From 5910076641ff06a5b6a168bba88e32ca9738ca7d Mon Sep 17 00:00:00 2001 From: Joseph Julicher Date: Wed, 8 May 2024 16:02:38 -0700 Subject: [PATCH] format changes from PR check --- .../template_configuration/FreeRTOSConfig.h | 194 +++++++++--------- 1 file changed, 97 insertions(+), 97 deletions(-) diff --git a/examples/template_configuration/FreeRTOSConfig.h b/examples/template_configuration/FreeRTOSConfig.h index f494fae218..c35630bd10 100644 --- a/examples/template_configuration/FreeRTOSConfig.h +++ b/examples/template_configuration/FreeRTOSConfig.h @@ -53,7 +53,7 @@ * settings. Your application will certainly need a different value so set this * correctly. This is very often, but not always, equal to the main system clock * frequency. */ -#define configCPU_CLOCK_HZ ( ( unsigned long ) 20000000 ) +#define configCPU_CLOCK_HZ ( ( unsigned long ) 20000000 ) /* configSYSTICK_CLOCK_HZ is an optional parameter for ARM Cortex-M ports only. * @@ -77,19 +77,19 @@ /* configTICK_RATE_HZ sets frequency of the tick interrupt in Hz, normally * calculated from the configCPU_CLOCK_HZ value. */ -#define configTICK_RATE_HZ 100 +#define configTICK_RATE_HZ 100 /* Set configUSE_PREEMPTION to 1 to use pre-emptive scheduling. Set * configUSE_PREEMPTION to 0 to use co-operative scheduling. * See https://www.freertos.org/single-core-amp-smp-rtos-scheduling.html. */ -#define configUSE_PREEMPTION 1 +#define configUSE_PREEMPTION 1 /* Set configUSE_TIME_SLICING to 1 to have the scheduler switch between Ready * state tasks of equal priority on every tick interrupt. Set * configUSE_TIME_SLICING to 0 to prevent the scheduler switching between Ready * state tasks just because there was a tick interrupt. See * https://freertos.org/single-core-amp-smp-rtos-scheduling.html. */ -#define configUSE_TIME_SLICING 0 +#define configUSE_TIME_SLICING 0 /* Set configUSE_PORT_OPTIMISED_TASK_SELECTION to 1 to select the next task to * run using an algorithm optimised to the instruction set of the target @@ -97,29 +97,29 @@ * 0 to select the next task to run using a generic C algorithm that works for * all FreeRTOS ports. Not all FreeRTOS ports have this option. Defaults to 0 * if left undefined. */ -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 /* Set configUSE_TICKLESS_IDLE to 1 to use the low power tickless mode. Set to * 0 to keep the tick interrupt running at all times. Not all FreeRTOS ports * support tickless mode. See * https://www.freertos.org/low-power-tickless-rtos.html Defaults to 0 if left * undefined. */ -#define configUSE_TICKLESS_IDLE 0 +#define configUSE_TICKLESS_IDLE 0 /* configMAX_PRIORITIES Sets the number of available task priorities. Tasks can * be assigned priorities of 0 to (configMAX_PRIORITIES - 1). Zero is the * lowest priority. */ -#define configMAX_PRIORITIES 5 +#define configMAX_PRIORITIES 5 /* configMINIMAL_STACK_SIZE defines the size of the stack used by the Idle task * (in words, not in bytes!). The kernel does not use this constant for any * other purpose. Demo applications use the constant to make the demos somewhat * portable across hardware architectures. */ -#define configMINIMAL_STACK_SIZE 128 +#define configMINIMAL_STACK_SIZE 128 /* configMAX_TASK_NAME_LEN sets the maximum length (in characters) of a task's * human readable name. Includes the NULL terminator. */ -#define configMAX_TASK_NAME_LEN 16 +#define configMAX_TASK_NAME_LEN 16 /* Time is measured in 'ticks' - which is the number of times the tick interrupt * has executed since the RTOS kernel was started. @@ -136,68 +136,68 @@ * * Defining configTICK_TYPE_WIDTH_IN_BITS as TICK_TYPE_WIDTH_64_BITS causes * TickType_t to be defined (typedef'ed) as an unsigned 64-bit type. */ -#define configTICK_TYPE_WIDTH_IN_BITS TICK_TYPE_WIDTH_64_BITS +#define configTICK_TYPE_WIDTH_IN_BITS TICK_TYPE_WIDTH_64_BITS /* Set configIDLE_SHOULD_YIELD to 1 to have the Idle task yield to an * application task if there is an Idle priority (priority 0) application task * that can run. Set to 0 to have the Idle task use all of its timeslice. * Default to 1 if left