This document describes the technical aspects of the Node.js release process. The intended audience is those who have been authorized by the Node.js Foundation Technical Steering Committee (TSC) to create, promote, and sign official release builds for Node.js, hosted on https://nodejs.org/.
Release authorization is given by the Node.js TSC. Once authorized, an individual must be have the following:
There are three relevant Jenkins jobs that should be used for a release flow:
a. Test runs: node-test-pull-request is used for a final full-test run to ensure that the current HEAD is stable.
b. Nightly builds: (optional) iojs+release can be used to create a nightly release for the current HEAD if public test releases are required. Builds triggered with this job are published straight to https://nodejs.org/download/nightly/ and are available for public download.
c. Release builds: iojs+release does all of the work to build all required release assets. Promotion of the release files is a manual step once they are ready (see below).
The Node.js build team is able to provide this access to individuals authorized by the TSC.
The dist user on nodejs.org controls the assets available in https://nodejs.org/download/. https://nodejs.org/dist/ is an alias for https://nodejs.org/download/release/.
The Jenkins release build workers upload their artifacts to the web server as the staging user. The dist user has access to move these assets to public access while, for security, the staging user does not.
Nightly builds are promoted automatically on the server by a cron task for the dist user.
Release builds require manual promotion by an individual with SSH access to the server as the dist user. The Node.js build team is able to provide this access to individuals authorized by the TSC.
A SHASUMS256.txt file is produced for every promoted build, nightly, and releases. Additionally for releases, this file is signed by the individual responsible for that release. In order to be able to verify downloaded binaries, the public should be able to check that the SHASUMS256.txt file has been signed by someone who has been authorized to create a release.
The GPG keys should be fetchable from a known third-party keyserver. The SKS Keyservers at https://sks-keyservers.net are recommended. Use the submission form to submit a new GPG key. Keys should be fetchable via:
$ gpg --keyserver pool.sks-keyservers.net --recv-keys <FINGERPRINT>The key you use may be a child/subkey of an existing key.
Additionally, full GPG key fingerprints for individuals authorized to release should be listed in the Node.js GitHub README.md file.
Notes:
- Dates listed below as "YYYY-MM-DD" should be the date of the release as UTC. Use
date -u +'%Y-%m-%d'to find out what this is. - Version strings are listed below as "vx.y.z". Substitute for the release version.
Create a new branch named "vx.y.z-proposal", or something similar. Using git cherry-pick, bring the appropriate commits into your new branch. To determine the relevant commits, use branch-diff and changelog-maker (both are available on npm and should be installed globally). These tools depend on our commit metadata, as well as the semver-minor and semver-major GitHub labels. One drawback is that when the PR-URL metadata is accidentally omitted from a commit, the commit will show up because it's unsure if it's a duplicate or not.
For a list of commits that could be landed in a patch release on v5.x
$ branch-diff v5.x master --exclude-label=semver-major,semver-minor,dont-land-on-v5.x --filter-release --format=simpleCarefully review the list of commits looking for errors (incorrect PR-URL, incorrect semver, etc.). Commits labeled as semver minor or semver major should only be cherry-picked when appropriate for the type of release being made. Previous release commits and version bumps do not need to be cherry-picked.
Set the version for the proposed release using the following macros, which are already defined in src/node_version.h:
#define NODE_MAJOR_VERSION x
#define NODE_MINOR_VERSION y
#define NODE_PATCH_VERSION zSet the NODE_VERSION_IS_RELEASE macro value to 1. This causes the build to be produced with a version string that does not have a trailing pre-release tag:
#define NODE_VERSION_IS_RELEASE 1Also consider whether to bump NODE_MODULE_VERSION:
This macro is used to signal an ABI version for native addons. It currently has two common uses in the community:
- Determining what API to work against for compiling native addons, e.g. NAN uses it to form a compatibility-layer for much of what it wraps.
