Skip to content
Permalink
Browse files

ath79: add support for TP-Link Archer A7

This patch adds support for TP-Link Archer A7

Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) SoC internal
  - 5GHz (ac) QCA988x
- USB: 1x USB 2.0 port
- Button: 1x power, 1x reset, 1x wps
- LED: 10x LEDs
- UART: holes in PCB
  - Vcc, GND, RX, TX from ethernet port side
  - 115200n8

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin
via the Webinterface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the Archer A7
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the tftp
   root directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
   and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing

Changes since first revision:

  - Flash instructions using stock image webinterface
  - Changed "Version 5" in model string to "v5"
  - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi
    and qca9563_tplink_archer-a7-v5.dts
  - Firmware image is now build with dynamic partitioning
  - Default to ath10k-ct

Changes since second revision:
  - Changed uboot@0 to uboot@20000 in DTS file
  - Fixed ordering issue in board led script
  - Specify firmware partition format in DTS file
  - Rebased Makefile device definition on common
    Device/tplink-safeloader-uimage definition
  - Merged switch section in network script
    (same configuration as tplink,tl-wdr3600
    and tplink,tl-wdr4300)

Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
  • Loading branch information...
k1ll authored and blogic committed Dec 12, 2018
1 parent d9753f0 commit 1e4ee63cc8d1889a78b539a5ed7be8d56e9b976f
@@ -52,6 +52,13 @@ pcs,cr3000)
ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
;;
tplink,archer-a7-v5)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
@@ -134,6 +134,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
tplink,archer-a7-v5|\
tplink,tl-wdr3600|\
tplink,tl-wdr4300)
ucidef_add_switch "switch0" \
@@ -104,6 +104,7 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
tplink,archer-a7-v5|\
tplink,archer-c7-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
@@ -0,0 +1,50 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include "qca9563_tplink_archer-x7-v5.dtsi"

/ {
compatible = "tplink,archer-a7-v5", "qca,qca9563";
model = "TP-Link Archer A7 v5";
};

&mtdparts {
factory-uboot@0 {
label = "factory-uboot";
reg = <0x000000 0x020000>;
read-only;
};

uboot: u-boot@20000 {
label = "u-boot";
reg = <0x020000 0x020000>;
read-only;
};

firmware@40000 {
label = "firmware";
reg = <0x040000 0xec0000>;
compatible = "denx,uimage";
};

info: info@f40000 {
label = "info";
reg = <0xf40000 0x020000>;
};

config: config@f60000 {
label = "config";
reg = <0xf60000 0x050000>;
};

partition@fc0000 {
label = "partition-table";
reg = <0xfc0000 0x010000>;
};

art: art@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
@@ -0,0 +1,202 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};

aliases {
led-status = &system;
};

gpio_leds: leds {
compatible = "gpio-leds";

system: system {
label = "tp-link:green:system";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};

led_wlan2g: wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};

usb {
label = "tp-link:green:usb";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
};

gpio_keys: keys {
compatible = "gpio-keys";

reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};

wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};

gpio-export {
compatible = "gpio-export";

gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};

&pcie {
status = "okay";
};

&uart {
status = "okay";
};

&gpio {
status = "okay";
};

&usb_phy0 {
status = "okay";
};

&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";

hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

&gpio_leds {
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};

wan {
label = "tp-link:green:wan";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};

wan_fail {
label = "tp-link:orange:wan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};

lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
};

lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};

lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "off";
};

lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};

wps {
label = "tp-link:green:wps";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};

&spi {
status = "okay";
num-cs = <1>;

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

mtdparts: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};

&mdio0 {
status = "okay";

phy-mask = <0>;

phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";

qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xcb37cb37 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};

&eth0 {
status = "okay";

pll-data = <0x03000101 0x00000101 0x00001919>;

phy-mode = "sgmii";
mtd-mac-address = <&info 0x8>;
phy-handle = <&phy0>;
};

&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};
@@ -1,5 +1,17 @@
include ./common-tp-link.mk

define Device/tplink_archer-a7-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_TITLE := TP-LINK Archer A7 v5
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-A7-V5
BOARDNAME := ARCHER-A7-V5
SUPPORTED_DEVICES += archer-a7-v5
endef
TARGET_DEVICES += tplink_archer-a7-v5

define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
@@ -357,6 +357,46 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},

/** Firmware layout for the A7-V5 */
{
.id = "ARCHER-A7-V5",
.support_list =
"SupportList:\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
.support_trail = '\x00',
.soft_ver = "soft_ver:1.0.0\n",

/* We're using a dynamic kernel/rootfs split here */
.partitions = {
{"factory-boot", 0x00000, 0x20000},
{"fs-uboot", 0x20000, 0x20000},
{"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
/* Stock: name file-system base 0x160000 size 0xda0000 */
{"default-mac", 0xf40000, 0x00200},
{"pin", 0xf40200, 0x00200},
{"device-id", 0xf40400, 0x00100},
{"product-info", 0xf40500, 0x0fb00},
{"soft-version", 0xf50000, 0x00100},
{"extra-para", 0xf51000, 0x01000},
{"support-list", 0xf52000, 0x0a000},
{"profile", 0xf5c000, 0x04000},
{"default-config", 0xf60000, 0x10000},
{"user-config", 0xf70000, 0x40000},
{"certificate", 0xfb0000, 0x10000},
{"partition-table", 0xfc0000, 0x10000},
{"log", 0xfd0000, 0x20000},
{"radio", 0xff0000, 0x10000},
{NULL, 0, 0}
},

.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},

/** Firmware layout for the C25v1 */
{
.id = "ARCHER-C25-V1",
@@ -1581,7 +1621,7 @@ static void build_image(const char *output,
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);
} else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
} else if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 || strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);
}

0 comments on commit 1e4ee63

Please sign in to comment.
You can’t perform that action at this time.