Upgrade Plug to Plug plus

domke edited this page Jul 25, 2013 · 3 revisions

WARNING: POSSIBILITY OF INJURY! Please only do the following modifications, if you know have the required skills to work with voltages up to 1000V! If you are unsure what you are doing, you might harm yourself or others!

ACHTUNG: VERLETZUNGSGEFAHR! Die nachfolgenden Informationen richten sich ausschließlich an Personen, die für Arbeiten an Niederspannung(bis 1000V) ausgebildet sind!


The difference between a Plug and a Plug+ is the ability to measure power. Both models are based on the same pcb. The Plug+ pcb is populated with some more components. It should be possible, to upgrade a Plug to a Plug+ version by soldering on these additional parts.

Here's a list of what is needed: list of needed parts The required parts are highlighted in yellow.

Here's where the additional parts need to go: PCB The required parts are highlighted in yellow.

Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.