Skip to content
Find file
Fetching contributors…
Cannot retrieve contributors at this time
2469 lines (1834 sloc) 133 KB
commit eb66d8176b3d1f560ee012e1b488cb1540c45f88
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 16:10:47 2015 +0200
Initialized members of SnappyArrayWriter and SnappyDecompressionValidator.
These members were almost surely initialized before use by other member
functions, but Coverity was warning about this. Eliminating these warnings
minimizes clutter in that report and the likelihood of overlooking a real bug.
A=cmumford
R=jeff
commit b2312c4c25883ab03b5110f1b006dce95f419a4f
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 16:03:28 2015 +0200
Add support for Uncompress(source, sink). Various changes to allow
Uncompress(source, sink) to get the same performance as the different
variants of Uncompress to Cord/DataBuffer/String/FlatBuffer.
Changes to efficiently support Uncompress(source, sink)
--------
a) For strings - we add support to StringByteSink to do GetAppendBuffer so we
can write to it without copying.
b) For flat array buffers, we do GetAppendBuffer and see if we can get a full buffer.
With the above changes we get performance with ByteSource/ByteSink
that is very close to directly using flat arrays and strings.
We add various benchmark cases to demonstrate that.
Orthogonal change
------------------
Add support for TryFastAppend() for SnappyScatteredWriter.
Benchmark results are below
CPU: Intel Core2 dL1:32KB dL2:4096KB
Benchmark Time(ns) CPU(ns) Iterations
-----------------------------------------------------
BM_UFlat/0 109065 108996 6410 896.0MB/s html
BM_UFlat/1 1012175 1012343 691 661.4MB/s urls
BM_UFlat/2 26775 26771 26149 4.4GB/s jpg
BM_UFlat/3 48947 48940 14363 1.8GB/s pdf
BM_UFlat/4 441029 440835 1589 886.1MB/s html4
BM_UFlat/5 39861 39880 17823 588.3MB/s cp
BM_UFlat/6 18315 18300 38126 581.1MB/s c
BM_UFlat/7 5254 5254 100000 675.4MB/s lsp
BM_UFlat/8 1568060 1567376 447 626.6MB/s xls
BM_UFlat/9 337512 337734 2073 429.5MB/s txt1
BM_UFlat/10 287269 287054 2434 415.9MB/s txt2
BM_UFlat/11 890098 890219 787 457.2MB/s txt3
BM_UFlat/12 1186593 1186863 590 387.2MB/s txt4
BM_UFlat/13 573927 573318 1000 853.7MB/s bin
BM_UFlat/14 64250 64294 10000 567.2MB/s sum
BM_UFlat/15 7301 7300 96153 552.2MB/s man
BM_UFlat/16 109617 109636 6375 1031.5MB/s pb
BM_UFlat/17 364438 364497 1921 482.3MB/s gaviota
BM_UFlatSink/0 108518 108465 6450 900.4MB/s html
BM_UFlatSink/1 991952 991997 705 675.0MB/s urls
BM_UFlatSink/2 26815 26798 26065 4.4GB/s jpg
BM_UFlatSink/3 49127 49122 14255 1.8GB/s pdf
BM_UFlatSink/4 436674 436731 1604 894.4MB/s html4
BM_UFlatSink/5 39738 39733 17345 590.5MB/s cp
BM_UFlatSink/6 18413 18416 37962 577.4MB/s c
BM_UFlatSink/7 5677 5676 100000 625.2MB/s lsp
BM_UFlatSink/8 1552175 1551026 451 633.2MB/s xls
BM_UFlatSink/9 338526 338489 2065 428.5MB/s txt1
BM_UFlatSink/10 289387 289307 2420 412.6MB/s txt2
BM_UFlatSink/11 893803 893706 783 455.4MB/s txt3
BM_UFlatSink/12 1195919 1195459 586 384.4MB/s txt4
BM_UFlatSink/13 559637 559779 1000 874.3MB/s bin
BM_UFlatSink/14 65073 65094 10000 560.2MB/s sum
BM_UFlatSink/15 7618 7614 92823 529.5MB/s man
BM_UFlatSink/16 110085 110121 6352 1027.0MB/s pb
BM_UFlatSink/17 369196 368915 1896 476.5MB/s gaviota
BM_UValidate/0 46954 46957 14899 2.0GB/s html
BM_UValidate/1 500621 500868 1000 1.3GB/s urls
BM_UValidate/2 283 283 2481447 417.2GB/s jpg
BM_UValidate/3 16230 16228 43137 5.4GB/s pdf
BM_UValidate/4 189129 189193 3701 2.0GB/s html4
A=uday
R=sanjay
commit b2ad96006741d40935db2f73194a3e489b467338
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 15:48:29 2015 +0200
Changes to eliminate compiler warnings on MSVC
This code was not compiling under Visual Studio 2013 with warnings being treated
as errors. Specifically:
1. Changed int -> size_t to eliminate signed/unsigned mismatch warning.
2. Added some missing return values to functions.
3. Inserting character instead of integer literals into strings to avoid type
conversions.
A=cmumford
R=jeff
commit e7a897e187e90b33f87bd9e64872cf561de9ebca
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 15:45:11 2015 +0200
Fixed unit tests to compile under MSVC.
1. Including config.h in test.
2. Including windows.h before zippy-test.h.
3. Removed definition of WIN32_LEAN_AND_MEAN. This caused problems in
build environments that define WIN32_LEAN_AND_MEAN as our
definition didn't check for prior existence. This constant is old
and no longer needed anyhow.
4. Disable MSVC warning 4722 since ~LogMessageCrash() never returns.
A=cmumford
R=jeff
commit 86eb8b152bdb065ad11bf331a9f7d65b72616acf
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 15:41:30 2015 +0200
Change a few branch annotations that profiling found to be wrong.
Overall performance is neutral or slightly positive.
Westmere (64-bit, opt):
Benchmark Base (ns) New (ns) Improvement
--------------------------------------------------------------------------------------
BM_UFlat/0 73798 71464 1.3GB/s html +3.3%
BM_UFlat/1 715223 704318 953.5MB/s urls +1.5%
BM_UFlat/2 8137 8871 13.0GB/s jpg -8.3%
BM_UFlat/3 200 204 935.5MB/s jpg_200 -2.0%
BM_UFlat/4 21627 21281 4.5GB/s pdf +1.6%
BM_UFlat/5 302806 290350 1.3GB/s html4 +4.3%
BM_UFlat/6 218920 219017 664.1MB/s txt1 -0.0%
BM_UFlat/7 190437 191212 626.1MB/s txt2 -0.4%
BM_UFlat/8 584192 580484 703.4MB/s txt3 +0.6%
BM_UFlat/9 776537 779055 591.6MB/s txt4 -0.3%
BM_UFlat/10 76056 72606 1.5GB/s pb +4.8%
BM_UFlat/11 235962 239043 737.4MB/s gaviota -1.3%
BM_UFlat/12 28049 28000 840.1MB/s cp +0.2%
BM_UFlat/13 12225 12021 886.9MB/s c +1.7%
BM_UFlat/14 3362 3544 1004.0MB/s lsp -5.1%
BM_UFlat/15 937015 939206 1048.9MB/s xls -0.2%
BM_UFlat/16 236 233 823.1MB/s xls_200 +1.3%
BM_UFlat/17 373170 361947 1.3GB/s bin +3.1%
BM_UFlat/18 264 264 725.5MB/s bin_200 +0.0%
BM_UFlat/19 42834 43577 839.2MB/s sum -1.7%
BM_UFlat/20 4770 4736 853.6MB/s man +0.7%
BM_UValidate/0 39671 39944 2.4GB/s html -0.7%
BM_UValidate/1 443391 443391 1.5GB/s urls +0.0%
BM_UValidate/2 163 163 703.3GB/s jpg +0.0%
BM_UValidate/3 113 112 1.7GB/s jpg_200 +0.9%
BM_UValidate/4 7555 7608 12.6GB/s pdf -0.7%
BM_ZFlat/0 157616 157568 621.5MB/s html (22.31 %) +0.0%
BM_ZFlat/1 1997290 2014486 333.4MB/s urls (47.77 %) -0.9%
BM_ZFlat/2 23035 22237 5.2GB/s jpg (99.95 %) +3.6%
BM_ZFlat/3 539 540 354.5MB/s jpg_200 (73.00 %) -0.2%
BM_ZFlat/4 80709 81369 1.2GB/s pdf (81.85 %) -0.8%
BM_ZFlat/5 639059 639220 613.0MB/s html4 (22.51 %) -0.0%
BM_ZFlat/6 577203 583370 249.3MB/s txt1 (57.87 %) -1.1%
BM_ZFlat/7 510887 516094 232.0MB/s txt2 (61.93 %) -1.0%
BM_ZFlat/8 1535843 1556973 262.2MB/s txt3 (54.92 %) -1.4%
BM_ZFlat/9 2070068 2102380 219.3MB/s txt4 (66.22 %) -1.5%
BM_ZFlat/10 152396 152148 745.5MB/s pb (19.64 %) +0.2%
BM_ZFlat/11 447367 445859 395.4MB/s gaviota (37.72 %) +0.3%
BM_ZFlat/12 76375 76797 306.3MB/s cp (48.12 %) -0.5%
BM_ZFlat/13 31518 31987 333.3MB/s c (42.40 %) -1.5%
BM_ZFlat/14 10598 10827 328.6MB/s lsp (48.37 %) -2.1%
BM_ZFlat/15 1782243 1802728 546.5MB/s xls (41.23 %) -1.1%
BM_ZFlat/16 526 539 355.0MB/s xls_200 (78.00 %) -2.4%
BM_ZFlat/17 598141 597311 822.1MB/s bin (18.11 %) +0.1%
BM_ZFlat/18 121 120 1.6GB/s bin_200 (7.50 %) +0.8%
BM_ZFlat/19 109981 112173 326.0MB/s sum (48.96 %) -2.0%
BM_ZFlat/20 14355 14575 277.4MB/s man (59.36 %) -1.5%
Sum of all benchmarks 33882722 33879325 +0.0%
Sandy Bridge (64-bit, opt):
Benchmark Base (ns) New (ns) Improvement
--------------------------------------------------------------------------------------
BM_UFlat/0 43764 41600 2.3GB/s html +5.2%
BM_UFlat/1 517990 507058 1.3GB/s urls +2.2%
BM_UFlat/2 6625 5529 20.8GB/s jpg +19.8%
BM_UFlat/3 154 155 1.2GB/s jpg_200 -0.6%
BM_UFlat/4 12795 11747 8.1GB/s pdf +8.9%
BM_UFlat/5 200335 193413 2.0GB/s html4 +3.6%
BM_UFlat/6 156574 156426 929.2MB/s txt1 +0.1%
BM_UFlat/7 137574 137464 870.4MB/s txt2 +0.1%
BM_UFlat/8 422551 421603 967.4MB/s txt3 +0.2%
BM_UFlat/9 577749 578985 795.6MB/s txt4 -0.2%
BM_UFlat/10 42329 39362 2.8GB/s pb +7.5%
BM_UFlat/11 170615 169751 1037.9MB/s gaviota +0.5%
BM_UFlat/12 12800 12719 1.8GB/s cp +0.6%
BM_UFlat/13 6585 6579 1.6GB/s c +0.1%
BM_UFlat/14 2066 2044 1.7GB/s lsp +1.1%
BM_UFlat/15 750861 746911 1.3GB/s xls +0.5%
BM_UFlat/16 188 192 996.0MB/s xls_200 -2.1%
BM_UFlat/17 271622 264333 1.8GB/s bin +2.8%
BM_UFlat/18 208 207 923.6MB/s bin_200 +0.5%
BM_UFlat/19 24667 24845 1.4GB/s sum -0.7%
BM_UFlat/20 2663 2662 1.5GB/s man +0.0%
BM_ZFlat/0 115173 115624 846.5MB/s html (22.31 %) -0.4%
BM_ZFlat/1 1530331 1537769 436.5MB/s urls (47.77 %) -0.5%
BM_ZFlat/2 17503 17013 6.8GB/s jpg (99.95 %) +2.9%
BM_ZFlat/3 385 385 496.3MB/s jpg_200 (73.00 %) +0.0%
BM_ZFlat/4 61753 61540 1.6GB/s pdf (81.85 %) +0.3%
BM_ZFlat/5 484806 483356 810.1MB/s html4 (22.51 %) +0.3%
BM_ZFlat/6 464143 467609 310.9MB/s txt1 (57.87 %) -0.7%
BM_ZFlat/7 410315 413319 289.5MB/s txt2 (61.93 %) -0.7%
BM_ZFlat/8 1244082 1249381 326.5MB/s txt3 (54.92 %) -0.4%
BM_ZFlat/9 1696914 1709685 269.4MB/s txt4 (66.22 %) -0.7%
BM_ZFlat/10 104148 103372 1096.7MB/s pb (19.64 %) +0.8%
BM_ZFlat/11 363522 359722 489.8MB/s gaviota (37.72 %) +1.1%
BM_ZFlat/12 47021 50095 469.3MB/s cp (48.12 %) -6.1%
BM_ZFlat/13 16888 16985 627.4MB/s c (42.40 %) -0.6%
BM_ZFlat/14 5496 5469 650.3MB/s lsp (48.37 %) +0.5%
BM_ZFlat/15 1460713 1448760 679.5MB/s xls (41.23 %) +0.8%
BM_ZFlat/16 387 393 486.8MB/s xls_200 (78.00 %) -1.5%
BM_ZFlat/17 457654 451462 1086.6MB/s bin (18.11 %) +1.4%
BM_ZFlat/18 97 87 2.1GB/s bin_200 (7.50 %) +11.5%
BM_ZFlat/19 77904 80924 451.7MB/s sum (48.96 %) -3.7%
BM_ZFlat/20 7648 7663 527.1MB/s man (59.36 %) -0.2%
Sum of all benchmarks 25493635 25482069 +0.0%
A=dehao
R=sesse
commit 11ccdfb868387e56d845766d89ddab9d489c4128
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 16:07:58 2015 +0200
Sync with various Google-internal changes.
