Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

309 lines (279 sloc) 7.882 kb
#!/bin/sh
# A word about this shell script:
#
# It must work everywhere, including on systems that lack
# a /bin/bash, map 'sh' to ksh, ksh97, bash, ash, or zsh,
# and potentially have either a posix shell or bourne
# shell living at /bin/sh.
#
# See this helpful document on writing portable shell scripts:
# http://www.gnu.org/s/hello/manual/autoconf/Portable-Shell.html
#
# The only shell it won't ever work on is cmd.exe.
if [ "x$0" = "xsh" ]; then
# run as curl | sh
# on some systems, you can just do cat>npm-install.sh
# which is a bit cuter. But on others, &1 is already closed,
# so catting to another script file won't do anything.
curl -s https://npmjs.org/install.sh > npm-install-$$.sh
sh npm-install-$$.sh
ret=$?
rm npm-install-$$.sh
exit $ret
fi
# See what "npm_config_*" things there are in the env,
# and make them permanent.
# If this fails, it's not such a big deal.
configures="`env | grep 'npm_config_' | sed -e 's|^npm_config_||g'`"
npm_config_loglevel="error"
if [ "x$npm_debug" = "x" ]; then
(exit 0)
else
echo "Running in debug mode."
echo "Note that this requires bash or zsh."
set -o xtrace
set -o pipefail
npm_config_loglevel="verbose"
fi
export npm_config_loglevel
# make sure that node exists
node=`which node 2>&1`
ret=$?
if [ $ret -eq 0 ] && [ -x "$node" ]; then
(exit 0)
else
echo "npm cannot be installed without nodejs." >&2
echo "Install node first, and then try again." >&2
echo "" >&2
echo "Maybe node is installed, but not in the PATH?" >&2
echo "Note that running as sudo can change envs." >&2
echo ""
echo "PATH=$PATH" >&2
exit $ret
fi
# set the temp dir
TMP="${TMPDIR}"
if [ "x$TMP" = "x" ]; then
TMP="/tmp"
fi
TMP="${TMP}/npm.$$"
rm -rf "$TMP" || true
mkdir "$TMP"
if [ $? -ne 0 ]; then
echo "failed to mkdir $TMP" >&2
exit 1
fi
BACK="$PWD"
ret=0
tar="${TAR}"
if [ -z "$tar" ]; then
tar="${npm_config_tar}"
fi
if [ -z "$tar" ]; then
tar=`which tar 2>&1`
ret=$?
fi
if [ $ret -eq 0 ] && [ -x "$tar" ]; then
echo "tar=$tar"
echo "version:"
$tar --version
ret=$?
fi
if [ $ret -eq 0 ]; then
(exit 0)
else
echo "No suitable tar program found."
exit 1
fi
# Try to find a suitable make
# If the MAKE environment var is set, use that.
# otherwise, try to find gmake, and then make.
# If no make is found, then just execute the necessary commands.
# XXX For some reason, make is building all the docs every time. This
# is an annoying source of bugs. Figure out why this happens.
MAKE=NOMAKE
if [ "x$MAKE" = "x" ]; then
make=`which gmake 2>&1`
if [ $? -eq 0 ] && [ -x $make ]; then
(exit 0)
else
make=`which make 2>&1`
if [ $? -eq 0 ] && [ -x $make ]; then
(exit 0)
else
make=NOMAKE
fi
fi
else
make="$MAKE"
fi
if [ -x "$make" ]; then
(exit 0)
else
# echo "Installing without make. This may fail." >&2
make=NOMAKE
fi
# If there's no bash, then don't even try to clean
if [ -x "/bin/bash" ]; then
(exit 0)
else
clean="no"
fi
node_version=`"$node" --version 2>&1`
ret=$?
