArg) can be declared, this creates implicit nested lambda expression for each of the arguments. The following lambda definitions are therefore strictly equivalent:

implicit_inner_lambda = do a b: a + b done;
explicit_inner_lambda = do a: do b: a + b done;

Some special argument forms are accepted:

Unit value literal: ()
The argument type is unit type and no actual argument binding is done.
Single underscore: _
The argument type is a type variable and no actual argument binding is done (essentially a wildcard pattern match).
Structure literal: StructArg
A destructuring binding of the argument is done. This means that the identifiers (Id) used as values for structure fields (FieldId) are bound inside the function body to the actual field values (taken from the structure value given as argument).

List and hash map literals

List        = "[:]" / "[" SP (Items ("," SP)?)? "]";
Items       = HashItem ("," HashItem)* / ListItem ("," ListItem)*;
ListItem    = Expression SP ("\.\." !OpChar Expression)? SP;
HashItem    = Expression Colon Expression SP;

List and hash map literals are syntactically both enclosed in square brackets. The difference is that hash map items have the key expression and colon prepended to the value expression, while list items have only the value expression. Empty hash map constructor is written as [:] to differentiate it from the empty list literal [].

The list literal constructs a immutable single-linked list of its item values (elements). The hash map literal constructs a mutable hash table containing the given key-value associations.

Value expression types of all items are unified, resulting in a single value-type. Hash map literals also unify all items key expression types, resulting in a single key-type. The type of the list literal itself is list<value-type>, and the type of the hash map literal is hash<key-type, value-type>. Empty list and hash map constructors assign type variables to the value-type and key-type.

List literals can contain value ranges, where the lower and higher bound of the range are separated by two consecutive dots (lower-bound .. higher-bound). The items corresponding to the range are created lazily when the list is traversed by incrementing the lower bound by one as long as it doesn't exceed the higher bound. The bound and item types for a list containing range are always number (which means that the value-type is also a number).

Structure literal

Struct      = "{" Field ("," Field)* ","? SP "}";
Field       = SP NoRec? Modifier? FieldId
              (&(SP [,}]) / BindArg* IsType "=" !OpChar AnyExpression) SP;
FieldId     = Id / "``" ^[`]+ "``";
NoRec       = "norec" Space+;
Modifier    = ("get" / "set" / "var") Space+;

Structure literal creates a structure (aka record) value, which contains a collection of named fields inside curled braces. Each field is represented as a binding, where the FieldId is optionally followed by IsType clause narrowing the fields type and/or equals (=) symbol and an expression containing the fields value. The FieldId is either normal identifier or a string enclosed between ``.

Multiple fields are separated by commas. If the field value is not specified by explicit expression, then current scope must contain a binding with same name as the field, and the value of that binding is assigned to the corresponding structure field.

If field value expression is a function literal (either implicit one created by having arguments in the field binding or explicit Lambda block), then a new scope is created inside the structure literal, and used by all field value expressions as a containing scope. All fields having function literal values will create a local binding inside that structure scope (unless prefixed with norec keyword), and the bindings will be recursively available for all expressions residing in the structure literal definition. This is the only form of mutually recursive bindings available in the Yeti language. The local bindings inside the structure scope are always non-polymorphic.

The field names can be prefixed with norec, var, get or set keywords:

The field is mutable within structure (by default a field is immutable).
The field won't create a local binding inside the structure scope, even when it's value is a function literal.
The given value is used as an accessor function that is applied to unit value () to get the actual field value whenever the field value is referenced. The type of the accessor function is ()field-type.
The given value is used as an accessor function that is applied to the value to be assigned whenever a new value is assigned to the field reference. The set accessor is allowed only together with the get accessor. The type of the accessor function is field-type().

The type of structure literal is a structure type. The types of fields are inferred from the values assigned to the fields and produce an allowed fields set for the literals type. The required fields set in the type will be empty.

Block expressions

Conditional expression

If          = "if" !IdChar IfCond ("elif" !IdChar IfCond)* EndIf;
EndIf       = ("else" !IdChar AnyExpression)? "fi" !IdChar /
              "else:" !OpChar Expression;
IfCond      = AnyExpression "then" !IdChar AnyExpression;

Conditional expression provides branched evaluation. When the condition expression before "then" keyword evaluates as true value, then the AnyExpression after the "then" keyword will be evaluated, and resulting value will be the value for the conditional expression.

Otherwise the following elif condition will be examined in the same way. If there are no (more) elif branches, then evaluation of the expression after the "else" keyword will give the value of the conditional expression.

The type of conditions (which precede the "then" keywords) is boolean. The types of branch expressions are unified, and the unified type is used as the type of the whole conditional expression. The unification uses implicit casting rules for elif and else branches.

The final else branch might be omitted, in this case an implicit else branch is created by the compiler. If the unified type of the explicit branches were string, then the value of the implicit else branch will be undef_str, otherwise the implicit else branch will give the unit value () (that has the unit type ()).

