Permalink
Browse files

ncproxy

  • Loading branch information...
vinced committed Apr 24, 2011
1 parent 55a9415 commit 0e824dbd0433ac22037ff25c9748f3b676ba89e8
View
@@ -1,4 +1,5 @@
src/*.exe
+*.pyc
src/bitcoin
src/bitcoind
.*.swp
View
@@ -54,10 +54,31 @@ dump the global list:
`namecoind name_scan`
+VALUES
+===================
+
+Values for names in the d/ namespace are JSON encoded. The simplest value is of this form:
+
+ {'map': {'' => 'foo.com'}}
+
+or
+
+ {'map': {'' => '10.0.0.1'}}
+
+In the first case, the domain is mapped to a traditionl DNS domain. If the name to be resolved is x.bar.bit, it is mapped to x.foo.com.
+
+In the second case, bar.bit and all subdomains map to an IP address.
+
+DNS conduits
+=============
+
+SOCKS5/Tor name resolver: See `ncproxy` in the client sub-directory.
+
+In the near future gzip encoding of the value will be possible, but ncproxy does not support this yet.
+
ROADMAP
===================
* DNS zone conduit to allow normal DNS server to serve the .bit domain
-* Tor naming resolution conduit
* Firefox/chrome/... plugins
* GUI
View
@@ -0,0 +1,27 @@
+ncproxy
+==============
+
+A SOCKS5 adapter that provides namecoin name resolution.
+
+This program listens for SOCKS5 connections, resolves .bit DNS names if any
+and passes the request to a parent SOCKS5 proxy. It can be used between polipo
+and Tor.
+
+HowTo
+=============
+
+This assumes namecoin is running on the local machine with the default RPC port, and Tor and polipo are installed.
+
+Run ncproxy with RPC user and password arguments for namecoin:
+
+`./ncproxy --user=USER --pass=PASS`
+
+The ncproxy script listens on port 9055, so configure /etc/polipo/config as follows:
+
+`socksParentProxy = "localhost:9055"`
+
+Make sure that there is just one such statement. Then do
+
+`sudo service polipo restart`
+
+Check that your browser is already configured to use polipo. For example, Torbutton does this configuration for you. .bit should now resolve correctly since polipo will pass all requests through ncproxy. ncproxy also resolves .b and .n if you prefer the shorthand and the target web site supports it.
View
@@ -0,0 +1,201 @@
+SocksiPy version 1.00
+A Python SOCKS module.
+(C) 2006 Dan-Haim. All rights reserved.
+See LICENSE file for details.
+
+
+WHAT IS A SOCKS PROXY?
+A SOCKS proxy is a proxy server at the TCP level. In other words, it acts as
+a tunnel, relaying all traffic going through it without modifying it.
+SOCKS proxies can be used to relay traffic using any network protocol that
+uses TCP.
+
+WHAT IS SOCKSIPY?
+This Python module allows you to create TCP connections through a SOCKS
+proxy without any special effort.
+
+PROXY COMPATIBILITY
+SocksiPy is compatible with three different types of proxies:
+1. SOCKS Version 4 (Socks4), including the Socks4a extension.
+2. SOCKS Version 5 (Socks5).
+3. HTTP Proxies which support tunneling using the CONNECT method.
+
+SYSTEM REQUIREMENTS
+Being written in Python, SocksiPy can run on any platform that has a Python
+interpreter and TCP/IP support.
+This module has been tested with Python 2.3 and should work with greater versions
+just as well.
+
+
+INSTALLATION
+-------------
+
+Simply copy the file "socks.py" to your Python's lib/site-packages directory,
+and you're ready to go.
+
+
+USAGE
+------
+
+First load the socks module with the command:
+
+>>> import socks
+>>>
+
+The socks module provides a class called "socksocket", which is the base to
+all of the module's functionality.
+The socksocket object has the same initialization parameters as the normal socket
+object to ensure maximal compatibility, however it should be noted that socksocket
+will only function with family being AF_INET and type being SOCK_STREAM.
+Generally, it is best to initialize the socksocket object with no parameters
+
+>>> s = socks.socksocket()
+>>>
+
+The socksocket object has an interface which is very similiar to socket's (in fact
+the socksocket class is derived from socket) with a few extra methods.