Should not mean much for the open-source version.
commit 22acaf438ed93ab21a2ff1919d173206798b996e
Author: Steinar H. Gunderson <sesse@google.com>
Date: Mon Jun 22 15:39:08 2015 +0200
Change some internal path names.
This is mostly to sync up with some changes from Google's internal
repositories; it does not affect the open-source distribution in itself.
commit 1ff9be9b8fafc8528ca9e055646f5932aa5db9c4
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Feb 28 11:18:07 2014 +0000
Release Snappy 1.1.2.
R=jeff
git-svn-id: https://snappy.googlecode.com/svn/trunk@84 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 19690d78e83f8963f497585031efa3d9ca66b807
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Feb 19 10:31:49 2014 +0000
Fix public issue 82: Stop distributing benchmark data files that have
unclear or unsuitable licensing.
In general, we replace the files we can with liberally licensed data,
and remove all the others (in particular all the parts of the Canterbury
corpus that are not clearly in the public domain). The replacements
do not always have the exact same characteristics as the original ones,
but they are more than good enough to be useful for benchmarking.
git-svn-id: https://snappy.googlecode.com/svn/trunk@83 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f82bff66afe0de4c9ae22f8c4ef84e3c2233e799
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Oct 25 13:31:27 2013 +0000
Add support for padding in the Snappy framed format.
This is specifically motivated by DICOM's demands that embedded data
must be of an even number of bytes, but could in principle be used for
any sort of padding/alignment needed.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@82 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit eeead8dc38ea359f027fb6e89f345448e8e9d723
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Oct 15 15:21:31 2013 +0000
Release Snappy 1.1.1.
R=jeff
git-svn-id: https://snappy.googlecode.com/svn/trunk@81 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 6bc39e24c76adbbff26ae629fafbf7dfc795f554
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Aug 13 12:55:00 2013 +0000
Add autoconf tests for size_t and ssize_t. Sort-of resolves public issue 79;
it would solve the problem if MSVC typically used autoconf. However, it gives
a natural place (config.h) to put the typedef even for MSVC.
R=jsbell
git-svn-id: https://snappy.googlecode.com/svn/trunk@80 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 7c3c01df77e191ad1f8377448961fe88db2802e9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon Jul 29 11:06:44 2013 +0000
When we compare the number of bytes produced with the offset for a
backreference, make the signedness of the bytes produced clear,
by sticking it into a size_t. This avoids a signed/unsigned compare
warning from MSVC (public issue 71), and also is slightly clearer.
Since the line is now so long the explanatory comment about the -1u
trick has to go somewhere else anyway, I used the opportunity to
explain it in slightly more detail.
This is a purely stylistic change; the emitted assembler from GCC
is identical.
R=jeff
git-svn-id: https://snappy.googlecode.com/svn/trunk@79 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 2f0aaf8631d8fb2475ca1a6687c181efb14ed286
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sun Jun 30 19:24:03 2013 +0000
In the fast path for decompressing literals, instead of checking
whether there's 16 bytes free and then checking right afterwards
(when having subtracted the literal size) that there are now
5 bytes free, just check once for 21 bytes. This skips a compare
and a branch; although it is easily predictable, it is still
a few cycles on a fast path that we would like to get rid of.
Benchmarking this yields very confusing results. On open-source
GCC 4.8.1 on Haswell, we get exactly the expected results; the
benchmarks where we hit the fast path for literals (in particular
the two HTML benchmarks and the protobuf benchmark) give very nice
speedups, and the others are not really affected.
However, benchmarks with Google's GCC branch on other hardware
is much less clear. It seems that we have a weak loss in some cases
(and the win for the “typical” win cases are not nearly as clear),
but that it depends on microarchitecture and plain luck in how we run
the benchmark. Looking at the generated assembler, it seems that
the removal of the if causes other large-scale changes in how the
function is laid out, which makes it likely that this is just bad luck.
Thus, we should keep this change, even though its exact current impact is
unclear; it's a sensible change per se, and dropping it on the basis of
microoptimization for a given compiler (or even branch of a compiler)
would seem like a bad strategy in the long run.
Microbenchmark results (all in 64-bit, opt mode):
Nehalem, Google GCC:
Benchmark Base (ns) New (ns) Improvement
------------------------------------------------------------------------------
BM_UFlat/0 76747 75591 1.3GB/s html +1.5%
BM_UFlat/1 765756 757040 886.3MB/s urls +1.2%
BM_UFlat/2 10867 10893 10.9GB/s jpg -0.2%
BM_UFlat/3 124 131 1.4GB/s jpg_200 -5.3%
BM_UFlat/4 31663 31596 2.8GB/s pdf +0.2%
BM_UFlat/5 314162 308176 1.2GB/s html4 +1.9%
BM_UFlat/6 29668 29746 790.6MB/s cp -0.3%
BM_UFlat/7 12958 13386 796.4MB/s c -3.2%
BM_UFlat/8 3596 3682 966.0MB/s lsp -2.3%
BM_UFlat/9 1019193 1033493 953.3MB/s xls -1.4%
BM_UFlat/10 239 247 775.3MB/s xls_200 -3.2%
BM_UFlat/11 236411 240271 606.9MB/s txt1 -1.6%
BM_UFlat/12 206639 209768 571.2MB/s txt2 -1.5%
BM_UFlat/13 627803 635722 641.4MB/s txt3 -1.2%
BM_UFlat/14 845932 857816 538.2MB/s txt4 -1.4%
BM_UFlat/15 402107 391670 1.2GB/s bin +2.7%
BM_UFlat/16 283 279 683.6MB/s bin_200 +1.4%
BM_UFlat/17 46070 46815 781.5MB/s sum -1.6%
BM_UFlat/18 5053 5163 782.0MB/s man -2.1%
BM_UFlat/19 79721 76581 1.4GB/s pb +4.1%
BM_UFlat/20 251158 252330 697.5MB/s gaviota -0.5%
Sum of all benchmarks 4966150 4980396 -0.3%
Sandy Bridge, Google GCC:
Benchmark Base (ns) New (ns) Improvement
------------------------------------------------------------------------------
BM_UFlat/0 42850 42182 2.3GB/s html +1.6%
BM_UFlat/1 525660 515816 1.3GB/s urls +1.9%
BM_UFlat/2 7173 7283 16.3GB/s jpg -1.5%
BM_UFlat/3 92 91 2.1GB/s jpg_200 +1.1%
BM_UFlat/4 15147 14872 5.9GB/s pdf +1.8%
BM_UFlat/5 199936 192116 2.0GB/s html4 +4.1%
BM_UFlat/6 12796 12443 1.8GB/s cp +2.8%
BM_UFlat/7 6588 6400 1.6GB/s c +2.9%
BM_UFlat/8 2010 1951 1.8GB/s lsp +3.0%
BM_UFlat/9 761124 763049 1.3GB/s xls -0.3%
BM_UFlat/10 186 189 1016.1MB/s xls_200 -1.6%
BM_UFlat/11 159354 158460 918.6MB/s txt1 +0.6%
BM_UFlat/12 139732 139950 856.1MB/s txt2 -0.2%
BM_UFlat/13 429917 425027 961.7MB/s txt3 +1.2%
BM_UFlat/14 585255 587324 785.8MB/s txt4 -0.4%
BM_UFlat/15 276186 266173 1.8GB/s bin +3.8%
BM_UFlat/16 205 207 925.5MB/s bin_200 -1.0%
BM_UFlat/17 24925 24935 1.4GB/s sum -0.0%
BM_UFlat/18 2632 2576 1.5GB/s man +2.2%
BM_UFlat/19 40546 39108 2.8GB/s pb +3.7%
BM_UFlat/20 175803 168209 1048.9MB/s gaviota +4.5%
Sum of all benchmarks 3408117 3368361 +1.2%
Haswell, upstream GCC 4.8.1:
Benchmark Base (ns) New (ns) Improvement
------------------------------------------------------------------------------
BM_UFlat/0 46308 40641 2.3GB/s html +13.9%
BM_UFlat/1 513385 514706 1.3GB/s urls -0.3%
BM_UFlat/2 6197 6151 19.2GB/s jpg +0.7%
BM_UFlat/3 61 61 3.0GB/s jpg_200 +0.0%
BM_UFlat/4 13551 13429 6.5GB/s pdf +0.9%
BM_UFlat/5 198317 190243 2.0GB/s html4 +4.2%
BM_UFlat/6 14768 12560 1.8GB/s cp +17.6%
BM_UFlat/7 6453 6447 1.6GB/s c +0.1%
BM_UFlat/8 1991 1980 1.8GB/s lsp +0.6%
BM_UFlat/9 766947 770424 1.2GB/s xls -0.5%
BM_UFlat/10 170 169 1.1GB/s xls_200 +0.6%
BM_UFlat/11 164350 163554 888.7MB/s txt1 +0.5%
BM_UFlat/12 145444 143830 832.1MB/s txt2 +1.1%
BM_UFlat/13 437849 438413 929.2MB/s txt3 -0.1%
BM_UFlat/14 603587 605309 759.8MB/s txt4 -0.3%
BM_UFlat/15 249799 248067 1.9GB/s bin +0.7%
BM_UFlat/16 191 188 1011.4MB/s bin_200 +1.6%
BM_UFlat/17 26064 24778 1.4GB/s sum +5.2%
BM_UFlat/18 2620 2601 1.5GB/s man +0.7%
BM_UFlat/19 44551 37373 3.0GB/s pb +19.2%
BM_UFlat/20 165408 164584 1.0GB/s gaviota +0.5%
Sum of all benchmarks 3408011 3385508 +0.7%
git-svn-id: https://snappy.googlecode.com/svn/trunk@78 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 062bf544a61107db730b6d08cb0b159c4dd9b24c
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Jun 14 21:42:26 2013 +0000
Make the two IncrementalCopy* functions take in an ssize_t instead of a len,
in order to avoid having to do 32-to-64-bit signed conversions on a hot path
during decompression. (Also fixes some MSVC warnings, mentioned in public
issue 75, but more of those remain.) They cannot be size_t because we expect
them to go negative and test for that.
This saves a few movzwl instructions, yielding ~2% speedup in decompression.
Sandy Bridge:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 48009 41283 2.3GB/s html +16.3%
BM_UFlat/1 531274 513419 1.3GB/s urls +3.5%
BM_UFlat/2 7378 7062 16.8GB/s jpg +4.5%
BM_UFlat/3 92 92 2.0GB/s jpg_200 +0.0%
BM_UFlat/4 15057 14974 5.9GB/s pdf +0.6%
BM_UFlat/5 204323 193140 2.0GB/s html4 +5.8%
BM_UFlat/6 13282 12611 1.8GB/s cp +5.3%
BM_UFlat/7 6511 6504 1.6GB/s c +0.1%
BM_UFlat/8 2014 2030 1.7GB/s lsp -0.8%
BM_UFlat/9 775909 768336 1.3GB/s xls +1.0%
BM_UFlat/10 182 184 1043.2MB/s xls_200 -1.1%
BM_UFlat/11 167352 161630 901.2MB/s txt1 +3.5%
BM_UFlat/12 147393 142246 842.8MB/s txt2 +3.6%
BM_UFlat/13 449960 432853 944.4MB/s txt3 +4.0%
BM_UFlat/14 620497 594845 775.9MB/s txt4 +4.3%
BM_UFlat/15 265610 267356 1.8GB/s bin -0.7%
BM_UFlat/16 206 205 932.7MB/s bin_200 +0.5%
BM_UFlat/17 25561 24730 1.4GB/s sum +3.4%
BM_UFlat/18 2620 2644 1.5GB/s man -0.9%
BM_UFlat/19 45766 38589 2.9GB/s pb +18.6%
BM_UFlat/20 171107 169832 1039.5MB/s gaviota +0.8%
Sum of all benchmarks 3500103 3394565 +3.1%
Westmere:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 72624 71526 1.3GB/s html +1.5%
BM_UFlat/1 735821 722917 930.8MB/s urls +1.8%
BM_UFlat/2 10450 10172 11.7GB/s jpg +2.7%
BM_UFlat/3 117 117 1.6GB/s jpg_200 +0.0%
BM_UFlat/4 29817 29648 3.0GB/s pdf +0.6%
BM_UFlat/5 297126 293073 1.3GB/s html4 +1.4%
BM_UFlat/6 28252 27994 842.0MB/s cp +0.9%
BM_UFlat/7 12672 12391 862.1MB/s c +2.3%
BM_UFlat/8 3507 3425 1040.9MB/s lsp +2.4%
BM_UFlat/9 1004268 969395 1018.0MB/s xls +3.6%
BM_UFlat/10 233 227 844.8MB/s xls_200 +2.6%
BM_UFlat/11 230054 224981 647.8MB/s txt1 +2.3%
BM_UFlat/12 201229 196447 610.5MB/s txt2 +2.4%
BM_UFlat/13 609547 596761 685.3MB/s txt3 +2.1%
BM_UFlat/14 824362 804821 573.8MB/s txt4 +2.4%
BM_UFlat/15 371095 374899 1.3GB/s bin -1.0%
BM_UFlat/16 267 267 717.8MB/s bin_200 +0.0%
BM_UFlat/17 44623 43828 835.9MB/s sum +1.8%
BM_UFlat/18 5077 4815 841.0MB/s man +5.4%
BM_UFlat/19 74964 73210 1.5GB/s pb +2.4%
BM_UFlat/20 237987 236745 746.0MB/s gaviota +0.5%
Sum of all benchmarks 4794092 4697659 +2.1%
Istanbul:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 98614 96376 1020.4MB/s html +2.3%
BM_UFlat/1 963740 953241 707.2MB/s urls +1.1%
BM_UFlat/2 25042 24769 4.8GB/s jpg +1.1%
BM_UFlat/3 180 180 1065.6MB/s jpg_200 +0.0%
BM_UFlat/4 45942 45403 1.9GB/s pdf +1.2%
BM_UFlat/5 400135 390226 1008.2MB/s html4 +2.5%
BM_UFlat/6 37768 37392 631.9MB/s cp +1.0%
BM_UFlat/7 18585 18200 588.2MB/s c +2.1%
BM_UFlat/8 5751 5690 627.7MB/s lsp +1.1%
BM_UFlat/9 1543154 1542209 641.4MB/s xls +0.1%
BM_UFlat/10 381 388 494.6MB/s xls_200 -1.8%
BM_UFlat/11 339715 331973 440.1MB/s txt1 +2.3%
BM_UFlat/12 294807 289418 415.4MB/s txt2 +1.9%
BM_UFlat/13 906160 884094 463.3MB/s txt3 +2.5%
BM_UFlat/14 1224221 1198435 386.1MB/s txt4 +2.2%
BM_UFlat/15 516277 502923 979.5MB/s bin +2.7%
BM_UFlat/16 405 402 477.2MB/s bin_200 +0.7%
BM_UFlat/17 61640 60621 605.6MB/s sum +1.7%
BM_UFlat/18 7326 7383 549.5MB/s man -0.8%
BM_UFlat/19 94720 92653 1.2GB/s pb +2.2%
BM_UFlat/20 360435 346687 510.6MB/s gaviota +4.0%
Sum of all benchmarks 6944998 6828663 +1.7%
git-svn-id: https://snappy.googlecode.com/svn/trunk@77 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 328aafa1980824a9afdcd50edc30d9d5157e417f
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Jun 13 16:19:52 2013 +0000
Add support for uncompressing to iovecs (scatter I/O).