Case expression

CaseOf      = "case" !IdChar AnyExpression "of" !IdChar
              Case (Semicolon CaseStmt?)* SP Esac;
Case        = SP Pattern Colon Statement;
CaseStmt    = Case / Statement / SP "\.\.\." Semicolon* SP &Esac;
Esac        = "esac" !IdChar;
Pattern     = Match SP ("::" !OpChar SP Match SP)*;
Match       = Number / String / JavaId SP "#" SP JavaId /
              Variant SP Match / Id /
              "[" SP (Pattern ("," SP Pattern)* ("," SP)?)? "]" /
              "{" FieldPattern ("," FieldPattern)* ("," SP)? "}" /
              "(" SP Pattern? ")";
FieldPattern = SP Id IsType ("=" !OpChar SP Pattern)? SP;

Case expression contains one or more case options separated by semicolons. Each case option has a value pattern followed by colon and expression to be evaluated in case the pattern matches the given argument value (resulting from the evaluation of the AnyExpression between initial "case" and "of" keywords). Only the expression from first matching case option will be evaluated, and the resulting value will be the value of the whole case expression.

The patterns are basically treated as literal values that are compared to the given case argument value, but identifiers in the pattern (Id) act like wildcards that match any value. Each case option has its own scope, and the identifiers from its pattern will have the matching values bound to them during the expression evaluation.

The pattern can contain wildcard identifiers, number and string literals, variant constructor applications, list cell constructor applications (::), list literals, structure literals and static final field references from Java classes (in the Class#field form).

The underscore identifier _ is special in that it wouldn't be bound to real variable (similarly as it's used in function arguments).

The compiler should verify that the case options patterns together provide exhaustive match for the matched value, so at least one case option is guaranteed to match at runtime, regardless of the matched value. Compilation error should be given for non-exhaustive patterns.

The last case option can be ... (but it can't be the only option). This is shorthand for the following case option code:

value: throw new IllegalArgumentException("bad match (\(value))");

It can be useful for marking the case patterns as non-exhaustive (and since it will match any value, it will make the exhaustiveness check to pass).

The matching value type is inferred from each case option pattern, and the resulting types are unified into single type. The pattern type unification works mostly like regular expression type unification, with few exceptions:

  • Variant tags from the pattern form allowed member set in the corresponding variant type, unless the type is also matched with wildcard (in this case required member set is formed in the type).
  • Structure fields from the pattern form required member set in the corresponding structure type.
  • List literal pattern gives list? type instead of list, meaning that values of array type can be also matched to it.

The case option expression types are also inferred and unified into single type, which will be the type of the whole case expression.

Try block

Try         = "try" !IdChar AnyExpression Catches "yrt" !IdChar;
Catch       = "catch" !IdChar ClassId (Space Id)? Colon AnyExpression;
Catches     = Finally / Catch+ Finally?;
Finally     = "finally" !IdChar AnyExpression;

Try block provides exception handling. The expression following the "try" keyword is evaluated first, and if it doesn't throw an exception, the value of it will be used as the value of the try...yrt block.

The exceptions correspond to the JVM exceptions, and therefore the exception types are directly Java class types.

The types of the try and catch section expressions are unified, and the resulting type is used as the type of the try block.

The finally sections expression must have the unit type (), as the value from the evaluation of the finally section is always ignored.

If exception is thrown that matches some catch section (by being same or subclass of its ClassId), then first matching catch section is evaluated, and the resulting value is used as the value of the try block.

If catch section has an exception binding Id, then caught exceptions value will be bound to the given identifier in that sections scope.

The expression following the "finally" keyword will be evaluated regardless of whether any exception was thrown during the evaluation of try and catch sections. If an exception was thrown, then it will be suspended during the evaluation of the finally section. If exception was suspended and the finally section itself throws an exception, then the suspended exception will be dropped (as only one exception per thread is allowed simultaneously), otherwise the suspended exception will be re-thrown after the finally block finishes.

Operator sections

The operator sections can be only in parenthesis.

InParenthesis = FieldRef+ / SP AsIsType / RightSection /
                LeftSection / AnyExpression;
RightSection = SP AnyOp Expression;
LeftSection  = Expression SP AnyOp;

Right section results in a function that applies the operator with argument value as the implicit left-side value, and the expressions value as right-side value. Left section results in a function that applies the operator with expressions value as the left-side value, and the argument value as the implicit right-side value. The expression is evaluated during the evaluation of the section. The sections can be viewed as a syntactic sugar for following partial applications:

right_section = (`operator` expression);
right_section_equivalent = flip operator expression;
left_section = (expression `operator`);
left_section_equivalent = operator expression;

The as and unsafely_as casts can also be used as right sections, that result in a function value that casts its argument value into the given type. The argument type is inferred from the context where the cast section is used, defaulting to type variable ('a). Similarly the instanceof operator can be used as a right section, resulting in a function that checks whether its argument value would pass as instance of the given Java class.

Field references can also be put into parenthesis, giving a function that retrieves the field value from the argument value. The type of single field reference is {.field-name is 'a}'a.

Field reference functions can be seen as syntactic sugar for following lambda expressions:

foo_bar_reference_function = (;
foo_bar_reference_equivalent = do v: done;

Any other expression in parenthesis is the expression itself.

Simple expression

Primitive   = Number / String / "(" SP InParenthesis SP ")" / List /
              Struct / Lambda / If / CaseOf / Try / New / Load / ClassOf /
              Variant / Id;
CPrimitive  = !End Primitive;

Simple expression is an expression that is not composed of subexpressions separated by operators.

The CPrimitive is simple expression that isn't the end keyword. This is used inside class definition block, which is terminated by end (in other places end is normal identifier).

Variant constructor

Variant constructor is written simply as a Variant tag. The type of variant constructor is 'aVariant 'a.

