Skip to content
Branch: master
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
165 lines (127 sloc) 5.93 KB
title order page
Build on Ubuntu

Since NextEPC is an open source project, you can build and use this program directly from source code. If you have already installed it with a package manager, or are not interested in learning the source code, you can skip this guide and proceed to the next configuration guide.

Note that this guide is based on Ubuntu 18.04(Bionic Beaver) and 16.04(Zenial) Distribution. To use Ubuntu 14.04(Trusty), you must use a different guide.


NextEPC requires MongoDB and TUN device. If you have previously installed NextEPC according to the Installation Guide, they was configured at that time. So, you can skip this step.

Install Mongo DB with Package Manager.

sudo apt-get update
sudo apt-get -y install mongodb
sudo systemctl start mongodb (if '/usr/bin/mongod' is not running)

To run NextEPC with least privilege, TUN device permission should be a crw-rw-rw-(666). Otherwise, you need to run nextepc daemon with root privilege. If the permission is not crw-rw-rw-(666), you may need to install udev package. Nevertheless, if the permission do not change , you can run nextepc with root privileges or change the permission using chmod 666 /dev/net/tun.

ls -al /dev/net/tun
crw-rw---- 1 root 28 10, 200 Feb 11 05:13 /dev/net/tun
sudo apt-get install udev
sudo systemctl start systemd-udevd (if '/lib/systemd/systemd-udevd' is not running)

Write the configuration file for the TUN deivce.

sudo sh -c "cat << EOF > /etc/systemd/network/99-nextepc.netdev

Create the TUN device. Interface name will be pgwtun.

sudo systemctl enable systemd-networkd
sudo systemctl restart systemd-networkd

sudo apt-get -y install net-tools
ifconfig pgwtun

Then, you need to check IPv6 Kernel Configuration. Although you can skip this process, we recommend that you set this up to support IPv6-enabled UE.

sysctl -n net.ipv6.conf.pgwtun.disable_ipv6

(if the output is 0 and IPv6 is enabled, skip the followings)
sudo sh -c "echo 'net.ipv6.conf.pgwtun.disable_ipv6=0' > /etc/sysctl.d/30-nextepc.conf"
sudo sysctl -p /etc/sysctl.d/30-nextepc.conf

You are now ready to set the IP address on TUN device. If IPv6 is disabled for TUN device, please remove Address=cafe::1/64 from below.

sudo sh -c "cat << EOF > /etc/systemd/network/

Check the TUN(pgwtun) device again.

sudo systemctl restart systemd-networkd
ifconfig pgwtun


Install the depedencies for building the source

sudo apt-get -y install autoconf libtool gcc pkg-config git flex bison libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev libidn11-dev libmongoc-dev libbson-dev libyaml-dev

Git clone and compile

acetcom@nextepc:~$ git clone
ccetcom@nextepc:~$ cd nextepc
acetcom@nextepc:~/nextepc$ autoreconf -iv
acetcom@nextepc:~/nextepc$ ./configure --prefix=`pwd`/install
acetcom@nextepc:~/nextepc$ make -j `nproc`
acetcom@nextepc:~/nextepc$ make install

We provide a program that checks whether the installation is correct. After running the wireshark, select loopback interface, filter s1ap || diameter || gtpv2 || gtp and run ./test/testepc. You can see the virtually created packets. [testepc.pcapng]

Note that you should stop all nextepc daemons before running test program if you have already installed it with a package manage.

(if nextepc-daemons are running)
sudo systemctl stop nextepc-mmed
sudo systemctl stop nextepc-sgwd
sudo systemctl stop nextepc-pgwd
sudo systemctl stop nextepc-hssd
sudo systemctl stop nextepc-pcrfd

acetcom@nextepc:~/nextepc$ ./test/testepc

It is a convenient tool called nextepc-epcd for developers. This daemon includes both MME, SGW, PGW, HSS, and PCRF. So, instead of running all 5 daemons, you can just run nextepc-epcd in your development environment.

acetcom@nextepc:~/nextepc$ ./nextepc-epcd
NextEPC daemon v0.3.3 - Feb 11 2018 07:19:59

  PID[3720] : '/home/acetcom/nextepc/install/var/run/nextepc-epcd/pid'
  File Logging : '/home/acetcom/nextepc/install/var/log/nextepc/nextepc.log'
  MongoDB URI : 'mongodb://localhost/nextepc'
  Configuration : '/home/acetcom/nextepc/install/etc/nextepc/nextepc.conf'
[02/11 07:26:42.001] PCRF try to initialize

When you run nextepc-epcd, all logs for MME, SGW, PGW, PCRF, and HSS are written to nextepc.log, and all settings are managed in one place for nextepc.conf. You can find the log/conf path at the beginning of running screen.

Sometimes, you may want to use newly updated source code.

(Control-C kill nextepc-epcd)
acetcom@nextepc:~/nextepc$ make maintainer-clean
acetcom@nextepc:~/nextepc$ rm -rf ./install
acetcom@nextepc:~/nextepc$ git pull
acetcom@nextepc:~/nextepc$ autoreconf -iv
acetcom@nextepc:~/nextepc$ ./configure --prefix=`pwd`/install
acetcom@nextepc:~/nextepc$ make -j `nproc`
acetcom@nextepc:~/nextepc$ make install
acetcom@nextepc:~/nextepc$ ./nextepc-epcd

Web User Interface

To get the latest Node.js and NPM, please visit the official Node.js website:

Or, you can install Node.js and NPM with a package manager.

sudo apt-get -y install curl
curl -sL | sudo -E bash -
sudo apt-get -y install nodejs

Install the dependencies to run WebUI

acetcom@nextepc:~/nextepc$ cd webui
acetcom@nextepc:~/nextepc/webui$ npm install

Running WebUI

acetcom@nextepc:~/nextepc/webui$ npm run dev

Now the web server is running on http://localhost:3000.

You can’t perform that action at this time.