undefined. */ -#define configIDLE_SHOULD_YIELD 1 +#define configIDLE_SHOULD_YIELD 1 /* Each task has an array of task notifications. * configTASK_NOTIFICATION_ARRAY_ENTRIES sets the number of indexes in the * array. See https://www.freertos.org/RTOS-task-notifications.html Defaults to * 1 if left undefined. */ -#define configTASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define configTASK_NOTIFICATION_ARRAY_ENTRIES 1 /* configQUEUE_REGISTRY_SIZE sets the maximum number of queues and semaphores * that can be referenced from the queue registry. Only required when using a * kernel aware debugger. Defaults to 0 if left undefined. */ -#define configQUEUE_REGISTRY_SIZE 0 +#define configQUEUE_REGISTRY_SIZE 0 /* Set configENABLE_BACKWARD_COMPATIBILITY to 1 to map function names and * datatypes from old version of FreeRTOS to their latest equivalent. Defaults * to 1 if left undefined. */ -#define configENABLE_BACKWARD_COMPATIBILITY 0 +#define configENABLE_BACKWARD_COMPATIBILITY 0 /* Each task has its own array of pointers that can be used as thread local * storage. configNUM_THREAD_LOCAL_STORAGE_POINTERS set the number of indexes * in the array. See * https://www.freertos.org/thread-local-storage-pointers.html Defaults to 0 if * left undefined. */ -#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 +#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 /* When configUSE_MINI_LIST_ITEM is set to 0, MiniListItem_t and ListItem_t are * both the same. When configUSE_MINI_LIST_ITEM is set to 1, MiniListItem_t * contains 3 fewer fields than ListItem_t which saves some RAM at the cost of * violating strict aliasing rules which some compilers depend on for * optimization. Defaults to 1 if left undefined. */ -#define configUSE_MINI_LIST_ITEM 1 +#define configUSE_MINI_LIST_ITEM 1 /* Sets the type used by the parameter to xTaskCreate() that specifies the stack * size of the task being created. The same type is used to return information * about stack usage in various other API calls. Defaults to size_t if left * undefined. */ -#define configSTACK_DEPTH_TYPE size_t +#define configSTACK_DEPTH_TYPE size_t /* configMESSAGE_BUFFER_LENGTH_TYPE sets the type used to store the length of * each message written to a FreeRTOS message buffer (the length is also written * to the message buffer. Defaults to size_t if left undefined - but that may * waste space if messages never go above a length that could be held in a * uint8_t. */ -#define configMESSAGE_BUFFER_LENGTH_TYPE size_t +#define configMESSAGE_BUFFER_LENGTH_TYPE size_t /* If configHEAP_CLEAR_MEMORY_ON_FREE is set to 1, then blocks of memory * allocated using pvPortMalloc() will be cleared (i.e. set to zero) when freed * using vPortFree(). Defaults to 0 if left undefined. */ -#define configHEAP_CLEAR_MEMORY_ON_FREE 1 +#define configHEAP_CLEAR_MEMORY_ON_FREE 1 /* vTaskList and vTaskGetRunTimeStats APIs take a buffer as a parameter and * assume that the length of the buffer is configSTATS_BUFFER_MAX_LENGTH. * Defaults to 0xFFFF if left undefined. New applications are recommended to use * vTaskListTasks and vTaskGetRunTimeStatistics APIs instead and supply the * length of the buffer explicitly to avoid memory corruption. */ -#define configSTATS_BUFFER_MAX_LENGTH 0xFFFF +#define configSTATS_BUFFER_MAX_LENGTH 0xFFFF /* Set configUSE_NEWLIB_REENTRANT to 1 to have a newlib reent structure * allocated for each task. Set to 0 to not support newlib reent structures. @@ -209,7 +209,7 @@ * provide system-wide implementations of the necessary stubs. Note that (at the * time of writing) the current newlib design implements a system-wide malloc() * that must be provided with locks. */ -#define configUSE_NEWLIB_REENTRANT 0 +#define configUSE_NEWLIB_REENTRANT 0 /******************************************************************************/ /* Software timer related definitions. ****************************************/ @@ -220,27 +220,27 @@ * FreeRTOS/source/timers.c source file must be included in the build if * configUSE_TIMERS is set to 1. Default to 0 if left undefined. See * https://www.freertos.org/RTOS-software-timer.html. */ -#define configUSE_TIMERS 1 +#define configUSE_TIMERS 1 /* configTIMER_TASK_PRIORITY sets the priority used by the timer task. Only * used if configUSE_TIMERS is set to 1. The timer task is a standard FreeRTOS * task, so its priority is set like any other task. See * https://www.freertos.org/RTOS-software-timer-service-daemon-task.html Only * used if configUSE_TIMERS is set to 1. */ -#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) /* configTIMER_TASK_STACK_DEPTH sets the size of the stack allocated to the * timer task (in words, not in bytes!). The timer task is a standard FreeRTOS * task. See * https://www.freertos.org/RTOS-software-timer-service-daemon-task.html Only * used if configUSE_TIMERS is set to 1. */ -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE /* configTIMER_QUEUE_LENGTH sets the length of the queue (the number of discrete * items the queue can hold) used to send commands to the timer task. See * https://www.freertos.org/RTOS-software-timer-service-daemon-task.html Only * used if configUSE_TIMERS is set to 1. */ -#define configTIMER_QUEUE_LENGTH 10 +#define configTIMER_QUEUE_LENGTH 10 /******************************************************************************/ /* Event Group related definitions. *******************************************/ @@ -251,7 +251,7 @@ * FreeRTOS/source/event_groups.c source file must be included in the build if * configUSE_EVENT_GROUPS is set to 1. Defaults to 1 if left undefined. */ -#define configUSE_EVENT_GROUPS 1 +#define configUSE_EVENT_GROUPS 1 /******************************************************************************/ /* Stream Buffer related definitions. *****************************************/ @@ -262,7 +262,7 @@ * FreeRTOS/source/stream_buffer.c source file must be included in the build if * configUSE_STREAM_BUFFERS is set to 1. Defaults to 1 if left undefined. */ -#define configUSE_STREAM_BUFFERS 1 +#define configUSE_STREAM_BUFFERS 1 /******************************************************************************/ /* Memory allocation related definitions. *************************************/ @@ -273,7 +273,7 @@ * memory in the build. Set to 0 to exclude the ability to create statically * allocated objects from the build. Defaults to 0 if left undefined. See * https://www.freertos.org/Static_Vs_Dynamic_Memory_Allocation.html. */ -#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 /* Set configSUPPORT_DYNAMIC_ALLOCATION to 1 to include FreeRTOS API functions * that create FreeRTOS objects (tasks, queues, etc.) using dynamically @@ -281,18 +281,18 @@ * dynamically allocated objects from the build. Defaults to 1 if left * undefined. See * https://www.freertos.org/Static_Vs_Dynamic_Memory_Allocation.html. */ -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 /* Sets the total size of the FreeRTOS heap, in bytes, when heap_1.c, heap_2.c * or heap_4.c are included in the build. This value is defaulted to 4096 bytes * but it must be tailored to each application. Note the heap will appear in * the .bss section. See https://www.freertos.org/a00111.html. */ -#define configTOTAL_HEAP_SIZE 4096 +#define configTOTAL_HEAP_SIZE 4096 /* Set configAPPLICATION_ALLOCATED_HEAP to 1 to have the application allocate * the array used as the FreeRTOS heap. Set to 0 to have the linker allocate * the array used as the FreeRTOS heap. Defaults to 0 if left undefined. */ -#define configAPPLICATION_ALLOCATED_HEAP 0 +#define configAPPLICATION_ALLOCATED_HEAP 0 /* Set configSTACK_ALLOCATION_FROM_SEPARATE_HEAP to 1 to have task stacks * allocated from somewhere other than the FreeRTOS heap. This is useful if you @@ -300,12 +300,12 @@ * come from the standard FreeRTOS heap. The application writer must provide * implementations for pvPortMallocStack() and vPortFreeStack() if set to 1. * Defaults to 0 if left undefined. */ -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 /* Set configENABLE_HEAP_PROTECTOR to 1 to enable bounds checking and * obfuscation to internal heap block pointers