Load operator

Load        = "load" !IdChar ClassName;

Load operator gives value of module determined by the ClassName, and the expressions type is the type of the module.

Alternatively load of module with structure type can be used as a statement on the left side of the sequence operator. In this use all fields of the module value will be brought into scope of right-hand side of the sequence operator as local bindings, and additionally all top-level typedefs from the module will be imported into that scope (excluding the shared typedefs).

New operator

New         = "new" !IdChar ClassName SP NewParam;
NewParam    = ArgList / "[" AnyExpression "]" "[]"*;
ArgList     = "(" SP (Expression SP ("," Expression SP)*)? ")";

New operator constructs an instance of Java class specified by ClassName, and the expressions type is the class type ~ClassName.

Similarly to Java language, the constructor that has nearest match to the given argument types is selected. Compilation fails, if there is no suitable constructor. The exact semantics of class construction come from the underlying JVM used, and can be looked up from the JVM specification.

ClassOf operator

ClassOf     = "classOf" !IdChar ClassId SP "[]"*;

The classOf operator gives Java Class instance corresponding to the JVM class specified by the ClassId. The specified class must exists in the compilation class path. If the class name is followed by [] pairs, then an array class is given. The type of classOf expression is (obviously) ~java.lang.Class.

Rough equivalent to classOf would be using Class#forName method:

stringClass = Class#forName("java.lang.String");
// gives same result as
stringClass = classOf java.lang.String;
// or simply
stringClass = classOf String;

Expression with operators

Operator precedence

Precedence and associativity Operator Description Type
1. suffix .field Field reference {.field is 'a}'a
#field Java object reference  
[] Map reference map<'k, 'e>'k'e
1. left -> Custom reference {.``->`` is 'a'b}'a'b
2. prefix - Arithmetic negation numbernumber
\ Lambda  
3. left   Application ('a'b) → 'a'b
4. left * Multiplication numbernumbernumber
/ Division
div Integer division
% Remainder of integer division
b_and Bitwise and
shl Bitwise left shift
shr Bitwise right shift
with Structure merge  
5. left + Addition numbernumbernumber
- Subtraction
b_or Bitwise or
xor Bitwise exclusive or
6. left   Custom operators  
7. undefined . Function composition ('a'b)('c'a)'c'b
8. left == Equality 'a'bboolean
!= Inequality
< Less than ^a^bboolean
<= Less than or equal
> Greater than
>= Greater than or equal
=~ Pattern match stringstringboolean
instanceof Instance of class 'aboolean
9. prefix not Logical negation booleanboolean
10. left and Logical and booleanbooleanboolean
or Logical or
11. left ^ String concatenation stringstringstring
12. right :: List construction 'alist<'a>list<'a>
:. Lazy list construction 'a(()list<'a>)list<'a>
++ List concatenation list<'a>list<'a>list<'a>
13. suffix is type Type unification typetype
as Type conversion  
unsafely_as Unsafe type coercion  
14. left |> Forward application 'a('a'b)'b
15. left := Assignment 'a'a()
16. right loop Loop boolean()()

Reference operators

Reference   = SP PrefixOp* Primitive RefOp*;
CReference  = SP PrefixOp* CPrimitive CRefOp*;
RefOp       = FieldRef / MapRef / (SP (ObjectRef / "->" SP Primitive));
CRefOp      = FieldRef / MapRef / (SP (ObjectRef / "->" SP CPrimitive));

Reference operators have highest precedence and thereby work on simple expressions.

Reference operators have left associativity.

The -> operator is a function from standard library that is used to provide custom reference operator for structure objects.

PrefixOp    = "\\" SP / "-" SP !OpChar;

The \ prefix operator is shorthand form of lambda expression. A expression in form \value is equivalent to do: value done. The argument value is ignored. If the value is a constant expression, then the result is a constant function.

The - prefix operator is arithmetic negation. Its type is numbernumber, so the negated expression must be a number, and the resulting value is also number. Since - can be also used as binary operator, the prefix operator cannot be used directly as function, but the function value is bound in standard library module yeti.lang.std to negate identifier.

FieldRef    = Dot SP FieldId;

Field reference is a postfix operator that gives value of the given structure field. Its type is {.field is 'a}'a.

MapRef      = "[" Sequence SP "]";

Mapping reference takes two arguments - the mapping value preceding it and the key value expression. The resulting value is the element corresponding to the given key (or index). No whitespace can be before mapping reference operator - if there is whitespace, then it is parsed as application of list literal. The standard library has this operator as at function with type map<'key, 'element>'key'element. The mapping can be either hash map or array.

ObjectRef   = "#" JavaId SP ArgList?;

When ArgList is present, the # operator means method call, otherwise it will be a Java class field reference.

The left side expression of the # operator is expected to have a Java object type (~Something), that must have a field or method named by the JavaId. No type inference is done for the left-side object type.

Since Java classes can have multiple methods with same name, the exact method is resolved by finding one that has the correct number of arguments and best match for the actual argument types. Implicit casting is done for the arguments, if necessary. The resulting expression type is derived from the used methods return type for method calls and field type for object field references.

The # operator cannot be used as a function.


Apply       = Reference (SP AsIsType* Reference)*;
CApply      = CReference (SP AsIsType* CReference)*;

Function application is done simply by having two value expressions (simple values or references) consecutively. Left side value is the function value and the right side is the argument given to the function. Yeti uses strict call-by-sharing evaluation semantics (call-by-sharing is a type of call-by-value evaluation, where references are passed).

