diff --git a/Software/NeuroStimDuino/Readme.md b/Software/NeuroStimDuino/Readme.md
index d8f7ab4..78176eb 100644
--- a/Software/NeuroStimDuino/Readme.md
+++ b/Software/NeuroStimDuino/Readme.md
@@ -15,12 +15,12 @@ NeuroStimDuino can be controlled by an external microcontroller such as Arduino
| IDLY | 0x04 | Change inter-phase delay | 0 - 255, Unit: uSec. |
| DELY | 0x05 | Delay to the start of the stimulation pulse in each cycle | 0 - 1/(stimulation frequency), Unit: mSec.|
| SYMM | 0x06 | Generate symmetrical or asymmetrical stim waveform | 1 = Symm.; 0 = Asymm. |
-| ADDR | 0x07 | Change 7-bit I2C address | Allowed addresses = 0x08 - 0x77|
+| ADDR | 0x07 | Change 7-bit I2C address | Allowed addresses = 0x08 - 0x77;
program/switch_only flag = 1/0|
| SAMP | 0x08 | Sample current on channel 1 or 2 | - |
| READ | 0x09 | Read value of register | - |
| RSET | 0x0A | Reset NeuroStimDuino to default register values | - |
| EOFF | 0x0F | Generate Emergency Off condition | - |
-| STIM | 0x10 | Start stimulation on channel 1 or 2 for finite duration or stimulate indefinitely | 0 - 255 Sec;
Stim indefinitely flag = 0/1|
+| STIM | 0x10 | Start stimulation on channel 1 or 2 for finite duration or stimulate indefinitely | 0 - 255 Sec;
Stim indefinitely flag = 1/0|
| STOP | 0x12 | Stop stimulation on channel 1 or 2 | - |
| ENAB | 0x14 | Enable or disable a stim. channel | 1 = Enable; 0 = Disable |
| WAIT | 0x20 | Idle | - |