in heap_4.c and heap_5.c to help * catch pointer corruptions. Defaults to 0 if left undefined. */ -#define configENABLE_HEAP_PROTECTOR 0 +#define configENABLE_HEAP_PROTECTOR 0 /******************************************************************************/ /* Interrupt nesting behaviour configuration. *********************************/ @@ -315,7 +315,7 @@ * switch performing interrupts. Not supported by all FreeRTOS ports. See * https://www.freertos.org/RTOS-Cortex-M3-M4.html for information specific to * ARM Cortex-M devices. */ -#define configKERNEL_INTERRUPT_PRIORITY 0 +#define configKERNEL_INTERRUPT_PRIORITY 0 /* configMAX_SYSCALL_INTERRUPT_PRIORITY sets the interrupt priority above which * FreeRTOS API calls must not be made. Interrupts above this priority are @@ -323,11 +323,11 @@ * to the highest interrupt priority (0). Not supported by all FreeRTOS ports. * See https://www.freertos.org/RTOS-Cortex-M3-M4.html for information specific * to ARM Cortex-M devices. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 0 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 0 /* Another name for configMAX_SYSCALL_INTERRUPT_PRIORITY - the name used depends * on the FreeRTOS port. */ -#define configMAX_API_CALL_INTERRUPT_PRIORITY 0 +#define configMAX_API_CALL_INTERRUPT_PRIORITY 0 /******************************************************************************/ /* Hook and callback function related definitions. ****************************/ @@ -337,10 +337,10 @@ * functionality in the build. Set to 0 to exclude the hook functionality from * the build. The application writer is responsible for providing the hook * function for any set to 1. See https://www.freertos.org/a00016.html. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 -#define configUSE_DAEMON_TASK_STARTUP_HOOK 0 +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configUSE_DAEMON_TASK_STARTUP_HOOK 0 /* Set configUSE_SB_COMPLETED_CALLBACK to 1 to have send and receive completed * callbacks for each instance of a stream buffer or message buffer. When the @@ -348,7 +348,7 @@ * xStreamBufferCreateStaticWithCallback() (and likewise APIs for message * buffer) can be used to create a stream buffer or message buffer instance * with application provided callbacks. Defaults to 0 if left undefined. */ -#define configUSE_SB_COMPLETED_CALLBACK 0 +#define configUSE_SB_COMPLETED_CALLBACK 0 /* Set configCHECK_FOR_STACK_OVERFLOW to 1 or 2 for FreeRTOS to check for a * stack overflow at the time of a context switch. Set to 0 to not look for a @@ -362,7 +362,7 @@ * configCHECK_FOR_STACK_OVERFLOW is set to 1. See * https://www.freertos.org/Stacks-and-stack-overflow-checking.html Defaults to * 0 if left undefined. */ -#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_FOR_STACK_OVERFLOW 2 /******************************************************************************/ /* Run time and task stats gathering related definitions. *********************/ @@ -373,20 +373,20 @@ * application writer needs to provide a clock source if set to 1. Defaults to * 0 if left undefined. See https://www.freertos.org/rtos-run-time-stats.html. */ -#define configGENERATE_RUN_TIME_STATS 0 +#define configGENERATE_RUN_TIME_STATS 0 /* Set configUSE_TRACE_FACILITY to include additional task structure members * are used by trace and visualisation functions and tools. Set to 0 to exclude * the additional information from the structures. Defaults to 0 if left * undefined. */ -#define configUSE_TRACE_FACILITY 0 +#define configUSE_TRACE_FACILITY 0 /* Set to 1 to include the vTaskList() and vTaskGetRunTimeStats() functions in * the build. Set to 0 to exclude these functions from the build. These two * functions introduce a dependency on string formatting functions that would * otherwise not exist - hence they are kept separate. Defaults to 0 if left * undefined. */ -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 /******************************************************************************/ /* Co-routine related definitions. ********************************************/ @@ -396,12 +396,12 @@ * build, or 0 to omit co-routine functionality from the build. To include * co-routines, croutine.c must be included in the project. Defaults to 0 if * left undefined. */ -#define configUSE_CO_ROUTINES 0 +#define configUSE_CO_ROUTINES 0 /* configMAX_CO_ROUTINE_PRIORITIES defines the number of priorities available * to the application co-routines. Any number of co-routines can share the same * priority. Defaults to 0 if left undefined. */ -#define configMAX_CO_ROUTINE_PRIORITIES 1 +#define configMAX_CO_ROUTINE_PRIORITIES 1 /******************************************************************************/ /* Debugging assistance. ******************************************************/ @@ -419,8 +419,8 @@ if( ( x ) == 0 ) \ { \ taskDISABLE_INTERRUPTS(); \ - for( ;; ) \ - ; \ + for( ; ; ) \ + ; \ } /******************************************************************************/ @@ -433,47 +433,47 @@ * https://www.freertos.org/a00110.html#configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS * Defaults to 0 if left undefined. Only used by the FreeRTOS Cortex-M MPU * ports, not the standard ARMv7-M Cortex-M port. */ -#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0 +#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0 /* Set configTOTAL_MPU_REGIONS to the number of MPU regions implemented on your * target hardware. Normally 8 or 16. Only used by the FreeRTOS Cortex-M MPU * ports, not the standard ARMv7-M Cortex-M port. Defaults to 8 if left * undefined. */ -#define configTOTAL_MPU_REGIONS 8 +#define configTOTAL_MPU_REGIONS 8 /* configTEX_S_C_B_FLASH allows application writers to override the default * values for the for TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits * for the MPU region covering Flash. Defaults to 0x07UL (which means TEX=000, * S=1, C=1, B=1) if left undefined. Only used by the FreeRTOS Cortex-M MPU * ports, not the standard ARMv7-M Cortex-M port. */ -#define configTEX_S_C_B_FLASH 0x07UL +#define configTEX_S_C_B_FLASH 0x07UL /* configTEX_S_C_B_SRAM allows application writers to override the default * values for the for TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits * for the MPU region covering RAM. Defaults to 0x07UL (which means TEX=000, * S=1, C=1, B=1) if left undefined. Only used by the FreeRTOS Cortex-M MPU * ports, not the standard ARMv7-M Cortex-M port. */ -#define configTEX_S_C_B_SRAM 0x07UL +#define configTEX_S_C_B_SRAM 0x07UL /* Set configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY to 0 to prevent any privilege * escalations originating from outside of the kernel code itself. Set to 1 to * allow application tasks to raise privilege. Defaults to 1 if left undefined. * Only used by the FreeRTOS Cortex-M MPU ports, not the standard ARMv7-M * Cortex-M port. */ -#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 1 +#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 1 /* Set configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS to 1 to allow unprivileged * tasks enter critical sections (effectively mask interrupts). Set to 0 to * prevent unprivileged tasks entering critical sections. Defaults to 1 if left * undefined. Only used by the FreeRTOS Cortex-M MPU ports, not the standard * ARMv7-M Cortex-M port. */ -#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 0 +#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 0 /* FreeRTOS Kernel version 10.6.0 introduced a new v2 MPU wrapper, namely * mpu_wrappers_v2.c. Set configUSE_MPU_WRAPPERS_V1 to 0 to use the new v2 MPU * wrapper. Set configUSE_MPU_WRAPPERS_V1 to 1 to use the old v1 MPU wrapper * (mpu_wrappers.c). Defaults to 0 if left undefined. */ -#define configUSE_MPU_WRAPPERS_V1 0 +#define configUSE_MPU_WRAPPERS_V1 0 /* When using the v2 MPU wrapper, set configPROTECTED_KERNEL_OBJECT_POOL_SIZE to * the total number of kernel objects, which includes tasks, queues, semaphores, @@ -481,7 +481,7 @@ * application. The application will not be able to have more than * configPROTECTED_KERNEL_OBJECT_POOL_SIZE kernel objects at any point of * time. */ -#define configPROTECTED_KERNEL_OBJECT_POOL_SIZE 10 +#define configPROTECTED_KERNEL_OBJECT_POOL_SIZE 10 /* When using the v2 MPU wrapper, set configSYSTEM_CALL_STACK_SIZE to the size * of the system call stack in words. Each task has a statically allocated @@ -489,7 +489,7 @@ * calls. For example, if configSYSTEM_CALL_STACK_SIZE is defined as 128 and * there are 10 tasks in the application, the total amount of memory used for * system call stacks is 128 * 10 = 1280 words. */ -#define configSYSTEM_CALL_STACK_SIZE 128 +#define configSYSTEM_CALL_STACK_SIZE 128 /* When using the v2 MPU wrapper, set configENABLE_ACCESS_CONTROL_LIST to 1 to * enable Access Control List (ACL) feature. When ACL is enabled, an @@ -497,7 +497,7 @@ * than itself. The application writer needs to explicitly grant the * unprivileged task access to the kernel objects it needs using the APIs * provided for the same. Defaults to 0 if left undefined. */ -#define configENABLE_ACCESS_CONTROL_LIST 1 +#define configENABLE_ACCESS_CONTROL_LIST 1 /******************************************************************************/ /* SMP( Symmetric MultiProcessing ) Specific Configuration definitions. *******/ @@ -517,7 +517,7 @@ * is able to run. If configRUN_MULTIPLE_PRIORITIES is set to 1, multiple tasks * with different priorities may run simultaneously - so a higher and lower * priority task may run on different cores at the same time. */ -#define configRUN_MULTIPLE_PRIORITIES 0 +#define configRUN_MULTIPLE_PRIORITIES 0 /* When using SMP (i.e. configNUMBER_OF_CORES is greater than one), set * configUSE_CORE_AFFINITY to 1 to enable core affinity feature. When core @@ -525,7 +525,7 @@ * vTaskCoreAffinityGet APIs can be used to set and retrieve which cores a task * can run on. If configUSE_CORE_AFFINITY is set to 0 then the FreeRTOS * scheduler is free to run any task on any available core. */ -#define configUSE_CORE_AFFINITY 0 +#define configUSE_CORE_AFFINITY 0 /* When using SMP with core affinity feature enabled, set * configTASK_DEFAULT_CORE_AFFINITY to change the default core affinity mask for @@ -535,25 +535,25 @@ * value is useful, if swapping tasks between cores is not supported (e.g. * Tricore) or if legacy code should be controlled. Defaults to tskNO_AFFINITY * if left undefined. */ -#define configTASK_DEFAULT_CORE_AFFINITY tskNO_AFFINITY +#define configTASK_DEFAULT_CORE_AFFINITY tskNO_AFFINITY /* When using SMP (i.e. configNUMBER_OF_CORES is greater than one), if * configUSE_TASK_PREEMPTION_DISABLE is set to 1, individual tasks can be set to * either pre-emptive or co-operative mode using the vTaskPreemptionDisable and * vTaskPreemptionEnable APIs. */ -#define configUSE_TASK_PREEMPTION_DISABLE 0 +#define configUSE_TASK_PREEMPTION_DISABLE 0 /* When using SMP (i.e. configNUMBER_OF_CORES is greater than one), set * configUSE_PASSIVE_IDLE_HOOK to 1 to allow the application writer to use * the passive idle task hook to add background functionality without the * overhead of a separate task. Defaults to 0 if left undefined. */ -#define configUSE_PASSIVE_IDLE_HOOK 0 +#define configUSE_PASSIVE_IDLE_HOOK 0 /* When using SMP (i.e. configNUMBER_OF_CORES is greater than one), * configTIMER_SERVICE_TASK_CORE_AFFINITY allows the application writer to set * the core affinity of the RTOS Daemon/Timer Service task. Defaults to * tskNO_AFFINITY if left undefined. */ -#define configTIMER_SERVICE_TASK_CORE_AFFINITY tskNO_AFFINITY +#define configTIMER_SERVICE_TASK_CORE_AFFINITY tskNO_AFFINITY /******************************************************************************/ /* ARMv8-M secure side port related definitions. ******************************/ @@ -562,7 +562,7 @@ /* secureconfigMAX_SECURE_CONTEXTS define the maximum number of tasks that can * call into the secure side of an ARMv8-M chip. Not used by any other ports. */ -#define secureconfigMAX_SECURE_CONTEXTS 5 +#define secureconfigMAX_SECURE_CONTEXTS 5 /* Defines the kernel provided implementation of * vApplicationGetIdleTaskMemory() and vApplicationGetTimerTaskMemory() @@ -570,7 +570,7 @@ * respectively. The application can provide it's own implementation of * vApplicationGetIdleTaskMemory() and vApplicationGetTimerTaskMemory() by * setting configKERNEL_PROVIDED_STATIC_MEMORY to 0 or leaving it undefined. */ -#define configKERNEL_PROVIDED_STATIC_MEMORY 1 +#define configKERNEL_PROVIDED_STATIC_MEMORY 1 /******************************************************************************/ /* ARMv8-M port Specific Configuration definitions. ***************************/ @@ -580,22 +580,22 @@ * to enable the TrustZone support in FreeRTOS ARMv8-M ports which allows the * non-secure FreeRTOS tasks to call the (non-secure callable) functions * exported from secure side. */ -#define configENABLE_TRUSTZONE 1 +#define configENABLE_TRUSTZONE 1 /* If the application writer does not want to use TrustZone, but the hardware * does not support disabling TrustZone then the entire application (including * the FreeRTOS scheduler) can run on the secure side without ever branching to * the non-secure side. To do that, in addition to setting * configENABLE_TRUSTZONE to 0, also set configRUN_FREERTOS_SECURE_ONLY to 1. */ -#define configRUN_FREERTOS_SECURE_ONLY 1 +#define configRUN_FREERTOS_SECURE_ONLY 1 /* Set configENABLE_MPU to 1 to enable the Memory Protection Unit (MPU), or 0 * to leave the Memory Protection Unit disabled. */ -#define configENABLE_MPU 1 +#define configENABLE_MPU 1 /* Set configENABLE_FPU to 1 to enable the Floating Point Unit (FPU), or 0 * to leave the Floating Point Unit disabled. */ -#define configENABLE_FPU 1 +#define configENABLE_FPU 1 /* Set configENABLE_MVE to 1 to enable the M-Profile Vector Extension (MVE) * support, or 0 to leave the MVE support disabled. This option is only @@ -603,7 +603,7 @@ * (MVE) is available only on these architectures. configENABLE_MVE must be left * undefined, or defined to 0 for the Cortex-M23,Cortex-M33 and Cortex-M35P * ports. */ -#define configENABLE_MVE 1 +#define configENABLE_MVE 1 /******************************************************************************/ /* ARMv7-M and ARMv8-M port Specific Configuration definitions. ***************/ @@ -624,7 +624,7 @@ * configCHECK_HANDLER_INSTALLATION to 0. * * Defaults to 1 if left undefined. */ -#define configCHECK_HANDLER_INSTALLATION 1 +#define configCHECK_HANDLER_INSTALLATION 1 /******************************************************************************/ /* Definitions that include or exclude functionality. *************************/ @@ -632,36 +632,36 @@ /* Set the following configUSE_* constants to 1 to include the named feature in * the build, or 0 to exclude the named feature from the build. */ -#define configUSE_TASK_NOTIFICATIONS 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configUSE_QUEUE_SETS 0 -#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_TASK_NOTIFICATIONS 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_QUEUE_SETS 0 +#define configUSE_APPLICATION_TASK_TAG 0 /* USE_POSIX_ERRNO enables the task global FreeRTOS_errno variable which will * containthe most recent error for that task. */ -#define configUSE_POSIX_ERRNO 0 +#define configUSE_POSIX_ERRNO 0 /* Set the following INCLUDE_* constants to 1 to incldue the named API function, * or 0 to exclude the named API function. Most linkers will remove unused * functions even when the constant is 1. */ -#define INCLUDE_vTaskPrioritySet 1 -#define INCLUDE_uxTaskPriorityGet 1 -#define INCLUDE_vTaskDelete 1 -#define INCLUDE_vTaskSuspend 1 -#define INCLUDE_xResumeFromISR 1 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 1 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 1 -#define INCLUDE_xTimerPendFunctionCall 0 -#define INCLUDE_xTaskAbortDelay 0 -#define INCLUDE_xTaskGetHandle 0 -#define INCLUDE_xTaskResumeFromISR 1 +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_xResumeFromISR 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 1 +#define INCLUDE_xTimerPendFunctionCall 0 +#define INCLUDE_xTaskAbortDelay 0 +#define INCLUDE_xTaskGetHandle 0 +#define INCLUDE_xTaskResumeFromISR 1 #endif /* FREERTOS_CONFIG_H */