The type of application is the functions return type. If the function value type is 'a'b, then the given value must have the same 'a type and the applications resulting value type is the same 'b type.

The application operator has left associativity, for example a b c is identical to (a b) c.

The function expression is evaluated before argument expression. This means also that when multiple arguments are given by curring, then these argument expressions are evaluated in the application order.

Arithmetic operators

Sum         = Multiple SkipSP (SumOp Multiple)*;
CSum        = CMultiple SkipSP (SumOp CMultiple)*;
SumOp       = AsIsType* ("+" / "-") !OpChar / ("b\_or" / "xor") !IdChar;
Multiple    = Apply SkipSP (AsIsType* FactorOp Apply SkipSP)*;
CMultiple   = CApply SkipSP (AsIsType* FactorOp CApply SkipSP)*;
FactorOp    = ("*" / "/" / "%") !OpChar /
              ("div" / "shr" / "shl" / "b\_and" / "with") !IdChar;

Yeti language has the following arithmetic and bitwise logic operators:

Operator Description
+ Arithmetic addition
- Arithmetic subtraction
b_or Bitwise logical or
b_xor Bitwise logical exclusive or
* Arithmetic multiplication
/ Arithmetic division
% Remainder of integer division
div Integer division
b_and Bitwise logical and
shr Bit shift to right (unsigned)
shl Bit shift to left

All arithmetic and bitwise operators have the type numbernumbernumber and left associativity. The bitwise, integer division and remainder operators truncate fractional part from their arguments, doing the given operation using only the integer part of the argument.

Structure override and merge operator with

The expression on the right of the with operator must have a structure type that has an allowed fields set (a non-extensible structure type). The left-side expression must have either structure type or undefined type 'a (a type variable). The with operator has nothing else in common with arithmetic operators, than having the same precedence and left associativity.

The resulting value of the with expression is a structure consisting of all fields from the right-side value, that were in its types allowed field set, and those fields from the left-side structure value, that were not in the right-side expression types allowed field set.

Mutable fields are shared with their originating structure. This means that the structure that gave a mutable field to the resulting structure gets its field updated whenever the field is assigned a new value in the with operators result structure. The get and set field accessor functions are also passed to the resulting structure, so accessing the result structure field still goes through the accessor functions.

The with operator has two distinct use cases, overriding and merging. If the left-side expression also has a structure type with allowed fields set, then a merge operation is done, otherwise only a simple override is done.

For overriding operation the left-side expressions type is unified with structure type that has as a required fields set the right-side types allowed fields set. The result of unification is used as the type of the with expression. Due to the type unification the right-side allowed field set is either same or subset of the left-side values field set, with matching types, and all the corresponding fields are overridden.

For merging operation, the type of the with expression is a new structure type. The result types allowed field set contains all of the right-side types allowed field set, and those fields from the left-side types allowed field set that were not present in the right-side type. A required fields set is not present in the result type, and no unification is done with either left nor right side expression types. Since no unification is done, for a field present on both sides of the with operator the types can be different (only the type from right side is used in this case).

Custom operators

CustomOps   = Sum SkipSP (AsIsType* CustomOp Sum)*;
CCustomOps  = CSum SkipSP (AsIsType* CustomOp CSum)*;
CustomOp    = !(CompareOp / [*/%+-<=>^:\\\.] !OpChar) OpChar+ / IdOp;

Custom operators are any operators that are not built into the language. These operators are defined by simply having a function value bound with name consisting of operator characters, or by using regular identifier between backticks. The operator type is the binding type, and resulting value/type is the result of applying the function value to the given arguments.

Custom operators have left associativity.

Function composition

Compose     = CustomOps (AsIsType* ComposeOp CustomOps)*;
CCompose    = CCustomOps (AsIsType* ComposeOp CCustomOps)*;
ComposeOp   = "\." Space+ / Space+ "\." SP;

Function composition operator composes two functions given as it's arguments. Canonical implementation of the function composition is the following definition:

(.) f g a = f (g a);

The type of the composition operator is ('a'b)('c'a)'c'b.

Dot is considered to be composition operator only when it doesn't have identifier neither directly before or after it (without whitespace). Otherwise the dot denotes reference operator.

Function composition is associative, therefore the operators associativity is undefined.

Comparison operators

Compare     = SP Not* Compose SP (AsIsType* CompareOp Compose)*
              SP InstanceOf*;
CCompare    = SP Not* CCompose SP (AsIsType* CompareOp CCompose)*
              SP InstanceOf*;
InstanceOf  = "instanceof" !IdChar ClassId SP;
Not         = "not" !IdChar SP;
CompareOp   = ("<" / ">" / "<=" / ">=" / "==" / "!=" / "=~" / "!=")
              !OpChar / "in" !IdChar;

Comparison operators compare two values of same type and give boolean result. Comparison operators have left associativity.

Yeti language has the following comparison operators:

Operator Proposition Type
== Left side value is equal to right side 'a'aboolean
!= Left side value is not equal to right side
< Left side value is less than right side ^a^aboolean
<= Left side value is less than or equal to right side
> Left side value is greater than right side
>= Left side value is greater than or equal to right side
=~ Left side string matches regex pattern on the right side stringstringboolean
instanceof operator

The instanceof operator gives true value when the left-side value would pass as an instance of the Java class named on the right of the operator, by being instance of it or its subclass. Otherwise the application of the instanceof operator results in false value. Only the left-side values runtime (JVM) type is considered, the compile-time static type doesn't matter at all, and therefore can be any type, including native Yeti types.

