Skip to content
master
Go to file
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
 
 
res
 
 
 
 
 
 
 
 
 
 

README.md

RJ45-LED-Breakout

Description

Simple breakout board for an RJ45 with LEDs. Has two 0805 resistor pads tied to Vin with pins for LED1/2-. Has solder pads for both shield legs to optionally tie to ground. Intended for use with Amphenol RJHSE-548x series. You can find this project on GitHub. Fits breadboard well with headers 0.9" apart.

RJ45-LED-Breakout Kit

Production

The board measured 0.65x1.20in (17x30mm) and was designed for production at OSH Park. The OSHPark DRU is located in the res/ folder.

The boards can be purchased here @ $3.90 for three.

Parts

All parts on this board are from the LoganSmith-Eagle-Library available on GitHub (work in progress).

The BOM is located in the release folder, all parts are sourced from Digi-Key.

Project Structure

This project adheres to this structure:

[ProjectName]
	README.md
	[release]
		[Major.Minor]
			ProjectName_BOM_Major.Minor.xls or ProjectName_BOM_BOM_Major.Minor.csv
			ProjectName_schematic_Major.Minor.pdf
			ProjectName_board-<top/mid#/bottom>_Major.Minor.png
			ProjectName_Major.Minor.sch
			ProjectName_Major.Minor.brd
			[Gerbers]
				...
		...
	[src]
		[Major.0]
			BoardName.sch
			BoardName.brd
			BOM.xls or BOM.csv
		[Major+1.0]
			...
		...
	[lib]
		...
	[res]
		Manufacturer.dru
		Manufacturer.cam

About

A breakout for the RJ45 connector with LEDs.

Resources

License

Releases

No releases published

Packages

No packages published
You can’t perform that action at this time.