Skip to content
Permalink
Browse files

ath79: add support for TP-Link Archer C2 V3 (AC900)

This commit adds support for the TP-link Archer C2 V3 (AC900).

Specifications:

 - CPU: QCA9563 750Mhz
 - Ram: 64MB (DDR2)
 - Flash: 8MB (SPI NOR)
 - Ethernet: 5x 10/100/1000
 - Wifi: QCA9563 bgn + QCA9887 an+ac
 - 9x Leds, 2x buttons

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin
via the router Web interface and flash as normal firmware update.

Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reorder entries, fix trailing whitespace in dts, add firmware partition
 compatible string, remove led default off states, use default on state
 for system led, reuse tplink-safeloader-uimage image build recipe, squash
 with dynamic partitioning commit, reword commit message, add
 installation instructions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
  • Loading branch information...
x-logLT authored and jow- committed Oct 28, 2018
1 parent 30f48fb commit 9c01273e5e7b3929ad46d974685ec29de207a8de
@@ -81,6 +81,14 @@ tplink,archer-c7-v5)
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
@@ -98,13 +106,6 @@ tplink,tl-mr3020-v1|\
tplink,tl-mr3040-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-wr1043nd-v4)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\
@@ -74,6 +74,7 @@ ath79_setup_interfaces()
dlink,dir-825-c1|\
dlink,dir-835-a1|\
dlink,dir-859-a1|\
tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
@@ -126,6 +126,10 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
tplink,archer-c2-v3)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
tplink,archer-c7-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
@@ -0,0 +1,185 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
compatible = "tplink,archer-c2-v3", "qca,qca9563";
model = "TP-Link Archer C2 Version 3";

chosen {
bootargs = "console=ttyS0,115200n8";
};

aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};

gpio_leds: leds {
compatible = "gpio-leds";

system: system {
label = "tp-link:green:system";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};

wifi2g {
label = "tp-link:green:wifi2g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};

wifi5g {
label = "tp-link:green:wifi5g";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};

wifi_wps {
label = "tp-link:green:wps";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};

wan {
label = "tp-link:green:wan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};

wan_fail {
label = "tp-link:orange:wan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};

lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};

lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};

lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};

lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};

keys {
compatible = "gpio-keys";

reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};

wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};

&uart {
status = "okay";
};

&spi {
status = "okay";
num-cs = <1>;

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "factory-uboot";
reg = <0x000000 0x020000>;
read-only;
};

partition@20000 {
label = "uboot";
reg = <0x020000 0x10000>;
};

partition@30000 {
label = "firmware";
reg = <0x030000 0x7A0000>;
compatible = "denx,uimage";
};

info: partition@7e0000 {
label = "product-info";
reg = <0x7e0000 0x010000>;
read-only;
};

art: partition@7f0000 {
label = "ART";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};

&gpio {
status = "okay";
};

&mdio0 {
status = "okay";

phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";

qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};

&pcie {
status = "okay";
};

&eth0 {
status = "okay";

mtd-mac-address = <&info 0x8>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};

&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};
@@ -12,6 +12,16 @@ define Device/tplink_archer-a7-v5
endef
TARGET_DEVICES += tplink_archer-a7-v5

define Device/tplink_archer-c2-v3
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-LINK Archer C2 v3
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
TPLINK_BOARD_ID := ARCHER-C2-V3
endef
TARGET_DEVICES += tplink_archer-c2-v3

define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
@@ -397,6 +397,44 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},

/** Firmware layout for the C2v3 */
{
.id = "ARCHER-C2-V3",
.support_list =
"SupportList:\n"
"{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
"{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
"{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
.support_trail = '\x00',
.soft_ver = "soft_ver:3.0.1\n",

/** We're using a dynamic kernel/rootfs split here */

.partitions = {
{"factory-boot", 0x00000, 0x20000},
{"fs-uboot", 0x20000, 0x10000},
{"firmware", 0x30000, 0x7a0000},
{"user-config", 0x7d0000, 0x04000},
{"default-mac", 0x7e0000, 0x00100},
{"device-id", 0x7e0100, 0x00100},
{"extra-para", 0x7e0200, 0x00100},
{"pin", 0x7e0300, 0x00100},
{"support-list", 0x7e0400, 0x00400},
{"soft-version", 0x7e0800, 0x00400},
{"product-info", 0x7e0c00, 0x01400},
{"partition-table", 0x7e2000, 0x01000},
{"profile", 0x7e3000, 0x01000},
{"default-config", 0x7e4000, 0x04000},
{"merge-config", 0x7ec000, 0x02000},
{"qos-db", 0x7ee000, 0x02000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},

.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},

/** Firmware layout for the C25v1 */
{
.id = "ARCHER-C25-V1",

0 comments on commit 9c01273

Please sign in to comment.
You can’t perform that action at this time.