Since the type name is de-facto part of the operator, it can be considered to be suffix operator similarly to the cast operators, and has the type `aboolean.

Logical operators

Logical     = Compare SP (AsIsType* ("and" / "or") !IdChar Compare)*;
CLogical    = CCompare SP (AsIsType* ("and" / "or") !IdChar CCompare)*;

Logical and expression results in true only, if both arguments are true (otherwise the result is false). The right side argument expression is not evaluated, if the left side had a false value.

Logical or expression results in true, if either of arguments true (otherwise the result is false). The right side argument expression is not evaluated, if the left side had a true value.

The type of logical operators is booleanbooleanboolean (the expression results in boolean value and the arguments are boolean as well).

Logical operators have left associativity. Yeti is different from many other programming languages by having same precedence for and and or - this is to encourage using parenthesis to make the grouping explicit.

String concatenation

StrConcat   = Logical SP (AsIsType* "^" !OpChar Logical)*;
CStrConcat  = CLogical SP (AsIsType* "^" !OpChar CLogical)*;

String concatenation operator takes two string values and results in a string value that represents character sequence, that is concatenation of the character sequences from the left side and right side arguments.

The type of the ^ operator is stringstringstring.

String concatenation is associative.

List construction and concatenation

Cons        = StrConcat SP (AsIsType* ConsOp !OpChar StrConcat)*;
CCons       = CStrConcat SP (AsIsType* ConsOp !OpChar CStrConcat)*;
ConsOp      = "::" / ":." / "++";

List construction operator :: takes head value from left side and tail list from right side, and constructs a new list starting with the head value. The type of :: operator is 'alist<'a>list<'a>.

Lazy list construction operator :. is similar, but takes on the right side a function that returns the tail list when applied to unit value (). The type of :. operator is 'a(()list<'a>)list<'a>.

List concatenation operator ++ takes two lists and results in a list that has elements from the left side list followed by the elements from right side list, preserving the order of elements. The resulting list is constructed lazily. The type of ++ operator is list<'a>list<'a>list<'a>.

List construction and concatenation operators have right associativity.


AsIsType    = ("is" / "as" / "unsafely\_as") !IdChar Type;

Cast operators are in reality suffix operators, as the type description on their right side that can be considered to be part of the operator.

The is operator unifies the left side expressions type with the type on the right side. The resulting value type is the unified type. It passes the value unmodified, and due to the unification process the argument expressions type is same as the resulting type. Its only effect is compile-time narrowing of expression type and unification error on unexpected type.

The as cast operator does a safe conversion of the argument value into a value with given result type. The compiler verifies that the conversion is guaranteed to be possible, and if needed, generates code to convert the value into representation required by the given type. It's typically used for conversions between Yeti native types and Java object types, and for upcasting the Java types. A special case of as cast is casting into opaque types.

The unsafely_as cast operator does a unsafe type coercion into a value with the given result type. Unlike as cast, no value conversion will be done, only JVM primitive checkcast opcode is used to change the underlying JVM object type. The compiler allows any coercion between Java object types that have subclass relation (both downcasts and upcasts are possible, although it is more reasonable to use as for upcasting). One of the argument or result types can also be a Yeti native type that is represented by JVM type having a subclass relation to the other type. Using unsafely_as with native Yeti type makes the typesystem unsound, as the compiler cannot be sure anymore that the runtime value matches the expected static type.

Both as and unsafely_as casts decouple the argument and result types, limiting type inference.

Forward application

ApplyPipe   = Cons SP ("|>" !OpChar Cons)* AsIsType*;
CApplyPipe  = CCons SP ("|>" !OpChar CCons)* AsIsType*;

Forward application applies the right side function value to the left side value. Its essentially equivalent to normal application (function value followed by value given as argument), providing just better readability in some cases.

The type of forward application operator is 'a('a'b)'b and it has a left associativity (x |> f |> g is same as (x |> f) |> g or g (f x)).

Assigning values

Assign      = ApplyPipe SP (":=" !OpChar ApplyPipe)?;
CAssign     = CApplyPipe SP (":=" !OpChar CApplyPipe)?;

The left-side expression must provide a mutable box - either mutable variable, mutable structure field or a mapping reference (having the form expression[key]).

Assign operator stores into the mutable box a value from evaluation of the right-side expression. The mutable boxes always store only a value reference, which means that actual copy of the value is never done by assignment (giving a sharing semantics for values that contain mutable boxes by themselves, exactly as it is with the call-by-sharing function application arguments).

The types of left-side and right-side expressions are unified. The result of assignment expression is a normal () value, not a mutable box.

The evaluation order between left and right side of assignment is unspecified.


Expression  = Assign SP ("loop" !IdChar Assign)* ("loop" !IdChar)?;
CExpression = CAssign SP ("loop" !IdChar CAssign)* ("loop" !IdChar)?;

The expression left of loop operator must have a boolean type and the right-side expression must have a () type. The right-side expression may be omitted, in this case implicit () value is used in its place. The whole loop expression has () type.

First the left-side expression is evaluated. The evaluation of loop expression terminates only when the left-side evaluation results in false value or exception is thrown. Otherwise the right-side expression is evaluated, and if no exception was thrown, the loop expression evaluation is restarted (repeating the loop while left-side is true).