- Determining the ABI for downloading pre-built binaries of native addons, e.g. node-pre-gyp uses this value as exposed via
process.versions.modulesto help determine the appropriate binary to download at install-time.
The general rule is to bump this version when there are breaking ABI changes and also if there are non-trivial API changes. The rules are not yet strictly defined, so if in doubt, please confer with someone that will have a more informed perspective, such as a member of the NAN team.
Note that it is current TSC policy to bump major version when ABI changes. If you see a need to bump NODE_MODULE_VERSION then you should consult the TSC. Commits may need to be reverted or a major version bump may need to happen.
Collect a formatted list of commits since the last release. Use changelog-maker to do this.
$ changelog-maker --groupNote that changelog-maker counts commits since the last tag and if the last tag in the repository was not on the current branch you may have to supply a --start-ref argument:
$ changelog-maker --group --start-ref v2.3.1There is a separate CHANGELOG_*.md file for each major Node.js release line.
These are located in the doc/changelogs/ directory. Once the formatted list
of changes is collected, it must be added to the top of the relevant changelog
file in the release branch (e.g. a release for Node.js v4 would be added to the
/doc/changelogs/CHANGELOG_V4.md).
Please do not add the changelog entries to the root CHANGELOG.md file.
The new entry should take the following form:
<a id="x.y.x"></a>
## YYYY-MM-DD, Version x.y.z (Release Type), @releaser
### Notable changes
* List interesting changes here
* Particularly changes that are responsible for minor or major version bumps
* Also be sure to look at any changes introduced by dependencies such as npm
* ... and include any notable items from there
### Commits
* Include the full list of commits since the last release here. Do not include "Working on X.Y.Z+1" commits.The release type should be either Current, LTS, or Maintenance, depending on the type of release being produced.
Be sure that the <a> tag, as well as the two headings, are not
indented at all.
At the top of each CHANGELOG_*.md file, and in the root CHANGELOG.md file,
there is a table indexing all releases in each major release line. A link to
the new release needs to be added to each. Follow the existing examples and be
sure to add the release to the top of the list.
In the root CHANGELOG.md file, the most recent release for each release line
is shown in bold in the index. When updating the index, please make sure
to update the display accordingly by removing the bold styling from the previous
release.
If this release includes new APIs then it is necessary to document that they
were first added in this version. The relevant commits should already include
REPLACEME tags as per the example in the
docs README. Check for these tags with
grep REPLACEME doc/api/*.md, and substitute this node version with
sed -i "s/REPLACEME/$VERSION/g" doc/api/*.md or
perl -pi -e "s/REPLACEME/$VERSION/g" doc/api/*.md.
The CHANGELOG.md, doc/changelogs/CHANGELOG_*.md, src/node_version.h, and
REPLACEME changes should be the final commit that will be tagged for the
release. When committing these to git, use the following message format:
YYYY-MM-DD, Version x.y.z (Release Type)
Notable changes:
* Copy the notable changes list here, reformatted for plain-textPush the release branch to nodejs/node, not to your own fork. This allows release branches to more easily be passed between members of the release team if necessary.
Create a pull request targeting the correct release line. For example, a v5.3.0-proposal PR should target v5.x, not master. Paste the CHANGELOG modifications into the body of the PR so that collaborators can see what is changing. These PRs should be left open for at least 24 hours, and can be updated as new commits land.
If you need any additional information about any of the commits, this PR is a good place to @-mention the relevant contributors.
This is also a good time to update the release commit to include PR-URL metadata.
Run a node-test-pull-request test run to ensure that the build is stable and the HEAD commit is ready for release.
Perform some smoke-testing. We have citgm for this. You can also manually test important modules from the ecosystem. Remember that node-gyp and npm both take a --nodedir flag to point to your local repository so that you can test unreleased versions without needing node-gyp to download headers for you.
If there is a reason to produce a test release for the purpose of having others try out installers or specifics of builds, produce a nightly build using iojs+release and wait for it to drop in https://nodejs.org/download/nightly/. Follow the directions and enter a proper length commit SHA, enter a date string, and select "nightly" for "disttype".
