Skip to content
Permalink
Browse files

ath79: add support for ROSINSON WR818 board

This commit adds support for the ROSINSON WR818 WiFi-Router

SoC:    Qualcomm Atheros QCA9563,
FLASH:  Winbond W25Q128FV 16MBytes,
WiFi:   QCA9563 b/g/n 3x3 450Mbit/s,
USB:    1x USB 2.0 Type A, 1x USB2.0 Type C,
IN:     WPS/Reset button GPIO1,
OUT:    Power LED red, Internet LED red, WLAN LED red,
        LAN1 LED red, LAN2 LED red, System LED red,
UART:   RX-GPIO18, TX-GPIO22,

Tested and working:
    - Ethernet (LAN + WAN)
    - WiFi
    - OpenWRT sysupgrade
    - Button
    - LEDs

Installation of OpenWRT from vendor firmware:
    - Connect to the Web-interface at http://192.168.1.1
    - Go to "Administration" -> "Firmware Upgrade"
    - Upload the OpenWrt sysupgrade image

Signed-off-by: Rosy Song <rosysong@rosinson.com>
  • Loading branch information...
rosysong authored and mkresin committed Oct 7, 2018
1 parent 7574781 commit 31469aebd4c737ba891ceffc58db59c6b039445c
@@ -111,6 +111,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
;;
rosinson,wr818)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"
;;
tplink,archer-c7-v1|\
tplink,archer-c7-v2|\
tplink,tl-wdr4900-v2)
@@ -230,6 +234,10 @@ ath79_setup_macs()
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")
;;
rosinson,wr818)
wan_mac=$(mtd_get_mac_binary factory 0)
lan_mac=$(macaddr_setbit_la "$wan_mac")
;;
tplink,tl-wr1043nd-v4)
base_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
@@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
model = "ROSINSON WR818";
compatible = "rosinson,wr818", "qca,qca9560";

chosen {
bootargs = "console=ttyS0,115200n8";
};

aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};

gpio_leds: leds {
compatible = "gpio-leds";

system: system {
label = "wr818:red:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};

wifi_2g {
label = "wr818:red:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};

keys {
compatible = "gpio-keys";

reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};

&uart {
status = "okay";
};

&gpio {
status = "okay";
};

&spi {
num-cs = <1>;

status = "okay";

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};

partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};

partition@50000 {
label = "firmware";
reg = <0x050000 0xf80000>;
};

info: partition@fd0000 {
label = "factory";
reg = <0xfd0000 0x010000>;
read-only;
};

art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};

&mdio0 {
status = "okay";

phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";

qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};

&eth0 {
status = "okay";

mtd-mac-address = <&info 0x0>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};

&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

&usb_phy0 {
status = "okay";
};

&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";

port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

&usb_phy1 {
status = "okay";
};

&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";

port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
@@ -344,6 +344,14 @@ define Device/phicomm_k2t
endef
TARGET_DEVICES += phicomm_k2t

define Device/rosinson_wr818
ATH_SOC := qca9563
DEVICE_TITLE := ROSINSON WR818
IMAGE_SIZE := 15872k
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += rosinson_wr818

define Device/wd_mynet-wifi-rangeextender
ATH_SOC := ar9344
DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender

0 comments on commit 31469ae

Please sign in to comment.
You can’t perform that action at this time.