The loop operator has right associativity and cannot be used as a section or function.

Value and function bindings

Binding     = (StructArg / Var? !Any Id BindArg* IsType)
              SP "=" !OpChar Expression Semicolon+ SP;
CBinding    = (StructArg / Var? !(Any / End) Id (!End BindArg)* IsType)
              SP "=" !OpChar CExpression Semicolon+ SP;
Var         = "var" Space+;
Any         = "\_" !IdChar;

Binding expression creates a new scope with a value from evaluation of the Expression bound to the given identifier (Id). The binding is part of sequence expression, and the new scope is used for the following expressions in the sequence (the part of sequence expression following the binding can be considered to be part of the binding expression). The type of the expression is used as the binding type.

A mutable variable binding is created, if the var keyword precedes the binding name (Id). The mutable variable acts as a mutable box where new values can be assigned. When a closure is created over a mutable variable, a reference to the mutable box is stored in the closure, without making a copy of the variable.

When underscore _ is used as binding name, no binding or new scope is created - the expression is still evaluated, but its value is discarded after the evaluation. This can be useful when the evaluation is performed only for its side effects.

Function arguments (BindArg) may be present after the binding name (Id). This is treated as a syntactic sugar for binding a lambda expression - the compiler replaces the Expression with a do .. done block containing the Expression, and the function arguments are used as the lambda expressions arguments.

If the bound value is a function literal (either explicitly written or implicit as described in the previous paragraph), then the binding is available in the lambda expressions body scope, where it is not polymorphic. Otherwise the bound expressions scope does not include the binding itself (therefore an outer scopes binding with the same name can be accessed, if one exists).

If a binding type is given (IsType before the = symbol), it will be unified with the bound expression type. This is equivalent to using is operator unless the binding type is flexible.

Destructuring binding is done, if a structure literal StructArg is used instead of binding name (no function arguments may follow it). In this case the evaluation of the Expression must result in a structure value, and for each structure field in the StructArg the identifier used as a value is bound to the actual corresponding field value in the evaluation result. The bound expression type is unified with a structure type where required member set contains each field from the StructArg, with the field types used for the corresponding created bindings.

Self-binding lambda expression

SelfBind    = (Id BindArg+ / Any) IsType "=" !OpChar;
CSelfBind   = (!End Id (!End BindArg)+ / Any) IsType "=" !OpChar;

This is another syntax for writing function literals, that comes from generalizing the function binding. If the binding has arguments and is either last statement in the sequence expression, or not part of sequence, then it is considered to be a standalone lambda expression. For example, an expression (_ x = x) is equivalent to do x: x done.

Just like with normal function bindings, if the binding name (Id) is not an underscore _, then a recursive non-polymorphic binding is created, that is available in the lambda expressions scope.

Class definition

Class       = "class" !IdChar JavaId SP MethodArgs? Extends?
              (End / Member ("," Member)* ","? SP End);
Extends     = "extends" !IdChar ClassName SP ArgList? SP ("," ClassName SP)*;
Member      = SP (Method / ClassField) SP;

Class definition creates a Java class with a given name (JavaId) inside the same JVM package where the containing module or program resides. The class will be public, if the definition is part of modules top-level sequence expression, otherwise it has package access. Public classes must be generated by the compiler to be usable outside of Yeti code, for example by normal Java code, without any explicit initialization of the containing Yeti module.

Class definition in sequence expression also introduces a new scope with new class name binding (the class name bindings have separate namespace). Non-public classes can be constructed or extended only using that binding in Yeti code. Attempts to instantiate them outside of their scope will result in undefined behavior.

The extends list can contain a single class name (that will be the superclass) and any number of interface names (that will be implemented). The java.lang.Object will be used as default superclass, if superclass is not given in the extends list.

The class will be automatically marked as abstract, if it contains abstract methods, either defined by the class itself, or derived from superclass or any of the implemented interfaces without being overridden with concrete implementation by the class itself. The words abstract, public and package are used here with the meaning these words have in the Java language.

The class scope is the scope inside the class definition, that initially contains constructor arguments and special bindings this and super. The this binding denotes instance of the class. The super binding also denotes instance of the class, but can be used only for calling method on it, and any overridden method called on super binding will invoke the parent classes corresponding method. The JVM invokespecial instruction is used for that effect. Any other use of super binding (like passing the instance value) is forbidden.

The class name may be followed by constructor argument list in parenthesis. The constructor arguments will be bound in the classes scope and stored in implicit private fields. The constructor argument type declaration and value conversion is done in the same way as with the method arguments. Only single constructor is created for the class.

Bindings from outside scope are accessible inside the class, and those used may be stored in implicit private fields.

Class field

ClassField  = ("var" Space+)? !End Id SP (!End BindArg SP)*
              "=" !OpChar CExpression;

A class field is a binding inside the class scope, that redefines the class scope for all class methods and subsequent fields. A value from evaluation of the CExpression is bound to the given identifier (Id), and a new scope containing the field binding will be the new class scope. Consequently, the scope of class field expression contains previous (but not following) class field bindings, and all method expression scopes contain all field bindings.

The class field is similar to bindings in the sequence expression:

  • The var keyword can be used to define mutable field binding.
  • Using underscore (_) as field name omits the actual binding and new scope, but still forces the evaluation of expression at class instance construction time.
  • Lambda expression can be created by including arguments (BindArg) after the field name.