This is particularly recommended if there has been recent work relating to the macOS or Windows installers as they are not tested in any way by CI.
Use iojs+release to produce release artifacts. Enter the commit that you want to build from and select "release" for "disttype".
Artifacts from each worker are uploaded to Jenkins and are available if further testing is required. Use this opportunity particularly to test macOS and Windows installers if there are any concerns. Click through to the individual workers for a run to find the artifacts.
All release workers should achieve "SUCCESS" (and be green, not red). A release with failures should not be promoted as there are likely problems to be investigated.
You can rebuild the release as many times as you need prior to promoting them if you encounter problems.
If you have an error on Windows and need to start again, be aware that you'll get immediate failure unless you wait up to 2 minutes for the linker to stop from previous jobs. i.e. if a build fails after having started compiling, that worker will still have a linker process that's running for another couple of minutes which will prevent Jenkins from clearing the workspace to start a new one. This isn't a big deal, it's just a hassle because it'll result in another failed build if you start again!
ARMv7 takes the longest to compile. Unfortunately ccache isn't as effective on release builds, I think it's because of the additional macro settings that go in to a release build that nullify previous builds. Also most of the release build machines are separate to the test build machines so they don't get any benefit from ongoing compiles between releases. You can expect 1.5 hours for the ARMv7 builder to complete and you should normally wait for this to finish. It is possible to rush a release out if you want and add additional builds later but we normally provide ARMv7 from initial promotion.
You do not have to wait for the ARMv6 / Raspberry PI builds if they take longer than the others. It is only necessary to have the main Linux (x64 and x86), macOS .pkg and .tar.gz, Windows (x64 and x86) .msi and .exe, source, headers and docs (both produced currently by an macOS worker). If you promote builds before ARM builds have finished, you must repeat the promotion step for the ARM builds when they are ready.
Jenkins collects the artifacts from the builds, allowing you to download and install the new build. Make sure that the build appears correct. Check the version numbers, and perform some basic checks to confirm that all is well with the build before moving forward.
Once you have produced builds that you're happy with, create a new tag. By waiting until this stage to create tags, you can discard a proposed release if something goes wrong or additional commits are required. Once you have created a tag and pushed it to GitHub, you should not delete and re-tag. If you make a mistake after tagging then you'll have to version-bump and start again and count that tag/version as lost.
Tag summaries have a predictable format, look at a recent tag to see, git tag -v v6.0.0. The message should look something like 2016-04-26 Node.js v6.0.0 (Current) Release.
Install git-secure-tag npm module:
$ npm install -g git-secure-tagCreate a tag using the following command:
$ git secure-tag <vx.y.z> <commit-sha> -sm 'YYYY-MM-DD Node.js vx.y.z (Release Type) Release'The tag must be signed using the GPG key that's listed for you on the project README.
Push the tag to the repo before you promote the builds. If you haven't pushed your tag first, then build promotion won't work properly. Push the tag using the following command:
$ git push <remote> <vx.y.z>On release proposal branch, edit src/node_version.h again and:
- Increment
NODE_PATCH_VERSIONby one - Change
NODE_VERSION_IS_RELEASEback to0
Commit this change with the following commit message format:
Working on vx.y.z # where 'z' is the incremented patch number
PR-URL: <full URL to your release proposal PR>This sets up the branch so that nightly builds are produced with the next version number and a pre-release tag.
Merge your release proposal branch into the stable branch that you are releasing from (e.g. v8.x), and rebase the corresponding staging branch (v8.x-staging) on top of that.
Cherry-pick the release commit to master. After cherry-picking, edit src/node_version.h to ensure the version macros contain whatever values were previously on master. NODE_VERSION_IS_RELEASE should be 0.
It is important that the same individual who signed the release tag be the one to promote the builds as the SHASUMS256.txt file needs to be signed with the same GPG key!
