Skip to content
Permalink
Browse files

ramips: rework network settings for HC5861

dts: disable port4 and leave it ephy mode because it connect to nothing
switch port5 connected to GE port we use it as wan port

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
  • Loading branch information...
ptpt52 authored and chunkeey committed Feb 22, 2019
1 parent fe591f2 commit e15bda603a9aad3564c46071c07b299703ec0f71
Showing with 14 additions and 18 deletions.
  1. +4 −1 target/linux/ramips/base-files/etc/board.d/02_network
  2. +10 −17 target/linux/ramips/dts/HC5861.dts
@@ -315,11 +315,14 @@ ramips_setup_interfaces()
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
hc5661|\
hc5861|\
y1s)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
;;
hc5861)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "5:wan" "6@eth0"
;;
iodata,wn-ac1167gr)
ucidef_add_switch "switch1" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
@@ -72,15 +72,9 @@
status = "okay";
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
mediatek,portmap = "wllll";

port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};

port@5 {
status = "okay";
phy-handle = <&phy5>;
@@ -90,30 +84,29 @@
mdio-bus {
status = "okay";

phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};

phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};

&gsw {
mediatek,port4 = "gmac";
};

&pcie {
status = "okay";
};

&pcie0 {
mt76@0,0 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};

&state_default {
gpio {
ralink,group = "uartf", "wled", "rgmii2", "ephy";
ralink,function = "gpio";
};
};

0 comments on commit e15bda6

Please sign in to comment.
You can’t perform that action at this time.