Windows does not have struct iovec defined anywhere,
so we define our own version that's equal to what UNIX
typically has.
The bulk of this patch was contributed by Mohit Aron.
R=jeff
git-svn-id: https://snappy.googlecode.com/svn/trunk@76 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit cd92eb0852e2339187b693eef3595a07d2276c1d
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Jun 12 19:51:15 2013 +0000
Some code reorganization needed for an internal change.
R=fikes
git-svn-id: https://snappy.googlecode.com/svn/trunk@75 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit a3e928d62bbd61b523b988c07b560253950cf73b
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Apr 9 15:33:30 2013 +0000
Supports truncated test data in zippy benchmark.
R=sesse
git-svn-id: https://snappy.googlecode.com/svn/trunk@74 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit bde324c0169763688f35ee44630a26ad1f49eec3
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Feb 5 14:36:15 2013 +0000
Release Snappy 1.1.0.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@73 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 8168446c7eaaa0594e1f4ca923376dcf3a2846fa
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Feb 5 14:30:05 2013 +0000
Make ./snappy_unittest pass without "srcdir" being defined.
Previously, snappy_unittests would read from an absolute path /testdata/..;
convert it to use a relative path instead.
Patch from Marc-Antonie Ruel.
R=maruel
git-svn-id: https://snappy.googlecode.com/svn/trunk@72 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 27a0cc394950ebdad2e8d67322f0862835b10bd9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Jan 18 12:16:36 2013 +0000
Increase the Zippy block size from 32 kB to 64 kB, winning ~3% density
while being effectively performance neutral.
The longer story about density is that we win 3-6% density on the benchmarks
where this has any effect at all; many of the benchmarks (cp, c, lsp, man)
are smaller than 32 kB and thus will have no effect. Binary data also seems
to win little or nothing; of course, the already-compressed data wins nothing.
The protobuf benchmark wins as much as ~18% depending on architecture,
but I wouldn't be too sure that this is representative of protobuf data in
general.
As of performance, we lose a tiny amount since we get more tags (e.g., a long
literal might be broken up into literal-copy-literal), but we win it back with
less clearing of the hash table, and more opportunities to skip incompressible
data (e.g. in the jpg benchmark). Decompression seems to get ever so slightly
slower, again due to more tags. The total net change is about as close to zero
as we can get, so the end effect seems to be simply more density and no
real performance change.
The comment about not changing kBlockSize, scary as it is, is not really
relevant, since we're never going to have a block-level decompressor without
explicitly marked blocks. Replace it with something more appropriate.
This affects the framing format, but it's okay to change it since it basically
has no users yet.
Density (note that cp, c, lsp and man are all smaller than 32 kB):
Benchmark Description Base (%) New (%) Improvement
--------------------------------------------------------------
ZFlat/0 html 22.57 22.31 +5.6%
ZFlat/1 urls 50.89 47.77 +6.5%
ZFlat/2 jpg 99.88 99.87 +0.0%
ZFlat/3 pdf 82.13 82.07 +0.1%
ZFlat/4 html4 23.55 22.51 +4.6%
ZFlat/5 cp 48.12 48.12 +0.0%
ZFlat/6 c 42.40 42.40 +0.0%
ZFlat/7 lsp 48.37 48.37 +0.0%
ZFlat/8 xls 41.34 41.23 +0.3%
ZFlat/9 txt1 59.81 57.87 +3.4%
ZFlat/10 txt2 64.07 61.93 +3.5%
ZFlat/11 txt3 57.11 54.92 +4.0%
ZFlat/12 txt4 68.35 66.22 +3.2%
ZFlat/13 bin 18.21 18.11 +0.6%
ZFlat/14 sum 51.88 48.96 +6.0%
ZFlat/15 man 59.36 59.36 +0.0%
ZFlat/16 pb 23.15 19.64 +17.9%
ZFlat/17 gaviota 38.27 37.72 +1.5%
Geometric mean 45.51 44.15 +3.1%
Microbenchmarks (64-bit, opt):
Westmere 2.8 GHz:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 75342 75027 1.3GB/s html +0.4%
BM_UFlat/1 723767 744269 899.6MB/s urls -2.8%
BM_UFlat/2 10072 10072 11.7GB/s jpg +0.0%
BM_UFlat/3 30747 30388 2.9GB/s pdf +1.2%
BM_UFlat/4 307353 306063 1.2GB/s html4 +0.4%
BM_UFlat/5 28593 28743 816.3MB/s cp -0.5%
BM_UFlat/6 12958 12998 818.1MB/s c -0.3%
BM_UFlat/7 3700 3792 935.8MB/s lsp -2.4%
BM_UFlat/8 999685 999905 982.1MB/s xls -0.0%
BM_UFlat/9 232954 230079 630.4MB/s txt1 +1.2%
BM_UFlat/10 200785 201468 592.6MB/s txt2 -0.3%
BM_UFlat/11 617267 610968 666.1MB/s txt3 +1.0%
BM_UFlat/12 821595 822475 558.7MB/s txt4 -0.1%
BM_UFlat/13 377097 377632 1.3GB/s bin -0.1%
BM_UFlat/14 45476 45260 805.8MB/s sum +0.5%
BM_UFlat/15 4985 5003 805.7MB/s man -0.4%
BM_UFlat/16 80813 77494 1.4GB/s pb +4.3%
BM_UFlat/17 251792 241553 727.7MB/s gaviota +4.2%
BM_UValidate/0 40343 40354 2.4GB/s html -0.0%
BM_UValidate/1 426890 451574 1.4GB/s urls -5.5%
BM_UValidate/2 187 179 661.9GB/s jpg +4.5%
BM_UValidate/3 13783 13827 6.4GB/s pdf -0.3%
BM_UValidate/4 162393 163335 2.3GB/s html4 -0.6%
BM_UDataBuffer/0 93756 93302 1046.7MB/s html +0.5%
BM_UDataBuffer/1 886714 916292 730.7MB/s urls -3.2%
BM_UDataBuffer/2 15861 16401 7.2GB/s jpg -3.3%
BM_UDataBuffer/3 38934 39224 2.2GB/s pdf -0.7%
BM_UDataBuffer/4 381008 379428 1029.5MB/s html4 +0.4%
BM_UCord/0 92528 91098 1072.0MB/s html +1.6%
BM_UCord/1 858421 885287 756.3MB/s urls -3.0%
BM_UCord/2 13140 13464 8.8GB/s jpg -2.4%
BM_UCord/3 39012 37773 2.3GB/s pdf +3.3%
BM_UCord/4 376869 371267 1052.1MB/s html4 +1.5%
BM_UCordString/0 75810 75303 1.3GB/s html +0.7%
BM_UCordString/1 735290 753841 888.2MB/s urls -2.5%
BM_UCordString/2 11945 13113 9.0GB/s jpg -8.9%
BM_UCordString/3 33901 32562 2.7GB/s pdf +4.1%
BM_UCordString/4 310985 309390 1.2GB/s html4 +0.5%
BM_UCordValidate/0 40952 40450 2.4GB/s html +1.2%
BM_UCordValidate/1 433842 456531 1.4GB/s urls -5.0%
BM_UCordValidate/2 1179 1173 100.8GB/s jpg +0.5%
BM_UCordValidate/3 14481 14392 6.1GB/s pdf +0.6%
BM_UCordValidate/4 164364 164151 2.3GB/s html4 +0.1%
BM_ZFlat/0 160610 156601 623.6MB/s html (22.31 %) +2.6%
BM_ZFlat/1 1995238 1993582 335.9MB/s urls (47.77 %) +0.1%
BM_ZFlat/2 30133 24983 4.7GB/s jpg (99.87 %) +20.6%
BM_ZFlat/3 74453 73128 1.2GB/s pdf (82.07 %) +1.8%
BM_ZFlat/4 647674 633729 616.4MB/s html4 (22.51 %) +2.2%
BM_ZFlat/5 76259 76090 308.4MB/s cp (48.12 %) +0.2%
BM_ZFlat/6 31106 31084 342.1MB/s c (42.40 %) +0.1%
BM_ZFlat/7 10507 10443 339.8MB/s lsp (48.37 %) +0.6%
BM_ZFlat/8 1811047 1793325 547.6MB/s xls (41.23 %) +1.0%
BM_ZFlat/9 597903 581793 249.3MB/s txt1 (57.87 %) +2.8%
BM_ZFlat/10 525320 514522 232.0MB/s txt2 (61.93 %) +2.1%
BM_ZFlat/11 1596591 1551636 262.3MB/s txt3 (54.92 %) +2.9%
BM_ZFlat/12 2134523 2094033 219.5MB/s txt4 (66.22 %) +1.9%
BM_ZFlat/13 593024 587869 832.6MB/s bin (18.11 %) +0.9%
BM_ZFlat/14 114746 110666 329.5MB/s sum (48.96 %) +3.7%
BM_ZFlat/15 14376 14485 278.3MB/s man (59.36 %) -0.8%
BM_ZFlat/16 167908 150070 753.6MB/s pb (19.64 %) +11.9%
BM_ZFlat/17 460228 442253 397.5MB/s gaviota (37.72 %) +4.1%
BM_ZCord/0 164896 160241 609.4MB/s html +2.9%
BM_ZCord/1 2070239 2043492 327.7MB/s urls +1.3%
BM_ZCord/2 54402 47002 2.5GB/s jpg +15.7%
BM_ZCord/3 85871 83832 1073.1MB/s pdf +2.4%
BM_ZCord/4 664078 648825 602.0MB/s html4 +2.4%
BM_ZDataBuffer/0 174874 172549 566.0MB/s html +1.3%
BM_ZDataBuffer/1 2134410 2139173 313.0MB/s urls -0.2%
BM_ZDataBuffer/2 71911 69551 1.7GB/s jpg +3.4%
BM_ZDataBuffer/3 98236 99727 902.1MB/s pdf -1.5%
BM_ZDataBuffer/4 710776 699104 558.8MB/s html4 +1.7%
Sum of all benchmarks 27358908 27200688 +0.6%
Sandy Bridge 2.6 GHz:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 49356 49018 1.9GB/s html +0.7%
BM_UFlat/1 516764 531955 1.2GB/s urls -2.9%
BM_UFlat/2 6982 7304 16.2GB/s jpg -4.4%
BM_UFlat/3 15285 15598 5.6GB/s pdf -2.0%
BM_UFlat/4 206557 206669 1.8GB/s html4 -0.1%
BM_UFlat/5 13681 13567 1.7GB/s cp +0.8%
BM_UFlat/6 6571 6592 1.6GB/s c -0.3%
BM_UFlat/7 2008 1994 1.7GB/s lsp +0.7%
BM_UFlat/8 775700 773286 1.2GB/s xls +0.3%
BM_UFlat/9 165578 164480 881.8MB/s txt1 +0.7%
BM_UFlat/10 143707 144139 828.2MB/s txt2 -0.3%
BM_UFlat/11 443026 436281 932.8MB/s txt3 +1.5%
BM_UFlat/12 603129 595856 771.2MB/s txt4 +1.2%
BM_UFlat/13 271682 270450 1.8GB/s bin +0.5%
BM_UFlat/14 26200 25666 1.4GB/s sum +2.1%
BM_UFlat/15 2620 2608 1.5GB/s man +0.5%
BM_UFlat/16 48908 47756 2.3GB/s pb +2.4%
BM_UFlat/17 174638 170346 1031.9MB/s gaviota +2.5%
BM_UValidate/0 31922 31898 3.0GB/s html +0.1%
BM_UValidate/1 341265 363554 1.8GB/s urls -6.1%
BM_UValidate/2 160 151 782.8GB/s jpg +6.0%
BM_UValidate/3 10402 10380 8.5GB/s pdf +0.2%
BM_UValidate/4 129490 130587 2.9GB/s html4 -0.8%
BM_UDataBuffer/0 59383 58736 1.6GB/s html +1.1%
BM_UDataBuffer/1 619222 637786 1049.8MB/s urls -2.9%
BM_UDataBuffer/2 10775 11941 9.9GB/s jpg -9.8%
BM_UDataBuffer/3 18002 17930 4.9GB/s pdf +0.4%
BM_UDataBuffer/4 259182 259306 1.5GB/s html4 -0.0%
BM_UCord/0 59379 57814 1.6GB/s html +2.7%
BM_UCord/1 598456 615162 1088.4MB/s urls -2.7%
BM_UCord/2 8519 8628 13.7GB/s jpg -1.3%
BM_UCord/3 18123 17537 5.0GB/s pdf +3.3%
BM_UCord/4 252375 252331 1.5GB/s html4 +0.0%
BM_UCordString/0 49494 49790 1.9GB/s html -0.6%
BM_UCordString/1 524659 541803 1.2GB/s urls -3.2%
BM_UCordString/2 8206 8354 14.2GB/s jpg -1.8%
BM_UCordString/3 17235 16537 5.3GB/s pdf +4.2%
BM_UCordString/4 210188 211072 1.8GB/s html4 -0.4%
BM_UCordValidate/0 31956 31587 3.0GB/s html +1.2%
BM_UCordValidate/1 340828 362141 1.8GB/s urls -5.9%
BM_UCordValidate/2 783 744 158.9GB/s jpg +5.2%
BM_UCordValidate/3 10543 10462 8.4GB/s pdf +0.8%
BM_UCordValidate/4 130150 129789 2.9GB/s html4 +0.3%
BM_ZFlat/0 113873 111200 878.2MB/s html (22.31 %) +2.4%
BM_ZFlat/1 1473023 1489858 449.4MB/s urls (47.77 %) -1.1%
BM_ZFlat/2 23569 19486 6.1GB/s jpg (99.87 %) +21.0%
BM_ZFlat/3 49178 48046 1.8GB/s pdf (82.07 %) +2.4%
BM_ZFlat/4 475063 469394 832.2MB/s html4 (22.51 %) +1.2%
BM_ZFlat/5 46910 46816 501.2MB/s cp (48.12 %) +0.2%
BM_ZFlat/6 16883 16916 628.6MB/s c (42.40 %) -0.2%
