Skip to content
Permalink
Browse files

ath79: Add support for TP-Link WR810N

Device specifications given in b23b0fb

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
  • Loading branch information...
p-wassi authored and mkresin committed Dec 28, 2018
1 parent c2ecec0 commit cdbf2de77768dfde560b4ea663b4eac0d3a5a581
@@ -91,7 +91,9 @@ ath79_setup_interfaces()
;;
glinet,ar300m|\
glinet,gl-ar150|\
glinet,gl-x750)
glinet,gl-x750|\
tplink,tl-wr810n-v1|\
tplink,tl-wr810n-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
glinet,ar750s)
@@ -0,0 +1,37 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca953x_tplink_tl-wr810n.dtsi"

/ {
compatible = "tplink,tl-wr810n-v1", "qca,qca9531";
model = "TP-Link TL-WR810N v1";

reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};

&usb0 {
#address-cells = <1>;
#size-cells = <0>;
vbus-supply = <&reg_usb_vbus>;
status = "okay";

hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

&usb_phy {
status = "okay";
};
@@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca953x_tplink_tl-wr810n.dtsi"

/ {
compatible = "tplink,tl-wr810n-v2", "qca,qca9533";
model = "TP-Link TL-WR810N v2";
};
@@ -0,0 +1,113 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca953x.dtsi"

/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};

aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};

gpio_leds: leds {
compatible = "gpio-leds";

led_system: system {
label = "tp-link:blue:system";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};

keys {
compatible = "gpio-keys";

reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};

switch_b0 {
label = "switch_b0";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};

switch_b1 {
label = "switch_b1";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
};

&uart {
status = "okay";
};

&spi {
status = "okay";
num-cs = <1>;

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};

partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7d0000>;
};

art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};

&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
};

&eth0 {
status = "okay";
phy-handle = <&swphy4>;

mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};

&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};
@@ -123,6 +123,23 @@ define Device/tplink_tl-wr1043nd-v1
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v1

define Device/tplink_tl-wr810n-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9531
DEVICE_TITLE := TP-LINK TL-WR810N v1
TPLINK_HWID := 0x8100001
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr810n-v1

define Device/tplink_tl-wr810n-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9533
DEVICE_TITLE := TP-LINK TL-WR810N v2
TPLINK_HWID := 0x8100002
endef
TARGET_DEVICES += tplink_tl-wr810n-v2

define Device/tplink_tl-wr842n-v1
$(Device/tplink-8m)
ATH_SOC := ar7241

0 comments on commit cdbf2de

Please sign in to comment.
You can’t perform that action at this time.