+To select the proxy server you would like to use, use the setproxy method, whose
+syntax is:
+
+setproxy(proxytype, addr[, port[, rdns[, username[, password]]]])
+
+Explaination of the parameters:
+
+proxytype - The type of the proxy server. This can be one of three possible
+choices: PROXY_TYPE_SOCKS4, PROXY_TYPE_SOCKS5 and PROXY_TYPE_HTTP for Socks4,
+Socks5 and HTTP servers respectively.
+
+addr - The IP address or DNS name of the proxy server.
+
+port - The port of the proxy server. Defaults to 1080 for socks and 8080 for http.
+
+rdns - This is a boolean flag than modifies the behavior regarding DNS resolving.
+If it is set to True, DNS resolving will be preformed remotely, on the server.
+If it is set to False, DNS resolving will be preformed locally. Please note that
+setting this to True with Socks4 servers actually use an extension to the protocol,
+called Socks4a, which may not be supported on all servers (Socks5 and http servers
+always support DNS). The default is True.
+
+username - For Socks5 servers, this allows simple username / password authentication
+with the server. For Socks4 servers, this parameter will be sent as the userid.
+This parameter is ignored if an HTTP server is being used. If it is not provided,
+authentication will not be used (servers may accept unauthentication requests).
+
+password - This parameter is valid only for Socks5 servers and specifies the
+respective password for the username provided.
+
+Example of usage:
+
+>>> s.setproxy(socks.PROXY_TYPE_SOCKS5,"socks.example.com")
+>>>
+
+After the setproxy method has been called, simply call the connect method with the
+traditional parameters to establish a connection through the proxy:
+
+>>> s.connect(("www.sourceforge.net",80))
+>>>
+
+Connection will take a bit longer to allow negotiation with the proxy server.
+Please note that calling connect without calling setproxy earlier will connect
+without a proxy (just like a regular socket).
+
+Errors: Any errors in the connection process will trigger exceptions. The exception
+may either be generated by the underlying socket layer or may be custom module
+exceptions, whose details follow:
+
+class ProxyError - This is a base exception class. It is not raised directly but
+rather all other exception classes raised by this module are derived from it.
+This allows an easy way to catch all proxy-related errors.
+
+class GeneralProxyError - When thrown, it indicates a problem which does not fall
+into another category. The parameter is a tuple containing an error code and a
+description of the error, from the following list:
+1 - invalid data - This error means that unexpected data has been received from
+the server. The most common reason is that the server specified as the proxy is
+not really a Socks4/Socks5/HTTP proxy, or maybe the proxy type specified is wrong.
+4 - bad proxy type - This will be raised if the type of the proxy supplied to the
+setproxy function was not PROXY_TYPE_SOCKS4/PROXY_TYPE_SOCKS5/PROXY_TYPE_HTTP.
+5 - bad input - This will be raised if the connect method is called with bad input
+parameters.
+
+class Socks5AuthError - This indicates that the connection through a Socks5 server
+failed due to an authentication problem. The parameter is a tuple containing a
+code and a description message according to the following list:
+
+1 - authentication is required - This will happen if you use a Socks5 server which
+requires authentication without providing a username / password at all.
+2 - all offered authentication methods were rejected - This will happen if the proxy
+requires a special authentication method which is not supported by this module.
+3 - unknown username or invalid password - Self descriptive.
+
+class Socks5Error - This will be raised for Socks5 errors which are not related to
+authentication. The parameter is a tuple containing a code and a description of the
+error, as given by the server. The possible errors, according to the RFC are:
+
+1 - General SOCKS server failure - If for any reason the proxy server is unable to
+fulfill your request (internal server error).
+2 - connection not allowed by ruleset - If the address you're trying to connect to
+is blacklisted on the server or requires authentication.
+3 - Network unreachable - The target could not be contacted. A router on the network
+had replied with a destination net unreachable error.
+4 - Host unreachable - The target could not be contacted. A router on the network
+had replied with a destination host unreachable error.
+5 - Connection refused - The target server has actively refused the connection
+(the requested port is closed).
+6 - TTL expired - The TTL value of the SYN packet from the proxy to the target server
+has expired. This usually means that there are network problems causing the packet
+to be caught in a router-to-router "ping-pong".