BM_ZFlat/7 5381 5447 651.5MB/s lsp (48.37 %) -1.2%
BM_ZFlat/8 1466870 1473861 666.3MB/s xls (41.23 %) -0.5%
BM_ZFlat/9 468006 464101 312.5MB/s txt1 (57.87 %) +0.8%
BM_ZFlat/10 408157 408957 291.9MB/s txt2 (61.93 %) -0.2%
BM_ZFlat/11 1253348 1232910 330.1MB/s txt3 (54.92 %) +1.7%
BM_ZFlat/12 1702373 1702977 269.8MB/s txt4 (66.22 %) -0.0%
BM_ZFlat/13 439792 438557 1116.0MB/s bin (18.11 %) +0.3%
BM_ZFlat/14 80766 78851 462.5MB/s sum (48.96 %) +2.4%
BM_ZFlat/15 7420 7542 534.5MB/s man (59.36 %) -1.6%
BM_ZFlat/16 112043 100126 1.1GB/s pb (19.64 %) +11.9%
BM_ZFlat/17 368877 357703 491.4MB/s gaviota (37.72 %) +3.1%
BM_ZCord/0 116402 113564 859.9MB/s html +2.5%
BM_ZCord/1 1507156 1519911 440.5MB/s urls -0.8%
BM_ZCord/2 39860 33686 3.5GB/s jpg +18.3%
BM_ZCord/3 56211 54694 1.6GB/s pdf +2.8%
BM_ZCord/4 485594 479212 815.1MB/s html4 +1.3%
BM_ZDataBuffer/0 123185 121572 803.3MB/s html +1.3%
BM_ZDataBuffer/1 1569111 1589380 421.3MB/s urls -1.3%
BM_ZDataBuffer/2 53143 49556 2.4GB/s jpg +7.2%
BM_ZDataBuffer/3 65725 66826 1.3GB/s pdf -1.6%
BM_ZDataBuffer/4 517871 514750 758.9MB/s html4 +0.6%
Sum of all benchmarks 20258879 20315484 -0.3%
AMD Instanbul 2.4 GHz:
Benchmark Base (ns) New (ns) Improvement
-------------------------------------------------------------------------------------------------
BM_UFlat/0 97120 96585 1011.1MB/s html +0.6%
BM_UFlat/1 917473 948016 706.3MB/s urls -3.2%
BM_UFlat/2 21496 23938 4.9GB/s jpg -10.2%
BM_UFlat/3 44751 45639 1.9GB/s pdf -1.9%
BM_UFlat/4 391950 391413 998.0MB/s html4 +0.1%
BM_UFlat/5 37366 37201 630.7MB/s cp +0.4%
BM_UFlat/6 18350 18318 580.5MB/s c +0.2%
BM_UFlat/7 5672 5661 626.9MB/s lsp +0.2%
BM_UFlat/8 1533390 1529441 642.1MB/s xls +0.3%
BM_UFlat/9 335477 336553 431.0MB/s txt1 -0.3%
BM_UFlat/10 285140 292080 408.7MB/s txt2 -2.4%
BM_UFlat/11 888507 894758 454.9MB/s txt3 -0.7%
BM_UFlat/12 1187643 1210928 379.5MB/s txt4 -1.9%
BM_UFlat/13 493717 507447 964.5MB/s bin -2.7%
BM_UFlat/14 61740 60870 599.1MB/s sum +1.4%
BM_UFlat/15 7211 7187 560.9MB/s man +0.3%
BM_UFlat/16 97435 93100 1.2GB/s pb +4.7%
BM_UFlat/17 362662 356395 493.2MB/s gaviota +1.8%
BM_UValidate/0 47475 47118 2.0GB/s html +0.8%
BM_UValidate/1 501304 529741 1.2GB/s urls -5.4%
BM_UValidate/2 276 243 486.2GB/s jpg +13.6%
BM_UValidate/3 16361 16261 5.4GB/s pdf +0.6%
BM_UValidate/4 190741 190353 2.0GB/s html4 +0.2%
BM_UDataBuffer/0 111080 109771 889.6MB/s html +1.2%
BM_UDataBuffer/1 1051035 1085999 616.5MB/s urls -3.2%
BM_UDataBuffer/2 25801 25463 4.6GB/s jpg +1.3%
BM_UDataBuffer/3 50493 49946 1.8GB/s pdf +1.1%
BM_UDataBuffer/4 447258 444138 879.5MB/s html4 +0.7%
BM_UCord/0 109350 107909 905.0MB/s html +1.3%
BM_UCord/1 1023396 1054964 634.7MB/s urls -3.0%
BM_UCord/2 25292 24371 4.9GB/s jpg +3.8%
BM_UCord/3 48955 49736 1.8GB/s pdf -1.6%
BM_UCord/4 440452 437331 893.2MB/s html4 +0.7%
BM_UCordString/0 98511 98031 996.2MB/s html +0.5%
BM_UCordString/1 933230 963495 694.9MB/s urls -3.1%
BM_UCordString/2 23311 24076 4.9GB/s jpg -3.2%
BM_UCordString/3 45568 46196 1.9GB/s pdf -1.4%
BM_UCordString/4 397791 396934 984.1MB/s html4 +0.2%
BM_UCordValidate/0 47537 46921 2.0GB/s html +1.3%
BM_UCordValidate/1 505071 532716 1.2GB/s urls -5.2%
BM_UCordValidate/2 1663 1621 72.9GB/s jpg +2.6%
BM_UCordValidate/3 16890 16926 5.2GB/s pdf -0.2%
BM_UCordValidate/4 192365 191984 2.0GB/s html4 +0.2%
BM_ZFlat/0 184708 179103 545.3MB/s html (22.31 %) +3.1%
BM_ZFlat/1 2293864 2302950 290.7MB/s urls (47.77 %) -0.4%
BM_ZFlat/2 52852 47618 2.5GB/s jpg (99.87 %) +11.0%
BM_ZFlat/3 100766 96179 935.3MB/s pdf (82.07 %) +4.8%
BM_ZFlat/4 741220 727977 536.6MB/s html4 (22.51 %) +1.8%
BM_ZFlat/5 85402 85418 274.7MB/s cp (48.12 %) -0.0%
BM_ZFlat/6 36558 36494 291.4MB/s c (42.40 %) +0.2%
BM_ZFlat/7 12706 12507 283.7MB/s lsp (48.37 %) +1.6%
BM_ZFlat/8 2336823 2335688 420.5MB/s xls (41.23 %) +0.0%
BM_ZFlat/9 701804 681153 212.9MB/s txt1 (57.87 %) +3.0%
BM_ZFlat/10 606700 597194 199.9MB/s txt2 (61.93 %) +1.6%
BM_ZFlat/11 1852283 1803238 225.7MB/s txt3 (54.92 %) +2.7%
BM_ZFlat/12 2475527 2443354 188.1MB/s txt4 (66.22 %) +1.3%
BM_ZFlat/13 694497 696654 702.6MB/s bin (18.11 %) -0.3%
BM_ZFlat/14 136929 129855 280.8MB/s sum (48.96 %) +5.4%
BM_ZFlat/15 17172 17124 235.4MB/s man (59.36 %) +0.3%
BM_ZFlat/16 190364 171763 658.4MB/s pb (19.64 %) +10.8%
BM_ZFlat/17 567285 555190 316.6MB/s gaviota (37.72 %) +2.2%
BM_ZCord/0 193490 187031 522.1MB/s html +3.5%
BM_ZCord/1 2427537 2415315 277.2MB/s urls +0.5%
BM_ZCord/2 85378 81412 1.5GB/s jpg +4.9%
BM_ZCord/3 121898 119419 753.3MB/s pdf +2.1%
BM_ZCord/4 779564 762961 512.0MB/s html4 +2.2%
BM_ZDataBuffer/0 213820 207272 471.1MB/s html +3.2%
BM_ZDataBuffer/1 2589010 2586495 258.9MB/s urls +0.1%
BM_ZDataBuffer/2 121871 118885 1018.4MB/s jpg +2.5%
BM_ZDataBuffer/3 145382 145986 616.2MB/s pdf -0.4%
BM_ZDataBuffer/4 868117 852754 458.1MB/s html4 +1.8%
Sum of all benchmarks 33771833 33744763 +0.1%
git-svn-id: https://snappy.googlecode.com/svn/trunk@71 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 81f34784b7b812dcda956ee489dfdc74ec2da990
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sun Jan 6 19:21:26 2013 +0000
Adjust the Snappy open-source distribution for the changes in Google's
internal file API.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@70 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 698af469b47fe809905e2ed173ad84241de5800f
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Jan 4 11:54:20 2013 +0000
Change a few ORs to additions where they don't matter. This helps the compiler
use the LEA instruction more efficiently, since e.g. a + (b << 2) can be encoded
as one instruction. Even more importantly, it can constant-fold the
COPY_* enums together with the shifted negative constants, which also saves
some instructions. (We don't need it for LITERAL, since it happens to be 0.)
I am unsure why the compiler couldn't do this itself, but the theory is that
it cannot prove that len-1 and len-4 cannot underflow/wrap, and thus can't
do the optimization safely.
The gains are small but measurable; 0.5-1.0% over the BM_Z* benchmarks
(measured on Westmere, Sandy Bridge and Istanbul).
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@69 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 55209f9b92efd97e0a61be28ed94210de04c3bfc
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon Oct 8 11:37:16 2012 +0000
Stop giving -Werror to automake, due to an incompatibility between current
versions of libtool and automake on non-GNU platforms (e.g. Mac OS X).
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@68 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit b86e81c8b3426a62d8ab3a7674c2506e9e678740
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Aug 17 13:54:47 2012 +0000
Fix public issue 66: Document GetUncompressedLength better, in particular that
it leaves the source in a state that's not appropriate for RawUncompress.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@67 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 2e225ba821b420ae28e1d427075d5589c1e892d9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Jul 31 11:44:44 2012 +0000
Fix public issue 64: Check for <sys/time.h> at configure time,
since MSVC seemingly does not have it.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@66 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit e89f20ab46ee11050760c6d57f05c2a3825a911c
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Jul 4 09:34:48 2012 +0000
Handle the case where gettimeofday() goes backwards or returns the same value
twice; it could cause division by zero in the unit test framework.
(We already had one fix for this in place, but it was incomplete.)
This could in theory happen on any system, since there are few guarantees
about gettimeofday(), but seems to only happen in practice on GNU/Hurd, where
gettimeofday() is cached and only updated ever so often.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@65 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 3ec60ac9878de5d0317ad38fc545080a4bfaa74f
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Jul 4 09:28:33 2012 +0000
Mark ARMv4 as not supporting unaligned accesses (not just ARMv5 and ARMv6);
apparently Debian still targets these by default, giving us segfaults on
armel.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@64 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit be80d6f74f9d82220e952a54f3f129aae1f13f95
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue May 22 09:46:05 2012 +0000
Fix public bug #62: Remove an extraneous comma at the end of an enum list,
causing compile errors when embedded in Mozilla on OpenBSD.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@63 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 8b95464146dddab1c7068f879162db9a885cdafe
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue May 22 09:32:50 2012 +0000
Snappy library no longer depends on iostream.
Achieved by moving logging macro definitions to a test-only
header file, and by changing non-test code to use assert,
fprintf, and abort instead of LOG/CHECK macros.
R=sesse
git-svn-id: https://snappy.googlecode.com/svn/trunk@62 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit fc723b212d6972af7051261754770b3f70a7dc03
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Feb 24 15:46:37 2012 +0000
Release Snappy 1.0.5.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@61 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit dc63e0ad9693e13390ba31b00d92ecccaf7605c3
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Feb 23 17:00:36 2012 +0000
For 32-bit platforms, do not try to accelerate multiple neighboring
32-bit loads with a 64-bit load during compression (it's not a win).
The main target for this optimization is ARM, but 32-bit x86 gets
a small gain, too, although there is noise in the microbenchmarks.
It's a no-op for 64-bit x86. It does not affect decompression.