If a field named serialVersionUID is defined with value being numeric constant, then the compiler must generate a private static final long serialVersionUID field with the given initialization value into generated JVM class.

Class method

Method      = (("abstract" / "static") Space)? MethodType JavaId
              MethodArgs Semicolon* MethodBody?;
MethodArgs  = "(" SP (")" / MethodArg ("," MethodArg)* ")") SP;
MethodType  = SP ClassName SP "[]"* SP;
MethodArg   = MethodType Id SP;
MethodBody  = CStatement (Semicolon CStatement?)*;

The method definition creates a new method into the containing Java class.

The abstract modifier marks method to be declared without actual implementation in the same way as in the Java language.

The static modifier marks the generated JVM method as static and is allowed only in public classes (those are defined in the modules top-level sequence expression).

The method signature after the optional modifier starts with return type and method name, followed by argument list in parenthesis. The return value and argument types in the signature are Java types (not Yeti types), and can denote either primitive Java types (byte, short, char, int, long, float, double, boolean) or a Java classname.

Non-abstract methods have a method body expression after the method signature, which is evaluated when the method is invoked.

The body expression for non-static methods is in the final class scope, thus all field bindings are visible to the method body, along with constructor arguments, and this and super instance bindings. The static methods use for body expression the scope containing the class, so no class-specific value bindings are visible there.

No exception declarations are supported for the Java class methods defined in the Yeti code, and any method can throw any exception (it violates the Java language semantics, but is valid for the underlying JVM).

While the method argument types are declared as Java types, the argument bindings have Yeti types and implicit argument casting rules are used to convert the values having Java primitive types (as there are no Yeti primitive types). The body expression type is inferred in the same way from the declared Java return type. A reverse conversion is done for the returned value, when the return type is a Java primitive type.


Declaration  = ClassDecl / Binding;
CDeclaration = ClassDecl / CBinding;
MDeclaration = TypeOrImport / Binding;
ClassDecl    = Class Semicolon+ SP / TypeOrImport;
TypeOrImport = Import Semicolon+ SP / Typedef Semicolon* SP;

Declarations are parts of sequence expression used to define new bindings that can be by the following expression parts.

Java class imports

Import      = "import" !IdChar Space+ ClassName
              (Colon JavaId SP ("," JavaId SP)*)?;

Class import creates a new scope for the following parts of the sequence expression, that contains imported class name bindings (in separate namespace from other bindings). Class name bindings associate the short class name in the local scope with full name containing the package path (as given in the import).

The actual existence of the class is not verified by the compiler (errors are given only when the binding is actually used and for example class method or field signature cannot be be resolved).

The import declaration has two possible forms. The simple form has single full class name (dot-separated package path and class name) after the import keyword. The package import has package path without class after the import keyword, followed be colon and comma separated list of class names to be imported from that package.

Unlike Java, the Yeti language doesn't support importing entire package with asterisk.

Type definition

Typedef     = "typedef" !IdChar SP TypedefOf Semicolon*;
TypedefOf   = "unshare" !IdChar SP Id /
              (("opaque" / "shared") !IdChar SP)?
              Id SP TypedefParam? "=" !OpChar Type;
TypedefParam = "<" !OpChar SP Id SP ("," SP Id SP)* ">" !OpChar SP;

Type definition creates a new scope for the following parts of the sequence expression, that contains the given Type bound to the given identifier (Id). Such binding can be considered to be a type alias.

A copy is made of the bound type on every reference to preserve polymorphism, if it contains any type variables. The shared modifier disables this behaviour, so the bound type itself will get unified with every reference of the shared binding (this can be used to infer typedefs from code). The shared typedefs are available only locally in the declaring module.

The unshare declaration can be later used to transform the former shared typedef into normal polymorphic typedef (that will bind a copy of the shared type).

Type definitions can have parameter list between <> symbols (when not provided, it is same as having empty list). These will create type variables bound in the scope of definition of the Type itself. The parameters must also be provided when the bound definition is used. The given parameters will be unified to the corresponding ones in the copy of the bound type.

The binding of type to Id is also available for the definition of the Type itself, so recursive types can be defined, but the binding has no parameters there. It is created by first creating a type variable bound to the Id in the type definition scope, which is thereafter unified with the defined type.

The opaque modifier causes a new unique type to be created and bound to the given identifier (Id). The new type will be incompatible with the given Type (no unification is allowed), but an as cast can be used to convert between the new type and type given in the typedef declaration. The casting is allowed only in the same module where the opaque type was created. The opaque typedef can also have parameters, that act both as type parameters for the new opaque type, and can also be referenced in the Type associated with it (parameters will be unified when casting). No type variables other than these parameters are allowed in the opaque typedef.

Sequence expression

AnyExpression = Semicolon* Sequence? SP;
Sequence   = Statement (Semicolon Statement?)*;
Statement  = SP ClassDecl* (SelfBind / Declaration* SelfBind?) Expression;
CStatement = SP ClassDecl* (CSelfBind / CDeclaration* CSelfBind?) CExpression;
MStatement = SP TypeOrImport* (SelfBind Expression /
                              MDeclaration* (Class / SelfBind? Expression));

Sequence expression is the general form of Yeti expressions, consisting of declarations that create new scopes with bindings, and expressions to be evaluated in those scopes. The sequence expression is evaluated from left to right, and each new binding will create a scope containing the rest of sequence expression (subsequent bindings with same name and kind will shadow the previous bindings from outer scopes). The value and type of sequence expression is the value and type of the last part of it, which must be an expression therefore (not declaration). Empty sequence expressions are also allowed and have unit type (the unit value literal () can be considered to be an empty sequence expression). Intermediate expressions are required to have an unit type and are evaluated only for side effects.

