Skip to content
Industrial IoT Wireless Analog To Digital Converter 3.3V ADC
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
IoT Wireless ADC(3.3V).png
IoT Wireless Analog To Digital Converter ADC.png
README.md
ncd.io Wireless ADC .exe

README.md

Long-Range-Wireless-Analog-To-Digital-Converter

Industrial IoT Wireless Analog To Digital Converter 3.3V ADC Industrial IoT Long Range Wireless 2 Channel Analog To Digital Converter Transmitter With 2 Mile Range

Long range wireless IoT 2 Channel Analog To Digital Converter can be found over here https://store.ncd.io/product/iot-long-range-wireless-analog-digital-converter3-3v/

https://ncd.io/long-range-iot-wireless-analog-to-digital-converter-getting-started/ Labview Driver for ncd.io wireless 2 Channel Analog To Digital Converter

To use this Labview Utility You will need a Wireless to USB router, whihc can be found over here https://store.ncd.io/product/900hp-s3b-long-range-wireless-mesh-modem-with-usb-interface/

To use this UI, you will need to install following drivers Install run time engine from here 64bit http://www.ni.com/download/labview-run-time-engine-2017/6821/en/

32 bit http://www.ni.com/download/labview-run-time-engine-2017/6822/en/

Install NI Visa Driver -- http://www.ni.com/download/ni-visa-run-time-engine/6647/en/

Install Labview Run time serial driver http://www.ni.com/download/ni-serial-17.0/6613/en/ http://www.ni.com/download/labview-run-time-engine-2017-sp1/7191/en/

Getting strated guide for this product can be found over here https://ncd.io/long-range-iot-wireless-analog-to-digital-converter-getting-started/

complete product manual for this product can be found over here https://ncd.io/long-range-iot-wireless-analog-to-digital-converter-product-manual/

You can’t perform that action at this time.