Microbenchmark results on a Cortex-A9 1GHz, using g++ 4.6.2 (from
Ubuntu/Linaro), -O2 -DNDEBUG -Wa,-march=armv7a -mtune=cortex-a9
-mthumb-interwork, minimum 1000 iterations:
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_ZFlat/0 1158277 1160000 1000 84.2MB/s html (23.57 %) [ +4.3%]
BM_ZFlat/1 14861782 14860000 1000 45.1MB/s urls (50.89 %) [ +1.1%]
BM_ZFlat/2 393595 390000 1000 310.5MB/s jpg (99.88 %) [ +0.0%]
BM_ZFlat/3 650583 650000 1000 138.4MB/s pdf (82.13 %) [ +3.1%]
BM_ZFlat/4 4661480 4660000 1000 83.8MB/s html4 (23.55 %) [ +4.3%]
BM_ZFlat/5 491973 490000 1000 47.9MB/s cp (48.12 %) [ +2.0%]
BM_ZFlat/6 193575 192678 1038 55.2MB/s c (42.40 %) [ +9.0%]
BM_ZFlat/7 62343 62754 3187 56.5MB/s lsp (48.37 %) [ +2.6%]
BM_ZFlat/8 17708468 17710000 1000 55.5MB/s xls (41.34 %) [ -0.3%]
BM_ZFlat/9 3755345 3760000 1000 38.6MB/s txt1 (59.81 %) [ +8.2%]
BM_ZFlat/10 3324217 3320000 1000 36.0MB/s txt2 (64.07 %) [ +4.2%]
BM_ZFlat/11 10139932 10140000 1000 40.1MB/s txt3 (57.11 %) [ +6.4%]
BM_ZFlat/12 13532109 13530000 1000 34.0MB/s txt4 (68.35 %) [ +5.0%]
BM_ZFlat/13 4690847 4690000 1000 104.4MB/s bin (18.21 %) [ +4.1%]
BM_ZFlat/14 830682 830000 1000 43.9MB/s sum (51.88 %) [ +1.2%]
BM_ZFlat/15 84784 85011 2235 47.4MB/s man (59.36 %) [ +1.1%]
BM_ZFlat/16 1293254 1290000 1000 87.7MB/s pb (23.15 %) [ +2.3%]
BM_ZFlat/17 2775155 2780000 1000 63.2MB/s gaviota (38.27 %) [+12.2%]
Core i7 in 32-bit mode (only one run and 100 iterations, though, so noisy):
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_ZFlat/0 227582 223464 3043 437.0MB/s html (23.57 %) [ +7.4%]
BM_ZFlat/1 2982430 2918455 233 229.4MB/s urls (50.89 %) [ +2.9%]
BM_ZFlat/2 46967 46658 15217 2.5GB/s jpg (99.88 %) [ +0.0%]
BM_ZFlat/3 115298 114864 5833 783.2MB/s pdf (82.13 %) [ +1.5%]
BM_ZFlat/4 913440 899743 778 434.2MB/s html4 (23.55 %) [ +0.3%]
BM_ZFlat/5 110302 108571 7000 216.1MB/s cp (48.12 %) [ +0.0%]
BM_ZFlat/6 44409 43372 15909 245.2MB/s c (42.40 %) [ +0.8%]
BM_ZFlat/7 15713 15643 46667 226.9MB/s lsp (48.37 %) [ +2.7%]
BM_ZFlat/8 2625539 2602230 269 377.4MB/s xls (41.34 %) [ +1.4%]
BM_ZFlat/9 808884 811429 875 178.8MB/s txt1 (59.81 %) [ -3.9%]
BM_ZFlat/10 709532 700000 1000 170.5MB/s txt2 (64.07 %) [ +0.0%]
BM_ZFlat/11 2177682 2162162 333 188.2MB/s txt3 (57.11 %) [ -1.4%]
BM_ZFlat/12 2849640 2840000 250 161.8MB/s txt4 (68.35 %) [ -1.4%]
BM_ZFlat/13 849760 835476 778 585.8MB/s bin (18.21 %) [ +1.2%]
BM_ZFlat/14 165940 164571 4375 221.6MB/s sum (51.88 %) [ +1.4%]
BM_ZFlat/15 20939 20571 35000 196.0MB/s man (59.36 %) [ +2.1%]
BM_ZFlat/16 239209 236544 2917 478.1MB/s pb (23.15 %) [ +4.2%]
BM_ZFlat/17 616206 610000 1000 288.2MB/s gaviota (38.27 %) [ -1.6%]
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@60 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f8829ea39d51432ba4e6a26ddaec57acea779f4c
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Feb 21 17:02:17 2012 +0000
Enable the use of unaligned loads and stores for ARM-based architectures
where they are available (ARMv7 and higher). This gives a significant
speed boost on ARM, both for compression and decompression.
It should not affect x86 at all.
There are more changes possible to speed up ARM, but it might not be
that easy to do without hurting x86 or making the code uglier.
Also, we de not try to use NEON yet.
Microbenchmark results on a Cortex-A9 1GHz, using g++ 4.6.2 (from Ubuntu/Linaro),
-O2 -DNDEBUG -Wa,-march=armv7a -mtune=cortex-a9 -mthumb-interwork:
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_UFlat/0 524806 529100 378 184.6MB/s html [+33.6%]
BM_UFlat/1 5139790 5200000 100 128.8MB/s urls [+28.8%]
BM_UFlat/2 86540 84166 1901 1.4GB/s jpg [ +0.6%]
BM_UFlat/3 215351 210176 904 428.0MB/s pdf [+29.8%]
BM_UFlat/4 2144490 2100000 100 186.0MB/s html4 [+33.3%]
BM_UFlat/5 194482 190000 1000 123.5MB/s cp [+36.2%]
BM_UFlat/6 91843 90175 2107 117.9MB/s c [+38.6%]
BM_UFlat/7 28535 28426 6684 124.8MB/s lsp [+34.7%]
BM_UFlat/8 9206600 9200000 100 106.7MB/s xls [+42.4%]
BM_UFlat/9 1865273 1886792 106 76.9MB/s txt1 [+32.5%]
BM_UFlat/10 1576809 1587301 126 75.2MB/s txt2 [+32.3%]
BM_UFlat/11 4968450 4900000 100 83.1MB/s txt3 [+32.7%]
BM_UFlat/12 6673970 6700000 100 68.6MB/s txt4 [+32.8%]
BM_UFlat/13 2391470 2400000 100 203.9MB/s bin [+29.2%]
BM_UFlat/14 334601 344827 522 105.8MB/s sum [+30.6%]
BM_UFlat/15 37404 38080 5252 105.9MB/s man [+33.8%]
BM_UFlat/16 535470 540540 370 209.2MB/s pb [+31.2%]
BM_UFlat/17 1875245 1886792 106 93.2MB/s gaviota [+37.8%]
BM_UValidate/0 178425 179533 1114 543.9MB/s html [ +2.7%]
BM_UValidate/1 2100450 2000000 100 334.8MB/s urls [ +5.0%]
BM_UValidate/2 1039 1044 172413 113.3GB/s jpg [ +3.4%]
BM_UValidate/3 59423 59470 3363 1.5GB/s pdf [ +7.8%]
BM_UValidate/4 760716 766283 261 509.8MB/s html4 [ +6.5%]
BM_ZFlat/0 1204632 1204819 166 81.1MB/s html (23.57 %) [+32.8%]
BM_ZFlat/1 15656190 15600000 100 42.9MB/s urls (50.89 %) [+27.6%]
BM_ZFlat/2 403336 410677 487 294.8MB/s jpg (99.88 %) [+16.5%]
BM_ZFlat/3 664073 671140 298 134.0MB/s pdf (82.13 %) [+28.4%]
BM_ZFlat/4 4961940 4900000 100 79.7MB/s html4 (23.55 %) [+30.6%]
BM_ZFlat/5 500664 501253 399 46.8MB/s cp (48.12 %) [+33.4%]
BM_ZFlat/6 217276 215982 926 49.2MB/s c (42.40 %) [+25.0%]
BM_ZFlat/7 64122 65487 3054 54.2MB/s lsp (48.37 %) [+36.1%]
BM_ZFlat/8 18045730 18000000 100 54.6MB/s xls (41.34 %) [+34.4%]
BM_ZFlat/9 4051530 4000000 100 36.3MB/s txt1 (59.81 %) [+25.0%]
BM_ZFlat/10 3451800 3500000 100 34.1MB/s txt2 (64.07 %) [+25.7%]
BM_ZFlat/11 11052340 11100000 100 36.7MB/s txt3 (57.11 %) [+24.3%]
BM_ZFlat/12 14538690 14600000 100 31.5MB/s txt4 (68.35 %) [+24.7%]
BM_ZFlat/13 5041850 5000000 100 97.9MB/s bin (18.21 %) [+32.0%]
BM_ZFlat/14 908840 909090 220 40.1MB/s sum (51.88 %) [+22.2%]
BM_ZFlat/15 86921 86206 1972 46.8MB/s man (59.36 %) [+42.2%]
BM_ZFlat/16 1312315 1315789 152 86.0MB/s pb (23.15 %) [+34.5%]
BM_ZFlat/17 3173120 3200000 100 54.9MB/s gaviota (38.27%) [+28.1%]
The move from 64-bit to 32-bit operations for the copies also affected 32-bit x86;
positive on the decompression side, and slightly negative on the compression side
(unless that is noise; I only ran once):
Benchmark Time(ns) CPU(ns) Iterations
-----------------------------------------------------
BM_UFlat/0 86279 86140 7778 1.1GB/s html [ +7.5%]
BM_UFlat/1 839265 822622 778 813.9MB/s urls [ +9.4%]
BM_UFlat/2 9180 9143 87500 12.9GB/s jpg [ +1.2%]
BM_UFlat/3 35080 35000 20000 2.5GB/s pdf [+10.1%]
BM_UFlat/4 350318 345000 2000 1.1GB/s html4 [ +7.0%]
BM_UFlat/5 33808 33472 21212 701.0MB/s cp [ +9.0%]
BM_UFlat/6 15201 15214 46667 698.9MB/s c [+14.9%]
BM_UFlat/7 4652 4651 159091 762.9MB/s lsp [ +7.5%]
BM_UFlat/8 1285551 1282528 538 765.7MB/s xls [+10.7%]
BM_UFlat/9 282510 281690 2414 514.9MB/s txt1 [+13.6%]
BM_UFlat/10 243494 239286 2800 498.9MB/s txt2 [+14.4%]
BM_UFlat/11 743625 740000 1000 550.0MB/s txt3 [+14.3%]
BM_UFlat/12 999441 989717 778 464.3MB/s txt4 [+16.1%]
BM_UFlat/13 412402 410076 1707 1.2GB/s bin [ +7.3%]
BM_UFlat/14 54876 54000 10000 675.3MB/s sum [+13.0%]
BM_UFlat/15 6146 6100 100000 660.8MB/s man [+14.8%]
BM_UFlat/16 90496 90286 8750 1.2GB/s pb [ +4.0%]
BM_UFlat/17 292650 292000 2500 602.0MB/s gaviota [+18.1%]
BM_UValidate/0 49620 49699 14286 1.9GB/s html [ +0.0%]
BM_UValidate/1 501371 500000 1000 1.3GB/s urls [ +0.0%]
BM_UValidate/2 232 227 3043478 521.5GB/s jpg [ +1.3%]
BM_UValidate/3 17250 17143 43750 5.1GB/s pdf [ -1.3%]
BM_UValidate/4 198643 200000 3500 1.9GB/s html4 [ -0.9%]
BM_ZFlat/0 227128 229415 3182 425.7MB/s html (23.57 %) [ -1.4%]
BM_ZFlat/1 2970089 2960000 250 226.2MB/s urls (50.89 %) [ -1.9%]
BM_ZFlat/2 45683 44999 15556 2.6GB/s jpg (99.88 %) [ +2.2%]
BM_ZFlat/3 114661 113136 6364 795.1MB/s pdf (82.13 %) [ -1.5%]
BM_ZFlat/4 919702 914286 875 427.2MB/s html4 (23.55%) [ -1.3%]
BM_ZFlat/5 108189 108422 6364 216.4MB/s cp (48.12 %) [ -1.2%]
BM_ZFlat/6 44525 44000 15909 241.7MB/s c (42.40 %) [ -2.9%]
BM_ZFlat/7 15973 15857 46667 223.8MB/s lsp (48.37 %) [ +0.0%]
BM_ZFlat/8 2677888 2639405 269 372.1MB/s xls (41.34 %) [ -1.4%]
BM_ZFlat/9 800715 780000 1000 186.0MB/s txt1 (59.81 %) [ -0.4%]
BM_ZFlat/10 700089 700000 1000 170.5MB/s txt2 (64.07 %) [ -2.9%]
BM_ZFlat/11 2159356 2138365 318 190.3MB/s txt3 (57.11 %) [ -0.3%]
BM_ZFlat/12 2796143 2779923 259 165.3MB/s txt4 (68.35 %) [ -1.4%]
BM_ZFlat/13 856458 835476 778 585.8MB/s bin (18.21 %) [ -0.1%]
BM_ZFlat/14 166908 166857 4375 218.6MB/s sum (51.88 %) [ -1.4%]
BM_ZFlat/15 21181 20857 35000 193.3MB/s man (59.36 %) [ -0.8%]
BM_ZFlat/16 244009 239973 2917 471.3MB/s pb (23.15 %) [ -1.4%]
BM_ZFlat/17 596362 590000 1000 297.9MB/s gaviota (38.27%) [ +0.0%]
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@59 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f2e184f638bdc7905f26c24faaf10fc0f5d33403
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sat Feb 11 22:11:22 2012 +0000
Lower the size allocated in the "corrupted input" unit test from 256 MB
to 2 MB. This fixes issues with running the unit test on platforms with
little RAM (e.g. some ARM boards).
Also, reactivate the 2 MB test for 64-bit platforms; there's no good
reason why it shouldn't be.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@58 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit e750dc0f054ba74b0ce76dd2013e6728cc7a41c5
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sun Jan 8 17:55:48 2012 +0000
Minor refactoring to accomodate changes in Google's internal code tree.
git-svn-id: https://snappy.googlecode.com/svn/trunk@57 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit d9068ee301bdf893a4d8cb7c6518eacc44c4c1f2
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Jan 4 13:10:46 2012 +0000
Fix public issue r57: Fix most warnings with -Wall, mostly signed/unsigned
warnings. There are still some in the unit test, but the main .cc file should
be clean. We haven't enabled -Wall for the default build, since the unit test
is still not clean.
