Skip to content
Permalink
Browse files

ramips: add support for Belkin F9K1109v1

Device specification:
- SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz
- RAM: 64Mb
- Flash: 8MB (SPI-NOR)
- Ethernet: 10/100/1000 Mbps
- WLAN
	Wireless 1: SoC-integrated : 2.4/5 GHz
	Wireless 2: 2.4 GHz RT3092L
- LED: 2x USB, WAN, LAN
- Key: WPS, reset
- Serial: 4-pin header, (57600,8,N,1), 3.3V TTL,
	GND, RX, TX, V - J12 marking on board
- USB ports: 2 x USB 2.0

Flashing instructions:

Option 1 (from bootloader web)
- Hold reset button on the back of router when plugging
  in power (for at-least 10 seconds after plugged in)
- Connect to a Lan port
- Set computer IP to 10.10.10.3
- Go to http://10.10.10.123 in a web browser
- Click the Browse... Button and select the
   *squashfs.sysupgrade.bin file then click APPLY

Option 2 (from the stock admin web)
- Go to firmware upgrade
- Upload the **factory** image *initramfs.bin first
- Boot into openwrt
- From Luci web in openwrt upload the *squashfs.sysupgrade.bin

Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added v1 to the compatible identifier, added pciid for
the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi
to prepare for a possible F9K1103 patch]
  • Loading branch information...
kapieyow authored and chunkeey committed Feb 3, 2019
1 parent 6c558ba commit f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3
@@ -60,6 +60,10 @@ bdcom,wap2100-sk|\
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
belkin,f9k1109v1)
set_usb_led "$boardname:green:usb1"
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
;;
broadway)
set_wifi_led "$boardname:red:wps_active"
;;
@@ -199,6 +199,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
;;
belkin,f9k1109v1|\
rt-n15|\
wl-351)
ucidef_add_switch "switch0" \
@@ -483,6 +484,10 @@ ramips_setup_macs()
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
belkin,f9k1109v1)
wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
;;
br-6475nd)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(mtd_get_mac_binary devdata 7)
@@ -0,0 +1,71 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include "F9K110x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
compatible = "belkin,f9k1109v1", "ralink,rt3883-soc";
model = "Belkin F9K1109 Version 1.0";

aliases {
led-boot = &led_status_amber;
led-failsafe = &led_status_amber;
led-running = &led_status_blue;
led-upgrade = &led_status_amber;
};

leds {
compatible = "gpio-leds";

led_status_amber: internet_amber {
label = "f9k1109v1:amber:internet";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};

led_status_blue: internet_blue {
label = "f9k1109v1:blue:internet";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};

usb1 {
label = "f9k1109v1:green:usb1";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};

usb2 {
label = "f9k1109v1:green:usb2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};

wps_amber {
label = "f9k1109v1:amber:wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};

wps_blue {
label = "f9k1109v1:blue:wps";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};

};

keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;

reset {
label = "reset";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};

wps {
label = "wps";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
@@ -0,0 +1,101 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "rt3883.dtsi"

/ {
compatible = "ralink,rt3883-soc";
};

&gpio1 {
status = "okay";
};

&spi0 {
status = "okay";

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};

partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};

factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};

partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7a0000>;
};

partition@7f0000 {
label = "user-cfg";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};

&ethernet {
port@0 {
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
};

&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};

&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
};

&pci {
status = "okay";
};

&pci1 {
status = "okay";

wifi@1,0 {
compatible = "pci1814,3091";
reg = <0x10000 0 0 0 0>;
ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};

&ehci {
status = "okay";
};

&ohci {
status = "okay";
};
@@ -41,6 +41,18 @@ endef
TARGET_DEVICES += dir-645


define Device/belkin_f9k1109v1
DTS := F9K1109V1
BLOCKSIZE := 64k
DEVICE_TITLE := Belkin F9K1109 Version 1.0
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 swconfig
IMAGE_SIZE := 7224k
KERNEL := kernel-bin | patch-dtb | lzma -d16 | uImage lzma
# Stock firmware checks for this uImage image name during upload.
UIMAGE_NAME := N750F9K1103VB
endef
TARGET_DEVICES += belkin_f9k1109v1

define Device/hpm
DTS := HPM
BLOCKSIZE := 64k

0 comments on commit f2c8353

Please sign in to comment.
You can’t perform that action at this time.