diff --git a/target/linux/realtek/config-5.10 b/target/linux/realtek/config-5.10
index b3a16927d6e5d6..71028da77f78b6 100644
--- a/target/linux/realtek/config-5.10
+++ b/target/linux/realtek/config-5.10
@@ -70,7 +70,6 @@ CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_GENERIC=y
 CONFIG_GPIO_REALTEK_OTTO=y
 CONFIG_GPIO_RTL8231=y
-CONFIG_GPIO_RTL838X=y
 CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDWARE_WATCHPOINTS=y
diff --git a/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c b/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c
deleted file mode 100644
index 2009ebcce924d5..00000000000000
--- a/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/gpio/driver.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-
-/* RTL8231 registers for LED control */
-#define RTL8231_LED_FUNC0			0x0000
-#define RTL8231_GPIO_PIN_SEL(gpio)		((0x0002) + ((gpio) >> 4))
-#define RTL8231_GPIO_DIR(gpio)			((0x0005) + ((gpio) >> 4))
-#define RTL8231_GPIO_DATA(gpio)			((0x001C) + ((gpio) >> 4))
-
-struct rtl838x_gpios {
-	struct gpio_chip gc;
-	u32 id;
-	struct device *dev;
-	int irq;
-	int num_leds;
-	int min_led;
-	int leds_per_port;
-	u32 led_mode;
-	int led_glb_ctrl;
-	int led_sw_ctrl;
-	int (*led_sw_p_ctrl)(int port);
-	int (*led_sw_p_en_ctrl)(int port);
-	int (*ext_gpio_dir)(int i);
-	int (*ext_gpio_data)(int i);
-};
-
-inline int rtl838x_ext_gpio_dir(int i)
-{
-	return RTL838X_EXT_GPIO_DIR + ((i >>5) << 2);
-}
-
-inline int rtl839x_ext_gpio_dir(int i)
-{
-	return RTL839X_EXT_GPIO_DIR + ((i >>5) << 2);
-}
-
-inline int rtl838x_ext_gpio_data(int i)
-{
-	return RTL838X_EXT_GPIO_DATA + ((i >>5) << 2);
-}
-
-inline int rtl839x_ext_gpio_data(int i)
-{
-	return RTL839X_EXT_GPIO_DATA + ((i >>5) << 2);
-}
-
-inline int rtl838x_led_sw_p_ctrl(int p)
-{
-	return RTL838X_LED_SW_P_CTRL + (p << 2);
-}
-
-inline int rtl839x_led_sw_p_ctrl(int p)
-{
-	return RTL839X_LED_SW_P_CTRL + (p << 2);
-}
-
-inline int rtl838x_led_sw_p_en_ctrl(int p)
-{
-	return RTL838X_LED_SW_P_EN_CTRL + ((p / 10) << 2);
-}
-
-inline int rtl839x_led_sw_p_en_ctrl(int p)
-{
-	return RTL839X_LED_SW_P_EN_CTRL + ((p / 10) << 2);
-}
-
-extern struct mutex smi_lock;
-extern struct rtl83xx_soc_info soc_info;
-
-
-void rtl838x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	int bit;
-	struct rtl838x_gpios *gpios = gpiochip_get_data(gc);
-
-	pr_debug("rtl838x_set: %d, value: %d\n", offset, value);
-	/* Internal GPIO of the RTL8380 */
-	if (offset < 32) {
-		if (value)
-			rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DATA);
-		else
-			rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DATA);
-	}
-
-	/* LED driver for PWR and SYS */
-	if (offset >= 32 && offset < 64) {
-		bit = offset - 32;
-		if (value)
-			sw_w32_mask(0, BIT(bit), gpios->led_glb_ctrl);
-		else
-			sw_w32_mask(BIT(bit), 0, gpios->led_glb_ctrl);
-		return;
-	}
-
-	bit = (offset - 64) % 32;
-	/* First Port-LED */
-	if (offset >= 64 && offset < 96
-	   && offset >= (64 + gpios->min_led)
-	   && offset < (64 + gpios->min_led + gpios->num_leds)) {
-		if (value)
-			sw_w32_mask(7, 5, gpios->led_sw_p_ctrl(bit));
-		else
-			sw_w32_mask(7, 0, gpios->led_sw_p_ctrl(bit));
-	}
-	if (offset >= 96 && offset < 128
-	    && offset >= (96 + gpios->min_led)
-	    && offset < (96 + gpios->min_led + gpios->num_leds)) {
-		if (value)
-			sw_w32_mask(7 << 3, 5 << 3, gpios->led_sw_p_ctrl(bit));
-		else
-			sw_w32_mask(7 << 3, 0, gpios->led_sw_p_ctrl(bit));
-	}
-	if (offset >= 128 && offset < 160
-	    && offset >= (128 + gpios->min_led)