This also fixes a real bug in the open-source implementation of
ReadFileToStringOrDie(); it would not detect errors correctly.
I had to go through some pains to avoid performance loss as the types
were changed; I think there might still be some with 32-bit if and only if LFS
is enabled (ie., size_t is 64-bit), but for regular 32-bit and 64-bit I can't
see any losses, and I've diffed the generated GCC assembler between the old and
new code without seeing any significant choices. If anything, it's ever so
slightly faster.
This may or may not enable compression of very large blocks (>2^32 bytes)
when size_t is 64-bit, but I haven't checked, and it is still not a supported
case.
git-svn-id: https://snappy.googlecode.com/svn/trunk@56 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 0755c815197dacc77d8971ae917c86d7aa96bf8e
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Jan 4 10:46:39 2012 +0000
Add a framing format description. We do not have any implementation of this at
the current point, but there seems to be enough of a general interest in the
topic (cf. public bug #34).
R=csilvers,sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@55 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit d7eb2dc4133794b62cba691f9be40d1549bc32e2
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon Dec 5 21:27:26 2011 +0000
Speed up decompression by moving the refill check to the end of the loop.
This seems to work because in most of the branches, the compiler can evaluate
“ip_limit_ - ip” in a more efficient way than reloading ip_limit_ from memory
(either by already having the entire expression in a register, or reconstructing
it from “avail”, or something else). Memory loads, even from L1, are seemingly
costly in the big picture at the current decompression speeds.
Microbenchmarks (64-bit, opt mode):
Westmere (Intel Core i7):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 74492 74491 187894 1.3GB/s html [ +5.9%]
BM_UFlat/1 712268 712263 19644 940.0MB/s urls [ +3.8%]
BM_UFlat/2 10591 10590 1000000 11.2GB/s jpg [ -6.8%]
BM_UFlat/3 29643 29643 469915 3.0GB/s pdf [ +7.9%]
BM_UFlat/4 304669 304667 45930 1.3GB/s html4 [ +4.8%]
BM_UFlat/5 28508 28507 490077 823.1MB/s cp [ +4.0%]
BM_UFlat/6 12415 12415 1000000 856.5MB/s c [ +8.6%]
BM_UFlat/7 3415 3415 4084723 1039.0MB/s lsp [+18.0%]
BM_UFlat/8 979569 979563 14261 1002.5MB/s xls [ +5.8%]
BM_UFlat/9 230150 230148 60934 630.2MB/s txt1 [ +5.2%]
BM_UFlat/10 197167 197166 71135 605.5MB/s txt2 [ +4.7%]
BM_UFlat/11 607394 607390 23041 670.1MB/s txt3 [ +5.6%]
BM_UFlat/12 808502 808496 17316 568.4MB/s txt4 [ +5.0%]
BM_UFlat/13 372791 372788 37564 1.3GB/s bin [ +3.3%]
BM_UFlat/14 44541 44541 313969 818.8MB/s sum [ +5.7%]
BM_UFlat/15 4833 4833 2898697 834.1MB/s man [ +4.8%]
BM_UFlat/16 79855 79855 175356 1.4GB/s pb [ +4.8%]
BM_UFlat/17 245845 245843 56838 715.0MB/s gaviota [ +5.8%]
Clovertown (Intel Core 2):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 107911 107890 100000 905.1MB/s html [ +2.2%]
BM_UFlat/1 1011237 1011041 10000 662.3MB/s urls [ +2.5%]
BM_UFlat/2 26775 26770 523089 4.4GB/s jpg [ +0.0%]
BM_UFlat/3 48103 48095 290618 1.8GB/s pdf [ +3.4%]
BM_UFlat/4 437724 437644 31937 892.6MB/s html4 [ +2.1%]
BM_UFlat/5 39607 39600 358284 592.5MB/s cp [ +2.4%]
BM_UFlat/6 18227 18224 768191 583.5MB/s c [ +2.7%]
BM_UFlat/7 5171 5170 2709437 686.4MB/s lsp [ +3.9%]
BM_UFlat/8 1560291 1559989 8970 629.5MB/s xls [ +3.6%]
BM_UFlat/9 335401 335343 41731 432.5MB/s txt1 [ +3.0%]
BM_UFlat/10 287014 286963 48758 416.0MB/s txt2 [ +2.8%]
BM_UFlat/11 888522 888356 15752 458.1MB/s txt3 [ +2.9%]
BM_UFlat/12 1186600 1186378 10000 387.3MB/s txt4 [ +3.1%]
BM_UFlat/13 572295 572188 24468 855.4MB/s bin [ +2.1%]
BM_UFlat/14 64060 64049 218401 569.4MB/s sum [ +4.1%]
BM_UFlat/15 7264 7263 1916168 555.0MB/s man [ +1.4%]
BM_UFlat/16 108853 108836 100000 1039.1MB/s pb [ +1.7%]
BM_UFlat/17 364289 364223 38419 482.6MB/s gaviota [ +4.9%]
Barcelona (AMD Opteron):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 103900 103871 100000 940.2MB/s html [ +8.3%]
BM_UFlat/1 1000435 1000107 10000 669.5MB/s urls [ +6.6%]
BM_UFlat/2 24659 24652 567362 4.8GB/s jpg [ +0.1%]
BM_UFlat/3 48206 48193 291121 1.8GB/s pdf [ +5.0%]
BM_UFlat/4 421980 421850 33174 926.0MB/s html4 [ +7.3%]
BM_UFlat/5 40368 40357 346994 581.4MB/s cp [ +8.7%]
BM_UFlat/6 19836 19830 708695 536.2MB/s c [ +8.0%]
BM_UFlat/7 6100 6098 2292774 581.9MB/s lsp [ +9.0%]
BM_UFlat/8 1693093 1692514 8261 580.2MB/s xls [ +8.0%]
BM_UFlat/9 365991 365886 38225 396.4MB/s txt1 [ +7.1%]
BM_UFlat/10 311330 311238 44950 383.6MB/s txt2 [ +7.6%]
BM_UFlat/11 975037 974737 14376 417.5MB/s txt3 [ +6.9%]
BM_UFlat/12 1303558 1303175 10000 352.6MB/s txt4 [ +7.3%]
BM_UFlat/13 517448 517290 27144 946.2MB/s bin [ +5.5%]
BM_UFlat/14 66537 66518 210352 548.3MB/s sum [ +7.5%]
BM_UFlat/15 7976 7974 1760383 505.6MB/s man [ +5.6%]
BM_UFlat/16 103121 103092 100000 1097.0MB/s pb [ +8.7%]
BM_UFlat/17 391431 391314 35733 449.2MB/s gaviota [ +6.5%]
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@54 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 5ed51ce15fc4ff8d2f7235704eb6b0c3f762fb88
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Nov 23 11:14:17 2011 +0000
Speed up decompression by making the fast path for literals faster.
We do the fast-path step as soon as possible; in fact, as soon as we know the
literal length. Since we usually hit the fast path, we can then skip the checks
for long literals and available input space (beyond what the fast path check
already does).
Note that this changes the decompression Writer API; however, it does not
change the ABI, since writers are always templatized and as such never
cross compilation units. The new API is slightly more general, in that it
doesn't hard-code the value 16. Note that we also take care to check
for len <= 16 first, since the other two checks almost always succeed
(so we don't want to waste time checking for them until we have to).
The improvements are most marked on Nehalem, but are generally positive
on other platforms as well. All microbenchmarks are 64-bit, opt.
Clovertown (Core 2):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 110226 110224 100000 886.0MB/s html [ +1.5%]
BM_UFlat/1 1036523 1036508 10000 646.0MB/s urls [ -0.8%]
BM_UFlat/2 26775 26775 522570 4.4GB/s jpg [ +0.0%]
BM_UFlat/3 49738 49737 280974 1.8GB/s pdf [ +0.3%]
BM_UFlat/4 446790 446792 31334 874.3MB/s html4 [ +0.8%]
BM_UFlat/5 40561 40562 350424 578.5MB/s cp [ +1.3%]
BM_UFlat/6 18722 18722 746903 568.0MB/s c [ +1.4%]
BM_UFlat/7 5373 5373 2608632 660.5MB/s lsp [ +8.3%]
BM_UFlat/8 1615716 1615718 8670 607.8MB/s xls [ +2.0%]
BM_UFlat/9 345278 345281 40481 420.1MB/s txt1 [ +1.4%]
BM_UFlat/10 294855 294855 47452 404.9MB/s txt2 [ +1.6%]
BM_UFlat/11 914263 914263 15316 445.2MB/s txt3 [ +1.1%]
BM_UFlat/12 1222694 1222691 10000 375.8MB/s txt4 [ +1.4%]
BM_UFlat/13 584495 584489 23954 837.4MB/s bin [ -0.6%]
BM_UFlat/14 66662 66662 210123 547.1MB/s sum [ +1.2%]
BM_UFlat/15 7368 7368 1881856 547.1MB/s man [ +4.0%]
BM_UFlat/16 110727 110726 100000 1021.4MB/s pb [ +2.3%]
BM_UFlat/17 382138 382141 36616 460.0MB/s gaviota [ -0.7%]
Westmere (Core i7):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 78861 78853 177703 1.2GB/s html [ +2.1%]
BM_UFlat/1 739560 739491 18912 905.4MB/s urls [ +3.4%]
BM_UFlat/2 9867 9866 1419014 12.0GB/s jpg [ +3.4%]
BM_UFlat/3 31989 31986 438385 2.7GB/s pdf [ +0.2%]
BM_UFlat/4 319406 319380 43771 1.2GB/s html4 [ +1.9%]
BM_UFlat/5 29639 29636 472862 791.7MB/s cp [ +5.2%]
BM_UFlat/6 13478 13477 1000000 789.0MB/s c [ +2.3%]
BM_UFlat/7 4030 4029 3475364 880.7MB/s lsp [ +8.7%]
BM_UFlat/8 1036585 1036492 10000 947.5MB/s xls [ +6.9%]
BM_UFlat/9 242127 242105 57838 599.1MB/s txt1 [ +3.0%]
BM_UFlat/10 206499 206480 67595 578.2MB/s txt2 [ +3.4%]
BM_UFlat/11 641635 641570 21811 634.4MB/s txt3 [ +2.4%]
BM_UFlat/12 848847 848769 16443 541.4MB/s txt4 [ +3.1%]
BM_UFlat/13 384968 384938 36366 1.2GB/s bin [ +0.3%]
BM_UFlat/14 47106 47101 297770 774.3MB/s sum [ +4.4%]
BM_UFlat/15 5063 5063 2772202 796.2MB/s man [ +7.7%]
BM_UFlat/16 83663 83656 167697 1.3GB/s pb [ +1.8%]
BM_UFlat/17 260224 260198 53823 675.6MB/s gaviota [ -0.5%]
Barcelona (Opteron):
Benchmark Time(ns) CPU(ns) Iterations
--------------------------------------------
BM_UFlat/0 112490 112457 100000 868.4MB/s html [ -0.4%]
BM_UFlat/1 1066719 1066339 10000 627.9MB/s urls [ +1.0%]
BM_UFlat/2 24679 24672 563802 4.8GB/s jpg [ +0.7%]
BM_UFlat/3 50603 50589 277285 1.7GB/s pdf [ +2.6%]
BM_UFlat/4 452982 452849 30900 862.6MB/s html4 [ -0.2%]
BM_UFlat/5 43860 43848 319554 535.1MB/s cp [ +1.2%]
BM_UFlat/6 21419 21413 653573 496.6MB/s c [ +1.0%]
BM_UFlat/7 6646 6645 2105405 534.1MB/s lsp [ +0.3%]
BM_UFlat/8 1828487 1827886 7658 537.3MB/s xls [ +2.6%]
BM_UFlat/9 391824 391714 35708 370.3MB/s txt1 [ +2.2%]
BM_UFlat/10 334913 334816 41885 356.6MB/s txt2 [ +1.7%]
BM_UFlat/11 1042062 1041674 10000 390.7MB/s txt3 [ +1.1%]
BM_UFlat/12 1398902 1398456 10000 328.6MB/s txt4 [ +1.7%]
BM_UFlat/13 545706 545530 25669 897.2MB/s bin [ -0.4%]
BM_UFlat/14 71512 71505 196035 510.0MB/s sum [ +1.4%]
BM_UFlat/15 8422 8421 1665036 478.7MB/s man [ +2.6%]
BM_UFlat/16 112053 112048 100000 1009.3MB/s pb [ -0.4%]
BM_UFlat/17 416723 416713 33612 421.8MB/s gaviota [ -2.0%]
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@53 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 0c1b9c3904430f5b399bd057d76de4bc36b7a123
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Nov 8 14:46:39 2011 +0000
Fix public issue #53: Update the README to the API we actually open-sourced
with.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@52 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit b61134bc0a6a904b41522b4e5c9e80874c730cef
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Oct 5 12:27:12 2011 +0000
In the format description, use a clearer example to emphasize that varints are
stored in little-endian. Patch from Christian von Roques.
R=csilvers
git-svn-id: https://snappy.googlecode.com/svn/trunk@51 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 21a2e4f55758e759302cd84ad0f3580affcba7d9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Sep 15 19:34:06 2011 +0000
Release Snappy 1.0.4.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@50 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit e2e303286813c759c5b1cdb46dad63c494f0a061
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Sep 15 09:50:05 2011 +0000
Fix public issue #50: Include generic byteswap macros.
Also include Solaris 10 and FreeBSD versions.
R=csilvers
git-svn-id: https://snappy.googlecode.com/svn/trunk@49 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 593002da3c051f4721312869f816b41485bad3b7
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Aug 10 18:57:27 2011 +0000
Partially fix public issue 50: Remove an extra comma from the end of some
enum declarations, as it seems the Sun compiler does not like it.