+7 - Command not supported - The client has issued an invalid command. When using this
+module, this error should not occur.
+8 - Address type not supported - The client has provided an invalid address type.
+When using this module, this error should not occur.
+
+class Socks4Error - This will be raised for Socks4 errors. The parameter is a tuple
+containing a code and a description of the error, as given by the server. The
+possible error, according to the specification are:
+
+1 - Request rejected or failed - Will be raised in the event of an failure for any
+reason other then the two mentioned next.
+2 - request rejected because SOCKS server cannot connect to identd on the client -
+The Socks server had tried an ident lookup on your computer and has failed. In this
+case you should run an identd server and/or configure your firewall to allow incoming
+connections to local port 113 from the remote server.
+3 - request rejected because the client program and identd report different user-ids -
+The Socks server had performed an ident lookup on your computer and has received a
+different userid than the one you have provided. Change your userid (through the
+username parameter of the setproxy method) to match and try again.
+
+class HTTPError - This will be raised for HTTP errors. The parameter is a tuple
+containing the HTTP status code and the description of the server.
+
+
+After establishing the connection, the object behaves like a standard socket.
+Call the close method to close the connection.
+
+In addition to the socksocket class, an additional function worth mentioning is the
+setdefaultproxy function. The parameters are the same as the setproxy method.
+This function will set default proxy settings for newly created socksocket objects,
+in which the proxy settings haven't been changed via the setproxy method.
+This is quite useful if you wish to force 3rd party modules to use a socks proxy,
+by overriding the socket object.
+For example:
+
+>>> socks.setdefaultproxy(socks.PROXY_TYPE_SOCKS5,"socks.example.com")
+>>> socket.socket = socks.socksocket
+>>> urllib.urlopen("http://www.sourceforge.net/")
+
+
+PROBLEMS
+---------
+
+If you have any problems using this module, please first refer to the BUGS file
+(containing current bugs and issues). If your problem is not mentioned you may
+contact the author at the following E-Mail address:
+
+negativeiq@users.sourceforge.net
+
+Please allow some time for your question to be received and handled.
+
+
+Dan-Haim,
+Author.
View
@@ -0,0 +1,26 @@
+
+"""
+ Copyright (c) 2007 Jan-Klaas Kollhof
+
+ This file is part of jsonrpc.
+
+ jsonrpc is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with this software; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+"""
+
+from jsonrpc.json import loads, dumps, JSONEncodeException, JSONDecodeException
+from jsonrpc.proxy import ServiceProxy, JSONRPCException
+from jsonrpc.serviceHandler import ServiceMethod, ServiceHandler, ServiceMethodNotFound, ServiceException
+from jsonrpc.cgiwrapper import handleCGI
+from jsonrpc.modpywrapper import handler
@@ -0,0 +1,20 @@
+
+"""
+ Copyright (c) 2007 Jan-Klaas Kollhof
+
+ This file is part of jsonrpc.
+
+ jsonrpc is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with this software; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+"""
@@ -0,0 +1,55 @@
+
+"""
+ Copyright (c) 2007 Jan-Klaas Kollhof
+
+ This file is part of jsonrpc.
+
+ jsonrpc is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with this software; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+"""
+import unittest
+import jsonrpc
+from types import *
+
+class Service(object):
+ @jsonrpc.ServiceMethod
+ def echo(self, arg):
+ return arg
+
+
+class TestCGIWrapper(unittest.TestCase):
+
+ def setUp(self):
+ pass
+
+ def tearDown(self):
+ pass
+
+ def test_runCGIHandler(self):
+ from StringIO import StringIO
+
+ json=u'{"method":"echo","params":["foobar"], "id":""}'
+ fin=StringIO(json)
+ fout=StringIO()
+
+ env = {"CONTENT_LENGTH":len(json)}
+
+ jsonrpc.handleCGI(service=Service(), fin=fin, fout=fout, env=env)
+
+ data = StringIO(fout.getvalue())
+ data.readline()
+ data.readline()
+ data = data.read()
+ self.assertEquals(jsonrpc.loads(data), {"result":"foobar", "error":None, "id":""})
+
Oops, something went wrong.

0 comments on commit 0e824db

Please sign in to comment.