Top level of the source file

TopLevel    = Module / Program? AnyExpression;
Program     = "program" !IdChar Space+ ClassName Semicolon;
Module      = "module" !IdChar Space+ ClassName
              (Colon SP "deprecated")? Semicolon+ ModuleMain? SP;
ModuleMain  = MStatement (Semicolon MStatement?)*;

The Yeti language source file can contain either program or module.

Both program and module are basically an expression that can be evaluated. Program must have an unit type and is evaluated for side effects each time when it is run. Module can have any type and is considered to be an constant expression, that is evaluated once when it is referenced first time using load expression. Modules also export top-level bindings of type and Java class definitions that can be used by other modules and programs (as an exception from other Yeti expressions, the modules top-level expression can end with class definition that is considered to have an unit type).

Modules are distinguished from programs by starting with module keyword, that is followed by module name. The deprecated option can be used to mark the module deprecated. Programs can optionally start with program keyword and program name, but if this is omitted, the source file name will be used as program name (without the .yeti suffix).

Yeti compiler compiles both programs and modules into public JVM classes. Program classes have public static main method that has to be invoked to run the program. Module classes have public static eval method that returns the modules value as JVM Object. Non-public helper classes may be generated as needed for representing the expression parts in the JVM.

Type system

Yeti uses Hindley-Milner type system with some extensions. Type inference is used (a variant of algorithm W), which allows the compiler to deduce static types for most code without any type declarations. In essence, the most general possible type is assigned to expression parts, as the AST is walked. When expression parts with different types are connected, an unification is performed to determine the most general subset of the given types, which is then assigned to the connected type node. Some operations like as, unsafely_as and implicit casts done for Java interfacing break the connection between type nodes, and therefore may require additional type declarations.

Primitive types

Primitive types are inbuilt types that don't have any type parameters.

Type JVM representation Description
() null Type with single possible value, used when no information needs to represented.
boolean java.lang.Boolean Boolean value, either true or false. JVM null is considered to be false.
number yeti.lang.Num Any kind of numeric value (integer, decimal, rational or 64-bit IEEE754 floating point).
string java.lang.String UTF-16 code unit sequence.

Type variables

Type variables represent an undetermined type, that can be replaced with any other type (some restrictions are possible). As such, Yeti type variables are universally quantified and provide a way to define parametric types. Same type variable can be used multiple times in same type expression, denoting that each occurrence refers to same type instance.

Type variables can be restricted to be ordered and/or tainted (the restrictions can be considered to be builtin type classes). Ordered type variable can be replaced only with ordered types. Tainting marks polymorphism restriction and is used for types associated with mutable stores. All restrictions are retained when type variables are unified.

Syntactically an apostrophe followed by identifier unique for each variable is used to represent variables within type expressions. Caret followed by identifier represents ordered type variable (^a) and identifier starting with underscore denotes a tainted variable ('_a).

Function type

Function type consists of argument type and application result type ('argument'result). Unification of function types is done by unifying the corresponding contained argument and result types.

Java types

Java types correspond to JVM class names and array types, similarly to non-primitive types in the Java language (for example value having type ~java.util.Date[] should be a JVM array of java.util.Date class instances). Primitive Java types like int can be used only as part of JVM array types (for example ~int[]). Java types unify only when the class name and dimension are same in both types.

Inbuilt map type

Map type is an internal composite type used for inbuilt collection types. It is available in the type definitions only using inbuilt aliases. The internal map type has three type parameters:

Marker type none on the non-indexable list type, and the number type for array indexes. Any value type can be used for hash table keys.
Type of the values stored in the collections (should be an actual value type).
List marker type is used for lists and arrays and hash marker type is used for hash tables.

The map type is visible via following inbuilt aliases:

map<key, value>
This corresponds to the internal map type with type variable as the kind parameter. It is therefore the most general alias of the internal map type and is usually used in places where both array and hash would work.
List provides immutable interface for singly linked list operations and corresponds to map<none, value> with list as kind type. The reference implementation uses null for empty list and instances extending the yeti.lang.AList abstract class. Lists implementations are used for simple linked lists, iterators and JVM primitive array views.
Array provides mutable ordered collection with O(1) index access and amortized O(1) appending. It corresponds to map<number, value> with list as kind type. The reference implementation uses yeti.lang.MList class (mutable list), which contains simple reference array together with length and offset values as the back-end.
This is list-like collection corresponding to map<'a, value> with list as the kind type. It is used in places where both list and array are suitable (for example head and tail library functions).
hash<key, value>
This gives mutable table mapping of keys to values. The default implementation is hash table (at JVM level instances of yeti.lang.Hash, which extends the java.util.HashMap).

The compiler messages use the most specific alias matching the internal map type. The map types (and it's manifestations) unification is done via unification of all three corresponding type parameters.

Internal marker types used as map parameters

This is used as placeholder key type for immutable lists.
This is used as kind type for arrays and immutable lists.
This is used as kind type for hash tables.

Structure and variant types

Opaque types