if [ $ret -ne 0 ]; then
echo "You need node to run this program." >&2
echo "node --version reports: $node_version" >&2
echo "with exit code = $ret" >&2
echo "Please install node before continuing." >&2
exit $ret
fi
t="${npm_install}"
if [ -z "$t" ]; then
# switch based on node version.
# note that we can only use strict sh-compatible patterns here.
case $node_version in
0.[0123].* | v0.[0123].*)
echo "You are using an outdated and unsupported version of" >&2
echo "node ($node_version). Please update node and try again." >&2
exit 99
;;
v0.[45].* | 0.[45].*)
echo "install npm@1.0"
t=1.0
;;
v0.[678].* | 0.[678].*)
echo "install npm@1.1"
t=1.1
;;
*)
echo "install npm@latest"
t="latest"
;;
esac
fi
# the npmca cert
cacert='
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
'
echo "$cacert" > "$TMP/cafile.crt"
cacert="$TMP/cafile.crt"
# need to echo "" after, because Posix sed doesn't treat EOF
# as an implied end of line.
url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
| sed -e 's/^.*tarball":"//' \
| sed -e 's/".*$//'`
ret=$?
if [ "x$url" = "x" ]; then
ret=125
# try without the -e arg to sed.
url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
| sed 's/^.*tarball":"//' \
| sed 's/".*$//'`
ret=$?
if [ "x$url" = "x" ]; then
ret=125
fi
fi
if [ $ret -ne 0 ]; then
echo "Failed to get tarball url for npm/$t" >&2
exit $ret
fi
echo "fetching: $url" >&2
cd "$TMP" \
&& curl -SsL --cacert "$cacert" "$url" \
| $tar -xzf - \
&& rm "$cacert" \
&& cd "$TMP"/* \
&& (req=`"$node" bin/read-package-json.js package.json engines.node`
if [ -d node_modules ]; then
"$node" node_modules/semver/bin/semver -v "$node_version" -r "$req"
ret=$?
else
"$node" bin/semver.js -v "$node_version" -r "$req"
ret=$?
fi
if [ $ret -ne 0 ]; then
echo "You need node $req to run this program." >&2
echo "node --version reports: $node_version" >&2
echo "Please upgrade node before continuing." >&2
exit $ret
fi) \
&& (ver=`"$node" bin/read-package-json.js package.json version`
isnpm10=0
if [ $ret -eq 0 ]; then
req=`"$node" bin/read-package-json.js package.json engines.node`
if [ -d node_modules ]; then
if "$node" node_modules/semver/bin/semver -v "$ver" -r "1"
then
isnpm10=1
fi
else
if "$node" bin/semver -v "$ver" -r ">=1.0"; then
isnpm10=1
fi
fi
fi
ret=0
if [ $isnpm10 -eq 1 ] && [ -f "scripts/clean-old.sh" ]; then
if [ "x$skipclean" = "x" ]; then
(exit 0)
else
clean=no
fi
if [ "x$clean" = "xno" ] \
|| [ "x$clean" = "xn" ]; then
echo "Skipping 0.x cruft clean" >&2
ret=0
elif [ "x$clean" = "xy" ] || [ "x$clean" = "xyes" ]; then
NODE="$node" /bin/bash "scripts/clean-old.sh" "-y"
ret=$?
else
NODE="$node" /bin/bash "scripts/clean-old.sh" </dev/tty
ret=$?
fi
fi
if [ $ret -ne 0 ]; then
echo "Aborted 0.x cleanup. Exiting." >&2
exit $ret
fi) \
&& (if [ "x$configures" = "x" ]; then
(exit 0)
else
echo "./configure "$configures
echo "$configures" > npmrc
fi) \
&& (if [ "$make" = "NOMAKE" ]; then
(exit 0)
elif "$make" uninstall install; then
(exit 0)
else
make="NOMAKE"
fi
if [ "$make" = "NOMAKE" ]; then
"$node" cli.js rm npm -gf
"$node" cli.js install -gf
fi) \
&& cd "$BACK" \
&& rm -rf "$TMP" \
&& echo "It worked"
ret=$?
if [ $ret -ne 0 ]; then
echo "It failed" >&2
fi
exit $ret
Jump to Line
Something went wrong with that request. Please try again.