Skip to content
Permalink
Browse files

ramips: Xiaomi MIR3G: detect board name from DTS

- Former "mir3g" board name becomes "xiaomi,mir3g".
- Reorder some entries to maintain alphabetical order.
- Change DTS so status LEDs (yellow/red/blue) mimic
  Xiaomi stock firmware: (Section Indicator)
<http://files.xiaomi-mi.co.uk/files/router_pro/router%20PRO%20EN.pdf>
<http://files.xiaomi-mi.co.uk/files/Mi_WiFi_router_3/MiWiFi_router3_EN.pdf>
|Yellow: Update (LED flickering), the launch of the system (steady light);
|Blue: during normal operation (steady light);
|Red: Safe mode (display flicker), system failure (steady light);

Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com>
[Added link to similar Router 3 model]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  • Loading branch information
Ozgur Can Leonard authored and chunkeey committed Mar 19, 2019
1 parent f22c33b commit 201d3d1a82e62bd139950571fc30f6b49d395378
@@ -32,7 +32,7 @@ zbt-wg2626)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
;;
xiaomi,mir3p|\
mir3g)
xiaomi,mir3g)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
esac
@@ -236,17 +236,6 @@ mikrotik,rbm11g)
miniembplug)
set_wifi_led "$boardname:red:wlan"
;;
xiaomi,mir3p)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
;;
mir3g)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
;;
mlw221|\
mlwg2)
set_wifi_led "$boardname:blue:wifi"
@@ -421,6 +410,17 @@ wrh-300cr)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
;;
xiaomi,mir3g)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
;;
xiaomi,mir3p)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
;;
xzwifi,creativebox-v1)
ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
;;
@@ -179,10 +179,6 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
;;
mir3g)
ucidef_add_switch "switch0" \
"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
;;
psg1218b)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
@@ -437,6 +433,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"4:lan" "0:wan" "6@eth0"
;;
xiaomi,mir3g)
ucidef_add_switch "switch0" \
"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
;;
xiaomi,mir3p)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
@@ -568,10 +568,6 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_binary factory_info 13)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
mir3g|\
xiaomi,mir3p)
lan_mac=$(mtd_get_mac_binary Factory 0xe006)
;;
miwifi-mini)
wan_mac=$(cat /sys/class/net/eth0/address)
lan_mac=$(macaddr_setbit_la "$wan_mac")
@@ -653,6 +649,10 @@ ramips_setup_macs()
wlr-6000)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
;;
xiaomi,mir3g|\
xiaomi,mir3p)
lan_mac=$(mtd_get_mac_binary Factory 0xe006)
;;
*)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -277,9 +277,6 @@ ramips_board_detect() {
*"Mercury MAC1200R v2")
name="mac1200rv2"
;;
*"Mi Router 3G")
name="mir3g"
;;
*"MicroWRT")
name="microwrt"
;;
@@ -37,11 +37,11 @@ platform_do_upgrade() {

case "$board" in
hc5962|\
mir3g|\
r6220|\
netgear,r6350|\
ubnt-erx|\
ubnt-erx-sfp|\
xiaomi,mir3g|\
xiaomi,mir3p)
nand_do_upgrade "$ARGV"
;;
@@ -10,10 +10,10 @@
model = "Xiaomi Mi Router 3G";

aliases {
led-boot = &led_status_blue;
led-failsafe = &led_status_blue;
led-boot = &led_status_yellow;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_blue;
led-upgrade = &led_status_yellow;
};

memory@0 {
@@ -28,7 +28,7 @@
leds {
compatible = "gpio-leds";

status_red {
led_status_red: status_red {
label = "mir3g:red:status";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
@@ -38,7 +38,7 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};

status_yellow {
led_status_yellow: status_yellow {
label = "mir3g:yellow:status";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
@@ -59,7 +59,7 @@
};
};

keys {
button {
compatible = "gpio-keys-polled";
poll-interval = <20>;

@@ -70,7 +70,7 @@
};
};

reg_usb_vbus: reg_usb_vbus {
reg_usb_vbus: regulator {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
@@ -251,7 +251,7 @@ define Device/xiaomi_mir3p
endef
TARGET_DEVICES += xiaomi_mir3p

define Device/mir3g
define Device/xiaomi_mir3g
DTS := MIR3G
BLOCKSIZE := 128k
PAGESIZE := 2048
@@ -264,11 +264,12 @@ define Device/mir3g
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_TITLE := Xiaomi Mi Router 3G
SUPPORTED_DEVICES += R3G
SUPPORTED_DEVICES += mir3g
DEVICE_PACKAGES := \
kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic \
uboot-envtools
endef
TARGET_DEVICES += mir3g
TARGET_DEVICES += xiaomi_mir3g

define Device/mt7621
DTS := MT7621

0 comments on commit 201d3d1

Please sign in to comment.
You can’t perform that action at this time.