Based on patch by Travis Vitek.
git-svn-id: https://snappy.googlecode.com/svn/trunk@48 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f1063a5dc43891eed37f0586bfea57b84dddd756
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Aug 10 18:44:16 2011 +0000
Use the right #ifdef test for sys/mman.h.
Based on patch by Travis Vitek.
git-svn-id: https://snappy.googlecode.com/svn/trunk@47 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 41c827a2fa9ce048202d941187f211180feadde4
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Aug 10 01:22:09 2011 +0000
Fix public issue #47: Small comment cleanups in the unit test.
Originally based on a patch by Patrick Pelletier.
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@46 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 59aeffa6049b5c2a3a467e7602c1f93630b870e7
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Aug 10 01:14:43 2011 +0000
Fix public issue #46: Format description said "3-byte offset"
instead of "4-byte offset" for the longest copies.
Also fix an inconsistency in the heading for section 2.2.3.
Both patches by Patrick Pelletier.
R=csilvers
git-svn-id: https://snappy.googlecode.com/svn/trunk@45 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 57e7cd72559cb022ef32856f2252a4c4585e562e
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Jun 28 11:40:25 2011 +0000
Fix public issue #44: Make the definition and declaration of CompressFragment
identical, even regarding cv-qualifiers.
This is required to work around a bug in the Solaris Studio C++ compiler
(it does not properly disregard cv-qualifiers when doing name mangling).
R=sanjay
git-svn-id: https://snappy.googlecode.com/svn/trunk@44 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 13c4a449a8ea22139c9aa441e8024eebc9dbdf6e
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sat Jun 4 10:19:05 2011 +0000
Correct an inaccuracy in the Snappy format description.
(I stumbled into this when changing the way we decompress literals.)
R=csilvers
Revision created by MOE tool push_codebase.
git-svn-id: https://snappy.googlecode.com/svn/trunk@43 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f5406737403119e1483a71d2084d17728663a114
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Jun 3 20:53:06 2011 +0000
Speed up decompression by removing a fast-path attempt.
Whenever we try to enter a copy fast-path, there is a certain cost in checking
that all the preconditions are in place, but it's normally offset by the fact
that we can usually take the cheaper path. However, in a certain path we've
already established that "avail < literal_length", which usually means that
either the available space is small, or the literal is big. Both will disqualify
us from taking the fast path, and thus we take the hit from the precondition
checking without gaining much from having a fast path. Thus, simply don't try
the fast path in this situation -- we're already on a slow path anyway
(one where we need to refill more data from the reader).
I'm a bit surprised at how much this gained; it could be that this path is
more common than I thought, or that the simpler structure somehow makes the
compiler happier. I haven't looked at the assembler, but it's a win across
the board on both Core 2, Core i7 and Opteron, at least for the cases we
typically care about. The gains seem to be the largest on Core i7, though.
Results from my Core i7 workstation:
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_UFlat/0 73337 73091 190996 1.3GB/s html [ +1.7%]
BM_UFlat/1 696379 693501 20173 965.5MB/s urls [ +2.7%]
BM_UFlat/2 9765 9734 1472135 12.1GB/s jpg [ +0.7%]
BM_UFlat/3 29720 29621 472973 3.0GB/s pdf [ +1.8%]
BM_UFlat/4 294636 293834 47782 1.3GB/s html4 [ +2.3%]
BM_UFlat/5 28399 28320 494700 828.5MB/s cp [ +3.5%]
BM_UFlat/6 12795 12760 1000000 833.3MB/s c [ +1.2%]
BM_UFlat/7 3984 3973 3526448 893.2MB/s lsp [ +5.7%]
BM_UFlat/8 991996 989322 14141 992.6MB/s xls [ +3.3%]
BM_UFlat/9 228620 227835 61404 636.6MB/s txt1 [ +4.0%]
BM_UFlat/10 197114 196494 72165 607.5MB/s txt2 [ +3.5%]
BM_UFlat/11 605240 603437 23217 674.4MB/s txt3 [ +3.7%]
BM_UFlat/12 804157 802016 17456 573.0MB/s txt4 [ +3.9%]
BM_UFlat/13 347860 346998 40346 1.4GB/s bin [ +1.2%]
BM_UFlat/14 44684 44559 315315 818.4MB/s sum [ +2.3%]
BM_UFlat/15 5120 5106 2739726 789.4MB/s man [ +3.3%]
BM_UFlat/16 76591 76355 183486 1.4GB/s pb [ +2.8%]
BM_UFlat/17 238564 237828 58824 739.1MB/s gaviota [ +1.6%]
BM_UValidate/0 42194 42060 333333 2.3GB/s html [ -0.1%]
BM_UValidate/1 433182 432005 32407 1.5GB/s urls [ -0.1%]
BM_UValidate/2 197 196 71428571 603.3GB/s jpg [ +0.5%]
BM_UValidate/3 14494 14462 972222 6.1GB/s pdf [ +0.5%]
BM_UValidate/4 168444 167836 83832 2.3GB/s html4 [ +0.1%]
R=jeff
Revision created by MOE tool push_codebase.
git-svn-id: https://snappy.googlecode.com/svn/trunk@42 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 197f3ee9f9397e98c9abf07f9da875fbcb725dba
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Jun 3 20:47:14 2011 +0000
Speed up decompression by not needing a lookup table for literal items.
Looking up into and decoding the values from char_table has long shown up as a
hotspot in the decompressor. While it turns out that it's hard to make a more
efficient decoder for the copy ops, the literals are simple enough that we can
decode them without needing a table lookup. (This means that 1/4 of the table
is now unused, although that in itself doesn't buy us anything.)
The gains are small, but definitely present; some tests win as much as 10%,
but 1-4% is more typical. These results are from Core i7, in 64-bit mode;
Core 2 and Opteron show similar results. (I've run with more iterations
than unusual to make sure the smaller gains don't drown entirely in noise.)
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_UFlat/0 74665 74428 182055 1.3GB/s html [ +3.1%]
BM_UFlat/1 714106 711997 19663 940.4MB/s urls [ +4.4%]
BM_UFlat/2 9820 9789 1427115 12.1GB/s jpg [ -1.2%]
BM_UFlat/3 30461 30380 465116 2.9GB/s pdf [ +0.8%]
BM_UFlat/4 301445 300568 46512 1.3GB/s html4 [ +2.2%]
BM_UFlat/5 29338 29263 479452 801.8MB/s cp [ +1.6%]
BM_UFlat/6 13004 12970 1000000 819.9MB/s c [ +2.1%]
BM_UFlat/7 4180 4168 3349282 851.4MB/s lsp [ +1.3%]
BM_UFlat/8 1026149 1024000 10000 959.0MB/s xls [+10.7%]
BM_UFlat/9 237441 236830 59072 612.4MB/s txt1 [ +0.3%]
BM_UFlat/10 203966 203298 69307 587.2MB/s txt2 [ +0.8%]
BM_UFlat/11 627230 625000 22400 651.2MB/s txt3 [ +0.7%]
BM_UFlat/12 836188 833979 16787 551.0MB/s txt4 [ +1.3%]
BM_UFlat/13 351904 350750 39886 1.4GB/s bin [ +3.8%]
BM_UFlat/14 45685 45562 308370 800.4MB/s sum [ +5.9%]
BM_UFlat/15 5286 5270 2656546 764.9MB/s man [ +1.5%]
BM_UFlat/16 78774 78544 178117 1.4GB/s pb [ +4.3%]
BM_UFlat/17 242270 241345 58091 728.3MB/s gaviota [ +1.2%]
BM_UValidate/0 42149 42000 333333 2.3GB/s html [ -3.0%]
BM_UValidate/1 432741 431303 32483 1.5GB/s urls [ +7.8%]
BM_UValidate/2 198 197 71428571 600.7GB/s jpg [+16.8%]
BM_UValidate/3 14560 14521 965517 6.1GB/s pdf [ -4.1%]
BM_UValidate/4 169065 168671 83832 2.3GB/s html4 [ -2.9%]
R=jeff
Revision created by MOE tool push_codebase.
git-svn-id: https://snappy.googlecode.com/svn/trunk@41 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 8efa2639e885ac467e7b11c662975c5844019fb9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Jun 2 22:57:41 2011 +0000
Release Snappy 1.0.3.
git-svn-id: https://snappy.googlecode.com/svn/trunk@40 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 2e12124bd87f39296709decc65195fa5bfced538
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Jun 2 18:06:54 2011 +0000
Remove an unneeded goto in the decompressor; it turns out that the
state of ip_ after decompression (or attempted decompresion) is
completely irrelevant, so we don't need the trailer.
Performance is, as expected, mostly flat -- there's a curious ~3-5%
loss in the "lsp" test, but that test case is so short it is hard to say
anything definitive about why (most likely, it's some sort of
unrelated effect).
R=jeff
git-svn-id: https://snappy.googlecode.com/svn/trunk@39 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit c266bbf32103f8ed4a83e2272ed3d8828d5b8b34
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Jun 2 17:59:40 2011 +0000
Speed up decompression by caching ip_.
It is seemingly hard for the compiler to understand that ip_, the current input
pointer into the compressed data stream, can not alias on anything else, and
thus using it directly will incur memory traffic as it cannot be kept in a
register. The code already knew about this and cached it into a local
variable, but since Step() only decoded one tag, it had to move ip_ back into
place between every tag. This seems to have cost us a significant amount of
performance, so changing Step() into a function that decodes as much as it can
before it saves ip_ back and returns. (Note that Step() was already inlined,
so it is not the manual inlining that buys the performance here.)
The wins are about 3-6% for Core 2, 6-13% on Core i7 and 5-12% on Opteron
(for plain array-to-array decompression, in 64-bit opt mode).
There is a tiny difference in the behavior here; if an invalid literal is
encountered (ie., the writer refuses the Append() operation), ip_ will now
point to the byte past the tag byte, instead of where the literal was
originally thought to end. However, we don't use ip_ for anything after
DecompressAllTags() has returned, so this should not change external behavior
in any way.
Microbenchmark results for Core i7, 64-bit (Opteron results are similar):
Benchmark Time(ns) CPU(ns) Iterations
---------------------------------------------------
BM_UFlat/0 79134 79110 8835 1.2GB/s html [ +6.2%]
BM_UFlat/1 786126 786096 891 851.8MB/s urls [+10.0%]
BM_UFlat/2 9948 9948 69125 11.9GB/s jpg [ -1.3%]
BM_UFlat/3 31999 31998 21898 2.7GB/s pdf [ +6.5%]
BM_UFlat/4 318909 318829 2204 1.2GB/s html4 [ +6.5%]
BM_UFlat/5 31384 31390 22363 747.5MB/s cp [ +9.2%]
BM_UFlat/6 14037 14034 49858 757.7MB/s c [+10.6%]
BM_UFlat/7 4612 4612 151395 769.5MB/s lsp [ +9.5%]
BM_UFlat/8 1203174 1203007 582 816.3MB/s xls [+19.3%]
BM_UFlat/9 253869 253955 2757 571.1MB/s txt1 [+11.4%]
BM_UFlat/10 219292 219290 3194 544.4MB/s txt2 [+12.1%]
BM_UFlat/11 672135 672131 1000 605.5MB/s txt3 [+11.2%]
BM_UFlat/12 902512 902492 776 509.2MB/s txt4 [+12.5%]
BM_UFlat/13 372110 371998 1881 1.3GB/s bin [ +5.8%]
BM_UFlat/14 50407 50407 10000 723.5MB/s sum [+13.5%]
BM_UFlat/15 5699 5701 100000 707.2MB/s man [+12.4%]
BM_UFlat/16 83448 83424 8383 1.3GB/s pb [ +5.7%]
BM_UFlat/17 256958 256963 2723 684.1MB/s gaviota [ +7.9%]
BM_UValidate/0 42795 42796 16351 2.2GB/s html [+25.8%]
BM_UValidate/1 490672 490622 1427 1.3GB/s urls [+22.7%]
BM_UValidate/2 237 237 2950297 499.0GB/s jpg [+24.9%]
BM_UValidate/3 14610 14611 47901 6.0GB/s pdf [+26.8%]
BM_UValidate/4 171973 171990 4071 2.2GB/s html4 [+25.7%]
git-svn-id: https://snappy.googlecode.com/svn/trunk@38 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit d0ee043bc50c62c5b5ff3da044f0b5567257407d
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue May 17 08:48:25 2011 +0000
Fix the numbering of the headlines in the Snappy format description.
R=csilvers
DELTA=4 (0 added, 0 deleted, 4 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1906
git-svn-id: https://snappy.googlecode.com/svn/trunk@37 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 6c7053871fbdb459c9c14287a138d7f82d6d84a1
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon May 16 08:59:18 2011 +0000
Fix public issue #32: Add compressed format documentation for Snappy.
This text is new, but an earlier version from Zeev Tarantov was used
as reference.
R=csilvers
DELTA=112 (111 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1867
git-svn-id: https://snappy.googlecode.com/svn/trunk@36 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit a1f9f9973d127992f341d442969c86fd9a0847c9
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon May 9 21:29:02 2011 +0000
Fix public issue #39: Pick out the median runs based on CPU time,
not real time. Also, use nth_element instead of sort, since we
only need one element.
R=csilvers
DELTA=5 (3 added, 0 deleted, 2 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1799
git-svn-id: https://snappy.googlecode.com/svn/trunk@35 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f7b105683c074cdf233740089e245e43f63e7e55
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon May 9 21:28:45 2011 +0000
Fix public issue #38: Make the microbenchmark framework handle
properly cases where gettimeofday() can stand return the same
result twice (as sometimes on GNU/Hurd) or go backwards
(as when the user adjusts the clock). We avoid a division-by-zero,
and put a lower bound on the number of iterations -- the same
amount as we use to calibrate.
We should probably use CLOCK_MONOTONIC for platforms that support
it, to be robust against clock adjustments; we already use Windows'
monotonic timers. However, that's for a later changelist.