Use tools/release.sh to promote and sign the build. When run, it will perform the following actions:
a. Select a GPG key from your private keys. It will use a command similar to: gpg --list-secret-keys to list your keys. If you don't have any keys, it will bail. (Why are you releasing? Your tag should be signed!) If you have only one key, it will use that. If you have more than one key it will ask you to select one from the list. Be sure to use the same key that you signed your git tag with.
b. Log in to the server via SSH and check for releases that can be promoted, along with the list of artifacts. It will use the dist-promotable command on the server to find these. You will be asked, for each promotable release, whether you want to proceed. If there is more than one release to promote (there shouldn't be), be sure to only promote the release you are responsible for.
c. Log in to the server via SSH and run the promote script for the given release. The command on the server will be similar to: dist-promote vx.y.z. After this step, the release artifacts will be available for download and a SHASUMS256.txt file will be present. The release will still be unsigned, however.
d. Use scp to download SHASUMS256.txt to a temporary directory on your computer.
e. Sign the SHASUMS256.txt file using a command similar to: gpg --default-key YOURKEY --clearsign /path/to/SHASUMS256.txt. You will be prompted by GPG for your password. The signed file will be named SHASUMS256.txt.asc.
f. Output an ASCII armored version of your public GPG key using a command similar to: gpg --default-key YOURKEY --armor --export --output /path/to/SHASUMS256.txt.gpg. This does not require your password and is mainly a convenience for users, although not the recommended way to get a copy of your key.
g. Upload the SHASUMS256.txt files back to the server into the release directory.
If you didn't wait for ARM builds in the previous step before promoting the release, you should re-run tools/release.sh after the ARM builds have finished. That will move the ARM artifacts into the correct location. You will be prompted to re-sign SHASUMS256.txt.
Note: it is possible to only sign a release by running ./tools/release.sh -s vX.Y.Z.
Your release should be available at https://nodejs.org/dist/vx.y.z/ and https://nodejs.org/dist/latest/. Check that the appropriate files are in place. You may want to check that the binaries are working as appropriate and have the right internal version strings. Check that the API docs are available at https://nodejs.org/api/. Check that the release catalog files are correct at https://nodejs.org/dist/index.tab and https://nodejs.org/dist/index.json.
There is an automatic build that is kicked off when you promote new builds, so within a few minutes nodejs.org will be listing your new version as the latest release. However, the blog post is not yet fully automatic.
Create a new blog post by running the nodejs.org release-post.js script. This script will use the promoted builds and changelog to generate the post. Run npm run serve to preview the post locally before pushing to the nodejs.org repo.
- You can add a short blurb just under the main heading if you want to say something important, otherwise the text should be publication ready.
- The links to the download files won't be complete unless you waited for the ARMv6 builds. Any downloads that are missing will have
*Coming soon*next to them. It's your responsibility to manually update these later when you have the outstanding builds. - The SHASUMS256.txt.asc content is at the bottom of the post. When you update the list of tarballs you'll need to copy/paste the new contents of this file to reflect those changes.
- Always use pull-requests on the nodejs.org repo. Be respectful of that working group, but you shouldn't have to wait for PR sign-off. Opening a PR and merging it immediately should be fine. However, please follow the following commit message format:
Blog: vX.Y.Z release post
Refs: <full URL to your release proposal PR>
- Changes to
masteron the nodejs.org repo will trigger a new build of nodejs.org so your changes should appear in a few minutes after pushing.
The nodejs.org website will automatically rebuild and include the new version. To announce the build on Twitter through the official @nodejs account, email pr@nodejs.org with a message such as:
v5.8.0 of @nodejs is out: https://nodejs.org/en/blog/release/v5.8.0/ … something here about notable changes
To ensure communication goes out with the timing of the blog post, please allow 24 hour prior notice. If known, please include the date and time the release will be shared with the community in the email to coordinate these announcements.
Close your release proposal PR and remove the proposal branch.
In whatever form you do this...