Skip to content
This repository
file 158 lines (149 sloc) 6.37 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
# This file provides configuration information about non-Python dependencies for
# numpy.distutils-using packages. Create a file like this called "site.cfg" next
# to your package's setup.py file and fill in the appropriate sections. Not all
# packages will use all sections so you should leave out sections that your
# package does not use.

# To assist automatic installation like easy_install, the user's home directory
# will also be checked for the file ~/.numpy-site.cfg .

# The format of the file is that of the standard library's ConfigParser module.
#
# http://www.python.org/doc/current/lib/module-ConfigParser.html
#
# Each section defines settings that apply to one particular dependency. Some of
# the settings are general and apply to nearly any section and are defined here.
# Settings specific to a particular section will be defined near their section.
#
# libraries
# Comma-separated list of library names to add to compile the extension
# with. Note that these should be just the names, not the filenames. For
# example, the file "libfoo.so" would become simply "foo".
# libraries = lapack,f77blas,cblas,atlas
#
# library_dirs
# List of directories to add to the library search path when compiling
# extensions with this dependency. Use the character given by os.pathsep
# to separate the items in the list. Note that this character is known to
# vary on some unix-like systems; if a colon does not work, try a comma.
# This also applies to include_dirs and src_dirs (see below).
# On UN*X-type systems (OS X, most BSD and Linux systems):
# library_dirs = /usr/lib:/usr/local/lib
# On Windows:
# library_dirs = c:\mingw\lib,c:\atlas\lib
# On some BSD and Linux systems:
# library_dirs = /usr/lib,/usr/local/lib
#
# include_dirs
# List of directories to add to the header file earch path.
# include_dirs = /usr/include:/usr/local/include
#
# src_dirs
# List of directories that contain extracted source code for the
# dependency. For some dependencies, numpy.distutils will be able to build
# them from source if binaries cannot be found. The FORTRAN BLAS and
# LAPACK libraries are one example. However, most dependencies are more
# complicated and require actual installation that you need to do
# yourself.
# src_dirs = /home/rkern/src/BLAS_SRC:/home/rkern/src/LAPACK_SRC
#
# search_static_first
# Boolean (one of (0, false, no, off) for False or (1, true, yes, on) for
# True) to tell numpy.distutils to prefer static libraries (.a) over
# shared libraries (.so). It is turned off by default.
# search_static_first = false

# Defaults
# ========
# The settings given here will apply to all other sections if not overridden.
# This is a good place to add general library and include directories like
# /usr/local/{lib,include}
#
#[DEFAULT]
#library_dirs = /usr/local/lib
#include_dirs = /usr/local/include

# Atlas
# -----
# Atlas is an open source optimized implementation of the BLAS and Lapack
# routines. Numpy will try to build against Atlas by default when available in
# the system library dirs. To build numpy against a custom installation of
# Atlas you can add an explicit section such as the following. Here we assume
# that Atlas was configured with ``prefix=/opt/atlas``.
#
# [atlas]
# library_dirs = /opt/atlas/lib
# include_dirs = /opt/atlas/include

# OpenBLAS
# --------
# OpenBLAS is another open source optimized implementation of BLAS and Lapack
# and can be seen as an alternative to Atlas. To build numpy against OpenBLAS
# instead of Atlas, use this section instead of the above, adjusting as needed
# for your configuration (in the following example we installed OpenBLAS with
# ``make install PREFIX=/opt/OpenBLAS``.
#
# **Warning**: OpenBLAS, by default, is built in multithreaded mode. Due to the
# way Python's multiprocessing is implemented, a multithreaded OpenBLAS can
# cause programs using both to hang as soon as a worker process is forked on
# POSIX systems (Linux, Mac).
# This is fixed in Openblas 0.2.9 for the pthread build, the OpenMP build using
# GNU openmp is as of gcc-4.9 not fixed yet.
# Python 3.4 will introduce a new feature in multiprocessing, called the
# "forkserver", which solves this problem. For older versions, make sure
# OpenBLAS is built using pthreads or use Python threads instead of
# multiprocessing.
# (This problem does not exist with multithreaded ATLAS.)
#
# http://docs.python.org/3.4/library/multiprocessing.html#contexts-and-start-methods
# https://github.com/xianyi/OpenBLAS/issues/294
#
# [openblas]
# libraries = openblas
# library_dirs = /opt/OpenBLAS/lib
# include_dirs = /opt/OpenBLAS/include

# MKL
#----
# MKL is Intel's very optimized yet proprietary implementation of BLAS and
# Lapack.
# For recent (9.0.21, for example) mkl, you need to change the names of the
# lapack library. Assuming you installed the mkl in /opt, for a 32 bits cpu:
# [mkl]
# library_dirs = /opt/intel/mkl/9.1.023/lib/32/
# lapack_libs = mkl_lapack
#
# For 10.*, on 32 bits machines:
# [mkl]
# library_dirs = /opt/intel/mkl/10.0.1.014/lib/32/
# lapack_libs = mkl_lapack
# mkl_libs = mkl, guide

# UMFPACK
# -------
# The UMFPACK library is used in scikits.umfpack to factor large sparse matrices.
# It, in turn, depends on the AMD library for reordering the matrices for
# better performance. Note that the AMD library has nothing to do with AMD
# (Advanced Micro Devices), the CPU company.
#
# UMFPACK is not needed for numpy or scipy.
#
# http://www.cise.ufl.edu/research/sparse/umfpack/
# http://www.cise.ufl.edu/research/sparse/amd/
# http://scikits.appspot.com/umfpack
#
#[amd]
#amd_libs = amd
#
#[umfpack]
#umfpack_libs = umfpack

# FFT libraries
# -------------
# There are two FFT libraries that we can configure here: FFTW (2 and 3) and djbfft.
# Note that these libraries are not needed for numpy or scipy.
#
# http://fftw.org/
# http://cr.yp.to/djbfft.html
#
# Given only this section, numpy.distutils will try to figure out which version
# of FFTW you are using.
#[fftw]
#libraries = fftw3
#
# For djbfft, numpy.distutils will look for either djbfft.a or libdjbfft.a .
#[djbfft]
#include_dirs = /usr/local/djbfft/include
#library_dirs = /usr/local/djbfft/lib
Something went wrong with that request. Please try again.