-	    && offset < (128 + gpios->min_led + gpios->num_leds)) {
-		if (value)
-			sw_w32_mask(7 << 6, 5 << 6, gpios->led_sw_p_ctrl(bit));
-		else
-			sw_w32_mask(7 << 6, 0, gpios->led_sw_p_ctrl(bit));
-	}
-	__asm__ volatile ("sync");
-}
-
-void rtl930x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	pr_debug("rtl838x_set: %d, value: %d\n", offset, value);
-	/* Internal GPIO of the RTL9300 */
-	if (value)
-		rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DAT);
-	else
-		rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DAT);
-}
-
-static int rtl838x_direction_input(struct gpio_chip *gc, unsigned int offset)
-{
-	pr_debug("%s: %d\n", __func__, offset);
-
-	if (offset < 32) {
-		rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DIR);
-		return 0;
-	}
-
-	/* Internal LED driver does not support input */
-	return -ENOTSUPP;
-}
-
-static int rtl930x_direction_input(struct gpio_chip *gc, unsigned int offset)
-{
-	pr_debug("%s: %d\n", __func__, offset);
-
-	rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DIR);
-	return 0;
-}
-
-static int rtl838x_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	pr_debug("%s: %d\n", __func__, offset);
-	if (offset < 32)
-		rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DIR);
-	rtl930x_gpio_set(gc, offset, value);
-
-	/* LED for PWR and SYS driver is direction output by default */
-	return 0;
-}
-
-static int rtl930x_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	pr_debug("%s: %d\n", __func__, offset);
-	rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DIR);
-	rtl930x_gpio_set(gc, offset, value);
-
-	/* LED for PWR and SYS driver is direction output by default */
-	return 0;
-}
-
-static int rtl838x_get_direction(struct gpio_chip *gc, unsigned int offset)
-{
-	u32 v = 0;
-
-	pr_debug("%s: %d\n", __func__, offset);
-	if (offset < 32) {
-		v = rtl83xx_r32(RTL838X_GPIO_PABC_DIR);
-		if (v & BIT(offset))
-			return 0;
-		return 1;
-	}
-
-	/* LED driver for PWR and SYS is direction output by default */
-	if (offset >= 32 && offset < 64)
-		return 0;
-
-	return 0;
-}
-
-static int rtl930x_get_direction(struct gpio_chip *gc, unsigned int offset)
-{
-	u32 v = 0;
-
-	v = rtl83xx_r32(RTL930X_GPIO_PABCD_DIR);
-	if (v & BIT(offset))
-		return 0;
-	return 1;
-}
-
-static int rtl838x_gpio_get(struct gpio_chip *gc, unsigned int offset)
-{
-	u32 v;
-	struct rtl838x_gpios *gpios = gpiochip_get_data(gc);
-
-	pr_debug("%s: %d\n", __func__, offset);
-
-	/* Internal GPIO of the RTL8380 */
-	if (offset < 32) {
-		v = rtl83xx_r32(RTL838X_GPIO_PABC_DATA);
-		if (v & BIT(offset))
-			return 1;
-		return 0;
-	}
-
-	/* LED driver for PWR and SYS */
-	if (offset >= 32 && offset < 64) {
-		v = sw_r32(gpios->led_glb_ctrl);
-		if (v & BIT(offset-32))
-			return 1;
-		return 0;
-	}
-
-	return 0;
-}
-
-static int rtl930x_gpio_get(struct gpio_chip *gc, unsigned int offset)
-{
-	u32 v = rtl83xx_r32(RTL930X_GPIO_PABCD_DAT);
-	if (v & BIT(offset))
-		return 1;
-	return 0;
-}
-
-void rtl8380_led_test(struct rtl838x_gpios *gpios, u32 mask)
-{
-	int i;
-	u32 led_gbl = sw_r32(gpios->led_glb_ctrl);
-	u32 mode_sel, led_p_en;
-
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		mode_sel = sw_r32(RTL838X_LED_MODE_SEL);
-		led_p_en = sw_r32(RTL838X_LED_P_EN_CTRL);
-	}
-
-	/* 2 Leds for ports 0-23 and 24-27, 3 would be 0x7 */
-	sw_w32_mask(0x3f, 0x3 | (0x3 << 3), gpios->led_glb_ctrl);
-
-	if(soc_info.family == RTL8380_FAMILY_ID) {
-		/* Enable all leds */
-		sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL);
-	}
-	/* Enable software control of all leds */