R=csilvers
DELTA=7 (5 added, 0 deleted, 2 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1798
git-svn-id: https://snappy.googlecode.com/svn/trunk@34 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit d8d481427a05b88cdb0810c29bf400153595c423
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue May 3 23:22:52 2011 +0000
Fix public issue #37: Only link snappy_unittest against -lz and other autodetected
libraries, not libsnappy.so (which doesn't need any such dependency).
R=csilvers
DELTA=20 (14 added, 0 deleted, 6 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1710
git-svn-id: https://snappy.googlecode.com/svn/trunk@33 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit bcecf195c0aeb2c98144d3d54b4d8d228774f50d
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue May 3 23:22:33 2011 +0000
Release Snappy 1.0.2, to get the license change and various other fixes into
a release.
R=csilvers
DELTA=239 (236 added, 0 deleted, 3 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1709
git-svn-id: https://snappy.googlecode.com/svn/trunk@32 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 84d9f642025cda672dda0d94a8008f094500aaa6
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Apr 26 12:34:55 2011 +0000
Fix public issue #30: Stop using gettimeofday() altogether on Win32,
as MSVC doesn't include it. Replace with QueryPerformanceCounter(),
which is monotonic and probably reasonably high-resolution.
(Some machines have traditionally had bugs in QPC, but they should
be relatively rare these days, and there's really no much better
alternative that I know of.)
R=csilvers
DELTA=74 (55 added, 19 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1556
git-svn-id: https://snappy.googlecode.com/svn/trunk@31 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 3d8e71df8d30f980d71d4c784ebfc5ff62d5b0cb
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Tue Apr 26 12:34:37 2011 +0000
Fix public issue #31: Don't reset PATH in autogen.sh; instead, do the trickery
we need for our own build system internally.
R=csilvers
DELTA=16 (13 added, 1 deleted, 2 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1555
git-svn-id: https://snappy.googlecode.com/svn/trunk@30 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 73987351de54c88e2fc3f5dcdeceb47708df3585
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Apr 15 22:55:56 2011 +0000
When including <windows.h>, define WIN32_LEAN_AND_MEAN first,
so we won't pull in macro definitions of things like min() and max(),
which can conflict with <algorithm>.
R=csilvers
DELTA=1 (1 added, 0 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1485
git-svn-id: https://snappy.googlecode.com/svn/trunk@29 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit fb7e0eade471a20b009720a84fea0af1552791d5
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon Apr 11 09:07:01 2011 +0000
Fix public issue #29: Write CPU timing code for Windows, based on GetProcessTimes()
instead of getursage().
I thought I'd already committed this patch, so that the 1.0.1 release already
would have a Windows-compatible snappy_unittest, but I'd seemingly deleted it
instead, so this is a reconstruction.
R=csilvers
DELTA=43 (39 added, 3 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1295
git-svn-id: https://snappy.googlecode.com/svn/trunk@28 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit c67fa0c755a329000da5546fff79089d62ac2f82
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Apr 8 09:51:53 2011 +0000
Include C bindings of Snappy, contributed by Martin Gieseking.
I've made a few changes since Martin's version; mostly style nits, but also
a semantic change -- most functions that return bool in the C++ version now
return an enum, to better match typical C (and zlib) semantics.
I've kept the copyright notice, since Martin is obviously the author here;
he has signed the contributor license agreement, though, so this should not
hinder Google's use in the future.
We'll need to update the libtool version number to match the added interface,
but as of http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
I'm going to wait until public release.
R=csilvers
DELTA=238 (233 added, 0 deleted, 5 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1294
git-svn-id: https://snappy.googlecode.com/svn/trunk@27 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 56be85cb9ae06f2e92180ae2575bdd10c012ab73
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Apr 7 16:36:43 2011 +0000
Replace geo.protodata with a newer version.
The data compresses/decompresses slightly faster than the old data, and has
similar density.
R=lookingbill
DELTA=1 (0 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1288
git-svn-id: https://snappy.googlecode.com/svn/trunk@26 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 3dd93f3ec74df54a37f68bffabb058ac757bbe72
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 30 20:27:53 2011 +0000
Fix public issue #27: Add HAVE_CONFIG_H tests around the config.h
inclusion in snappy-stubs-internal.h, which eases compiling outside the
automake/autoconf framework.
R=csilvers
DELTA=5 (4 added, 1 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1152
git-svn-id: https://snappy.googlecode.com/svn/trunk@25 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f67bcaa61006da8b325a7ed9909a782590971815
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 30 20:27:39 2011 +0000
Fix public issue #26: Take memory allocation and reallocation entirely out of the
Measure() loop. This gives all algorithms a small speed boost, except Snappy which
already didn't do reallocation (so the measurements were slightly biased in its
favor).
R=csilvers
DELTA=92 (69 added, 9 deleted, 14 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1151
git-svn-id: https://snappy.googlecode.com/svn/trunk@24 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit cc333c1c5cc4eabceceb9848ff3cac6c604ecbc6
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 30 20:25:09 2011 +0000
Renamed "namespace zippy" to "namespace snappy" to reduce
the differences from the opensource code. Will make it easier
in the future to mix-and-match third-party code that uses
snappy with google code.
Currently, csearch shows that the only external user of
"namespace zippy" is some bigtable code that accesses
a TEST variable, which is temporarily kept in the zippy
namespace.
R=sesse
DELTA=123 (18 added, 3 deleted, 102 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1150
git-svn-id: https://snappy.googlecode.com/svn/trunk@23 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit f19fb07e6dc79d6857e37df572dba25ff30fc8f3
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Mon Mar 28 22:17:04 2011 +0000
Put back the final few lines of what was truncated during the
license header change.
R=csilvers
DELTA=5 (4 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1094
git-svn-id: https://snappy.googlecode.com/svn/trunk@22 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 7e8ca8f8315fc2ecb4eea19db695039ab2ca43a0
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Sat Mar 26 02:34:34 2011 +0000
Change on 2011-03-25 19:18:00-07:00 by sesse
Replace the Apache 2.0 license header by the BSD-type license header;
somehow a lot of the files were missed in the last round.
R=dannyb,csilvers
DELTA=147 (74 added, 2 deleted, 71 changed)
Change on 2011-03-25 19:25:07-07:00 by sesse
Unbreak the build; the relicensing removed a bit too much (only comments
were intended, but I also accidentially removed some of the top lines of
the actual source).
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1072
git-svn-id: https://snappy.googlecode.com/svn/trunk@21 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit b4bbc1041b35d844ec26fbae25f2864995361fd8
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Mar 25 16:14:41 2011 +0000
Change Snappy from the Apache 2.0 to a BSD-type license.
R=dannyb
DELTA=328 (80 added, 184 deleted, 64 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1061
git-svn-id: https://snappy.googlecode.com/svn/trunk@20 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit c47640c510eb11cf8913edfa34f667bceb3a4401
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Mar 25 00:39:01 2011 +0000
Release Snappy 1.0.1, to soup up all the various small changes
that have been made since release.
R=csilvers
DELTA=266 (260 added, 0 deleted, 6 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1057
git-svn-id: https://snappy.googlecode.com/svn/trunk@19 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit b1dc1f643eaff897a5ce135f525799b99687b118
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Mar 24 19:15:54 2011 +0000
Fix a microbenchmark crash on mingw32; seemingly %lld is not universally
supported on Windows, and %I64d is recommended instead.
R=csilvers
DELTA=6 (5 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1034
git-svn-id: https://snappy.googlecode.com/svn/trunk@18 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 98004ca9afc62a3279dfe9d9a359083f61db437f
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Mar 24 19:15:27 2011 +0000
Fix public issue #19: Fix unit test when Google Test is installed but the
gflags package isn't (Google Test is not properly initialized).
Patch by Martin Gieseking.
R=csilvers
DELTA=2 (1 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1033
git-svn-id: https://snappy.googlecode.com/svn/trunk@17 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 444a6c5f72d6f8d8f7213a5bcc08b26606eb9934
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Mar 24 19:13:57 2011 +0000
Make the unit test work on systems without mmap(). This is required for,
among others, Windows support. For Windows in specific, we could have used
CreateFileMapping/MapViewOfFile, but this should at least get us a bit closer
to compiling, and is of course also relevant for embedded systems with no MMU.
(Part 2/2)
R=csilvers
DELTA=15 (12 added, 3 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1032
git-svn-id: https://snappy.googlecode.com/svn/trunk@16 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 2e182e9bb840737f9cd8817e859dc17a82f2c16b
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Thu Mar 24 19:12:27 2011 +0000
Make the unit test work on systems without mmap(). This is required for,
among others, Windows support. For Windows in specific, we could have used
CreateFileMapping/MapViewOfFile, but this should at least get us a bit closer
to compiling, and is of course also relevant for embedded systems with no MMU.
(Part 1/2)
R=csilvers
DELTA=9 (8 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1031
git-svn-id: https://snappy.googlecode.com/svn/trunk@15 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 48662cbb7f81533977334629790d346220084527
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 23:17:36 2011 +0000
Fix public issue #12: Don't keep autogenerated auto* files in Subversion;
it causes problems with others sending patches etc..
We can't get this 100% hermetic anyhow, due to files like lt~obsolete.m4,
so we can just as well go cleanly in the other direction.
R=csilvers
DELTA=21038 (0 added, 21036 deleted, 2 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=1012
git-svn-id: https://snappy.googlecode.com/svn/trunk@14 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 9e4717a586149c9538b353400312bab5ab5458c4
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 17:50:49 2011 +0000
Fix public issue tracker bug #3: Call AC_SUBST([LIBTOOL_DEPS]), or the rule
to rebuild libtool in Makefile.am won't work.
R=csilvers
DELTA=1 (1 added, 0 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=997
git-svn-id: https://snappy.googlecode.com/svn/trunk@13 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 519c822a34a91a0c0eb32d98e9686ee7d9cd6651
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:16:39 2011 +0000
Fix public issue #10: Don't add GTEST_CPPFLAGS to snappy_unittest_CXXFLAGS;
it's not needed (CPPFLAGS are always included when compiling).
R=csilvers
DELTA=1 (0 added, 1 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=994
git-svn-id: https://snappy.googlecode.com/svn/trunk@12 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit ea6b936378583cba730c33c8a53776edc1782208
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:16:18 2011 +0000
Fix public issue #9: Add -Wall -Werror to automake flags.
(This concerns automake itself, not the C++ compiler.)
R=csilvers
DELTA=4 (3 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=993
git-svn-id: https://snappy.googlecode.com/svn/trunk@11 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit e3ca06af253094b1c3a8eae508cd97accf077535
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:13:37 2011 +0000
Fix a typo in the Snappy README file.
R=csilvers
DELTA=1 (0 added, 0 deleted, 1 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=992
git-svn-id: https://snappy.googlecode.com/svn/trunk@10 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 39d27bea23873abaa663e884261386b17b058f20
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:13:13 2011 +0000
Fix public issue #6: Add a --with-gflags for disabling gflags autodetection
and using a manually given setting (use/don't use) instead.
R=csilvers
DELTA=16 (13 added, 0 deleted, 3 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=991
git-svn-id: https://snappy.googlecode.com/svn/trunk@9 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 60add43d99c1c31aeecd895cb555ad6f6520608e
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:12:44 2011 +0000
Fix public issue #5: Replace the EXTRA_LIBSNAPPY_LDFLAGS setup with something
slightly more standard, that also doesn't leak libtool command-line into
configure.ac.
R=csilvers
DELTA=7 (0 added, 4 deleted, 3 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=990
git-svn-id: https://snappy.googlecode.com/svn/trunk@8 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit a8dd1700879ad646106742aa0e9c3a48dc07b01d
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:12:22 2011 +0000
Fix public issue #4: Properly quote all macro arguments in configure.ac.
R=csilvers
DELTA=16 (0 added, 0 deleted, 16 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=989
git-svn-id: https://snappy.googlecode.com/svn/trunk@7 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 79752dd7033658e28dc894de55012bdf2c9afca3
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:11:54 2011 +0000
Fix public issue #7: Don't use internal variables named ac_*, as those belong
to autoconf's namespace.
R=csilvers
DELTA=6 (0 added, 0 deleted, 6 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=988
git-svn-id: https://snappy.googlecode.com/svn/trunk@6 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 46e39fb20c297129494b969ac4ea64fcd04b4fa0
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:11:09 2011 +0000
Add missing licensing headers to a few files. (Part 2/2.)
R=csilvers
DELTA=12 (12 added, 0 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=987
git-svn-id: https://snappy.googlecode.com/svn/trunk@5 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 3e764216fc8edaafca480443b90e55c14eaae2c2
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:10:39 2011 +0000
Add mising licensing headers to a few files. (Part 1/2.)
R=csilvers
DELTA=24 (24 added, 0 deleted, 0 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=986
git-svn-id: https://snappy.googlecode.com/svn/trunk@4 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 9a59f183c8ffec62dcdabd3499d0d515e44e4ef0
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Wed Mar 23 11:10:04 2011 +0000
Use the correct license file for the Apache 2.0 license;
spotted by Florian Weimer.
R=csilvers
DELTA=202 (174 added, 0 deleted, 28 changed)
Revision created by MOE tool push_codebase.
MOE_MIGRATION=985
git-svn-id: https://snappy.googlecode.com/svn/trunk@3 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 28a64402392c791905d6e1384ea1b48a5cb0b281
Author: snappy.mirrorbot@gmail.com <snappy.mirrorbot@gmail.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Mar 18 17:14:15 2011 +0000
Revision created by MOE tool push_codebase.
MOE_MIGRATION=
git-svn-id: https://snappy.googlecode.com/svn/trunk@2 03e5f5b5-db94-4691-08a0-1a8bf15f6143
commit 7c3c6077b72b4ae2237267a20f640b55e9a90569
Author: sesse@google.com <sesse@google.com@03e5f5b5-db94-4691-08a0-1a8bf15f6143>
Date: Fri Mar 18 17:13:52 2011 +0000
Create trunk directory.
git-svn-id: https://snappy.googlecode.com/svn/trunk@1 03e5f5b5-db94-4691-08a0-1a8bf15f6143
Something went wrong with that request. Please try again.