diff --git a/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts b/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts
new file mode 100644
index 00000000000000..feb57fecffc93d
--- /dev/null
+++ b/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl838x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "engenius,ews2910p", "realtek,rtl838x-soc";
+	model = "EnGenius EWS2910P";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_fault;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		led_mode {
+			label = "led-mode";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	gpio1: rtl8231-gpio {
+		compatible = "realtek,rtl8231-gpio";
+		#gpio-cells = <2>;
+		gpio-controller;
+		indirect-access-bus-id = <0>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			label = "green:power";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan_mode: led-1 {
+			label = "green:lan-mode";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led_fault: led-2 {
+			label = "amber:fault";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led_poe_max: led-3 {
+			label = "amber:poe-max";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "u-boot-env";
+				reg = <0x80000 0x10000>;
+				read-only;
+			};
+			partition@90000 {
+				label = "u-boot-env2";
+				reg = <0x90000 0x10000>;
+			};
+			partition@a0000 {
+				label = "jffs2-cfg";
+				reg = <0xa0000 0xd60000>;
+			};
+			partition@e00000 {
+				label = "jffs2-log";
+				reg = <0xe00000 0x200000>;
+			};
+			partition@1000000 {
+				compatible = "openwrt,uimage";
+				label = "firmware";
+				reg = <0x1000000 0x800000>;
+				openwrt,ih-magic = <0x03802910>;
+			};
+			partition@1800000 {
+				label = "firmware2";
+				reg = <0x1800000 0x800000>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	mdio: mdio-bus {
+		compatible = "realtek,rtl838x-mdio";
+		regmap = <&ethernet0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
+	};
+};
+
+&switch0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		SWITCH_PORT(8, 1, internal)
+		SWITCH_PORT(9, 2, internal)
+		SWITCH_PORT(10, 3, internal)
+		SWITCH_PORT(11, 4, internal)
+		SWITCH_PORT(12, 5, internal)
+		SWITCH_PORT(13, 6, internal)
+		SWITCH_PORT(14, 7, internal)
+		SWITCH_PORT(15, 8, internal)
+
+		port@28 {
+			ethernet = <&ethernet0>;
+			reg = <28>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk
index df145cfb6979cc..f38e4977d2aaff 100644
--- a/target/linux/realtek/image/rtl838x.mk
+++ b/target/linux/realtek/image/rtl838x.mk
@@ -42,6 +42,19 @@ define Device/d-link_dgs-1210-28
 endef
 TARGET_DEVICES += d-link_dgs-1210-28
 
+# The "IMG-" uImage name allows flashing the iniramfs from the vendor Web UI.
+# Avoided for sysupgrade, as the vendor FW would do an incomplete flash.
+define Device/engenius_ews2910p
+  SOC := rtl8380
+  IMAGE_SIZE := 8192k
+  DEVICE_VENDOR := EnGenius
+  DEVICE_MODEL := EWP2910P
+  UIMAGE_MAGIC := 0x03802910
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | \
+	uImage gzip -n 'IMG-0.00.00-c0.0.00'
+endef
+TARGET_DEVICES += engenius_ews2910p
+
 define Device/inaba_aml2-17gp
   SOC := rtl8382
   IMAGE_SIZE := 13504k