Skip to content
Permalink
Browse files

ramips: several fixes for HC5x61

 - Mark other partitions as read-only for HC5x61

 - Only enable USB and PCIe for HC5761/HC5861
   HC5661 doesn't have a USB port, and there is nothing attached to its PCIe.

 - Fix HC5761 switch ports
   HC5761 has only 3 ethernet ports (1x WAN + 2x LAN). Remove unused ports.

 - Fix HC5861 5GHz radio
   HC5861 has MT7612EN 5GHz WiFi chip, not MT7610EN.

 - Fix HC5761/HC5861 WiFi LEDs
   After 5GHz is enabled, it becomes wlan0. And 2.4GHz would be wlan1.

 - Fix HC5x61 image size
   It should be 15872k (0xf80000)

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
  • Loading branch information...
dengqf6 authored and mkresin committed Dec 14, 2018
1 parent 10ad6d6 commit 47381aadd545bf1fb92159fac5c43e92749a10fe
@@ -167,15 +167,11 @@ hc5661a)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
set_wifi_led "$boardname:blue:wlan2g"
;;
hc5761)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
set_wifi_led "$boardname:blue:wlan2g"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
;;
hc5761|\
hc5861)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
set_wifi_led "$boardname:blue:wlan2g"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
;;
hg255d)
set_wifi_led "$boardname:green:wlan"
@@ -304,7 +304,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch1" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
hc5*61|\
hc5661|\
hc5861|\
y1s)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
@@ -327,6 +328,10 @@ ramips_setup_interfaces()
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
ucidef_set_interface_wan "usb0"
;;
hc5761)
ucidef_add_switch "switch0" \
"1:lan" "4:lan" "0:wan" "6@eth0"
;;
mzk-dp150n|\
vocore-8M|\
vocore-16M)
@@ -38,6 +38,18 @@
};
};

&ehci {
status = "okay";
};

&ohci {
status = "okay";
};

&pcie {
status = "okay";
};

&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
@@ -60,6 +60,14 @@
};
};

&ehci {
status = "okay";
};

&ohci {
status = "okay";
};

&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
@@ -98,6 +106,10 @@
mediatek,port4 = "gmac";
};

&pcie {
status = "okay";
};

&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
@@ -67,6 +67,7 @@
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};

partition@30000 {
@@ -78,6 +79,7 @@
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};

partition@50000 {
@@ -89,29 +91,24 @@
partition@fd0000 {
label = "hwf_config";
reg = <0xfd0000 0x10000>;
read-only;
};

bdinfo: partition@fe0000 {
label = "bdinfo";
reg = <0xfe0000 0x10000>;
read-only;
};

partition@ff0000 {
label = "backup";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};

&ehci {
status = "okay";
};

&ohci {
status = "okay";
};

&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
@@ -129,10 +126,6 @@
pinctrl-0 = <&pa_pins>;
};

&pcie {
status = "okay";
};

&pinctrl {
state_default: pinctrl0 {
gpio {
@@ -297,25 +297,25 @@ TARGET_DEVICES += gl-mt750

define Device/hc5661
DTS := HC5661
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGE_SIZE := 15872k
DEVICE_TITLE := HiWiFi HC5661
DEVICE_PACKAGES := kmod-usb2 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES := kmod-sdhci-mt7620
endef
TARGET_DEVICES += hc5661

define Device/hc5761
DTS := HC5761
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGE_SIZE := 15872k
DEVICE_TITLE := HiWiFi HC5761
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += hc5761

define Device/hc5861
DTS := HC5861
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGE_SIZE := 15872k
DEVICE_TITLE := HiWiFi HC5861
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += hc5861

0 comments on commit 47381aa

Please sign in to comment.
You can’t perform that action at this time.