-	sw_w32(0xFFFFFFF, gpios->led_sw_ctrl);
-	sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0));
-	sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10));
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
-
-	for (i = 0; i < 28; i++) {
-		if (mask & BIT(i))
-			sw_w32(5 | (5 << 3) | (5 << 6), gpios->led_sw_p_ctrl(i));
-	}
-	msleep(3000);
-
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		sw_w32(led_p_en, RTL838X_LED_P_EN_CTRL);
-	/* Disable software control of all leds */
-	sw_w32(0x0000000, gpios->led_sw_ctrl);
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0));
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10));
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
-
-	sw_w32(led_gbl, gpios->led_glb_ctrl);
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		sw_w32(mode_sel, RTL838X_LED_MODE_SEL);
-}
-
-void take_port_leds(struct rtl838x_gpios *gpios)
-{
-	int leds_per_port = gpios->leds_per_port;
-	int mode = gpios->led_mode;
-
-	pr_info("%s, %d, %x\n", __func__, leds_per_port, mode);
-	pr_debug("Bootloader settings: %x %x %x\n",
-		sw_r32(gpios->led_sw_p_en_ctrl(0)),
-		sw_r32(gpios->led_sw_p_en_ctrl(10)),
-		sw_r32(gpios->led_sw_p_en_ctrl(20))
-	);
-
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		pr_debug("led glb: %x, sel %x\n",
-			sw_r32(gpios->led_glb_ctrl), sw_r32(RTL838X_LED_MODE_SEL));
-		pr_debug("RTL838X_LED_P_EN_CTRL: %x", sw_r32(RTL838X_LED_P_EN_CTRL));
-		pr_debug("RTL838X_LED_MODE_CTRL: %x", sw_r32(RTL838X_LED_MODE_CTRL));
-		sw_w32_mask(3, 0, RTL838X_LED_MODE_SEL);
-		sw_w32(mode, RTL838X_LED_MODE_CTRL);
-	}
-
-	/* Enable software control of all leds */
-	sw_w32(0xFFFFFFF, gpios->led_sw_ctrl);
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL);
-
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0));
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10));
-	sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
-
-	sw_w32_mask(0x3f, 0, gpios->led_glb_ctrl);
-	switch (leds_per_port) {
-	case 3:
-		sw_w32_mask(0, 0x7 | (0x7 << 3), gpios->led_glb_ctrl);
-		sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(20));
-		/* FALLTHRU */
-	case 2:
-		sw_w32_mask(0, 0x3 | (0x3 << 3), gpios->led_glb_ctrl);
-		sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10));
-		/* FALLTHRU */
-	case 1:
-		sw_w32_mask(0, 0x1 | (0x1 << 3), gpios->led_glb_ctrl);
-		sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0));
-		break;
-	default:
-		pr_err("No LEDS configured for software control\n");
-	}
-}
-
-static const struct of_device_id rtl838x_gpio_of_match[] = {
-	{ .compatible = "realtek,rtl838x-gpio" },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, rtl838x_gpio_of_match);
-
-static int rtl838x_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct rtl838x_gpios *gpios;
-	int err;
-
-	pr_info("Probing RTL838X GPIOs for %08x\n", soc_info.id);
-
-	if (!np) {
-		dev_err(&pdev->dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
-	if (!gpios)
-		return -ENOMEM;
-
-	gpios->id = soc_info.id;
-
-	switch (gpios->id) {
-	case 0x8332:
-		pr_debug("Found RTL8332M GPIO\n");
-		break;
-	case 0x8380:
-		pr_debug("Found RTL8380M GPIO\n");
-		break;
-	case 0x8381:
-		pr_debug("Found RTL8381M GPIO\n");
-		break;
-	case 0x8382:
-		pr_debug("Found RTL8382M GPIO\n");
-		break;
-	case 0x8391:
-		pr_debug("Found RTL8391 GPIO\n");
-		break;
-	case 0x8393:
-		pr_debug("Found RTL8393 GPIO\n");
-		break;
-	case 0x9302:
-		pr_info("Found RTL9302 GPIO\n");
-		break;
-	default:
-		pr_err("Unknown GPIO chip id (%04x)\n", gpios->id);
-		return -ENODEV;
-	}
-
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		gpios->led_glb_ctrl = RTL838X_LED_GLB_CTRL;
-		gpios->led_sw_ctrl = RTL838X_LED_SW_CTRL;
-		gpios->led_sw_p_ctrl = rtl838x_led_sw_p_ctrl;
-		gpios->led_sw_p_en_ctrl = rtl838x_led_sw_p_en_ctrl;
-		gpios->ext_gpio_dir = rtl838x_ext_gpio_dir;
-		gpios->ext_gpio_data = rtl838x_ext_gpio_data;
-		gpios->irq = 31;
-	}
-
-	if (soc_info.family == RTL8390_FAMILY_ID) {
-		gpios->led_glb_ctrl = RTL839X_LED_GLB_CTRL;
-		gpios->led_sw_ctrl = RTL839X_LED_SW_CTRL;
-		gpios->led_sw_p_ctrl = rtl839x_led_sw_p_ctrl;
-		gpios->led_sw_p_en_ctrl = rtl839x_led_sw_p_en_ctrl;
-		gpios->ext_gpio_dir = rtl839x_ext_gpio_dir;
-		gpios->ext_gpio_data = rtl839x_ext_gpio_data;
-		gpios->irq = 31;
-	}
-
-	if (soc_info.family == RTL9300_FAMILY_ID) {
-		gpios->irq = 13;
-	}
-
-	gpios->gc.label = "rtl838x";
-	gpios->gc.parent = dev;
-	gpios->gc.owner = THIS_MODULE;
-	gpios->gc.can_sleep = true;
-	gpios->dev = dev;
-	gpios->gc.base = 0;
-
-	if (soc_info.family != RTL9300_FAMILY_ID) {
-		/* 0-31: internal
-		* 32-63, LED control register
-		* 64-95: PORT-LED 0
-		* 96-127: PORT-LED 1
-		* 128-159: PORT-LED 2
-		*/
-		gpios->gc.ngpio = 160;
-
-		gpios->gc.direction_input = rtl838x_direction_input;
-		gpios->gc.direction_output = rtl838x_direction_output;
-		gpios->gc.set = rtl838x_gpio_set;
-		gpios->gc.get = rtl838x_gpio_get;
-		gpios->gc.get_direction = rtl838x_get_direction;
-	} else {
-		gpios->gc.ngpio = 32;
-
-		gpios->gc.direction_input = rtl930x_direction_input;
-		gpios->gc.direction_output = rtl930x_direction_output;
-		gpios->gc.set = rtl930x_gpio_set;
-		gpios->gc.get = rtl930x_gpio_get;
-		gpios->gc.get_direction = rtl930x_get_direction;
-	}
-
-	if (of_property_read_bool(np, "take-port-leds")) {
-	pr_info("A1\n");
-		if (of_property_read_u32(np, "leds-per-port", &gpios->leds_per_port))
-			gpios->leds_per_port = 2;
-		if (of_property_read_u32(np, "led-mode", &gpios->led_mode))
-			gpios->led_mode = (0x1ea << 15) | 0x1ea;
-		if (of_property_read_u32(np, "num-leds", &gpios->num_leds))
-			gpios->num_leds = 32;
-		if (of_property_read_u32(np, "min-led", &gpios->min_led))
-			gpios->min_led = 0;
-		take_port_leds(gpios);
-	}
-
-	err = devm_gpiochip_add_data(dev, &gpios->gc, gpios);
-
-	return err;
-}
-
-static struct platform_driver rtl838x_gpio_driver = {
-	.driver = {
-		.name = "rtl838x-gpio",
-		.of_match_table	= rtl838x_gpio_of_match,
-	},
-	.probe = rtl838x_gpio_probe,
-};
-
-module_platform_driver(rtl838x_gpio_driver);
-
-MODULE_DESCRIPTION("Realtek RTL838X GPIO API support");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch b/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch
deleted file mode 100644
index 1ea8add32bf945..00000000000000
--- a/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -514,6 +514,12 @@ config GPIO_RTL8231
- 	help
- 	  Say yes here to support Realtek RTL8231 GPIO expansion chips.
- 
-+config GPIO_RTL838X
-+	tristate "RTL838X GPIO"
-+	depends on RTL838X
-+	help
-+	Say yes here to support RTL838X GPIO on RTL93xx SoCs.
-+
- config GPIO_SAMA5D2_PIOBU
- 	tristate "SAMA5D2 PIOBU GPIO support"
- 	depends on MFD_SYSCON
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc3
- obj-$(CONFIG_GPIO_REALTEK_OTTO)		+= gpio-realtek-otto.o
- obj-$(CONFIG_GPIO_REG)			+= gpio-reg.o
- obj-$(CONFIG_GPIO_RTL8231)		+= gpio-rtl8231.o
-+obj-$(CONFIG_GPIO_RTL838X)		+= gpio-rtl838x.o
- obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
- obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o
- obj-$(CONFIG_GPIO_SCH311X)		+= gpio-sch311x.o