From f4ce14b8acf6a5c1e646aff998abb056ce28cd41 Mon Sep 17 00:00:00 2001 From: John Doe Date: Fri, 10 Dec 2021 12:24:42 +0800 Subject: [PATCH] Update zh.json (POEditor.com) --- src/i18n/locales/zh.json | 1218 +++++++++++++++++++++++++++++++++++++- 1 file changed, 1208 insertions(+), 10 deletions(-) diff --git a/src/i18n/locales/zh.json b/src/i18n/locales/zh.json index 047621e05..e9079d4c3 100644 --- a/src/i18n/locales/zh.json +++ b/src/i18n/locales/zh.json @@ -28,7 +28,8 @@ "source_endpoint": "源端點", "the_only_endpoint": "唯一端點", "unbind": "解綁", - "write": "寫入" + "write": "寫入", + "destination_endpoint": "Destination endpoint" }, "devicePage": { "about": "關於", @@ -40,7 +41,11 @@ "settings_specific": "設定(具體)", "state": "狀態", "scene": "場景", - "unknown_device": "未知裝置" + "unknown_device": "未知裝置", + "exposes": "Exposes" + }, + "exposes": { + "empty_exposes_definition": "Empty exposes definition" }, "extensions": { "create_new_extension": "建立新擴充", @@ -48,18 +53,428 @@ "select_extension_to_edit": "選擇擴充以編輯" }, "featureDescriptions": { + "Auto off after specific time.": "Auto off after specific time.", + "Away mode": "Away mode", + "Away preset days": "Away preset days", + "Away preset temperature": "Away preset temperature", + "Boost time": "Boost time", + "Brightness of this light": "Brightness of this light", + "Calibration time": "Calibration time", + "Color of this light expressed as hue/saturation": "Color of this light expressed as hue/saturation", + "Color of this light in the CIE 1931 color space (x/y)": "Color of this light in the CIE 1931 color space (x/y)", + "Color temperature after cold power on of this light": "Color temperature after cold power on of this light", + "Color temperature of this light": "Color temperature of this light", + "Comfort temperature": "Comfort temperature", + "Controls the behavior when the device is powered on": "Controls the behavior when the device is powered on", "Controls the behaviour when the device is powered on": "裝置通電時的預設狀態", + "Current temperature measured on the device": "Current temperature measured on the device", "Decoupled mode for center button": "中鍵的解耦模式(將按鍵與繼電器分離)", "Decoupled mode for left button": "左鍵的解耦模式(將按鍵與繼電器分離)", "Decoupled mode for right button": "右鍵的解耦模式(將按鍵與繼電器分離)", + "Eco temperature": "Eco temperature", + "Enable/disable auto lock": "Enable/disable auto lock", + "Enable/disable away mode": "Enable/disable away mode", + "Enables/disables physical input on the device": "Enables/disables physical input on the device", + "Enables/disables window detection on the device": "Enables/disables window detection on the device", + "Enabling prevents both relais being on at the same time": "Enabling prevents both relais being on at the same time", + "Force the valve position": "Force the valve position", + "Indicates if CO (carbon monoxide) is detected": "Indicates if CO (carbon monoxide) is detected", + "Indicates if the battery of this device is almost empty": "Indicates if the battery of this device is almost empty", + "Indicates if the contact is closed (= true) or open (= false)": "Indicates if the contact is closed (= true) or open (= false)", + "Indicates whether the device detected a water leak": "Indicates whether the device detected a water leak", "Indicates whether the device detected occupancy": "是否偵測到有運動", + "Indicates whether the device detected smoke": "Indicates whether the device detected smoke", + "Indicates whether the device is tampered": "Indicates whether the device is tampered", + "Instantaneous measured electrical current": "Instantaneous measured electrical current", "Instantaneous measured power": "即時耗電瓦數", "Link quality (signal strength)": "連接品質 (訊號強度)", + "Maximum temperature": "Maximum temperature", + "Measured electrical potential value": "Measured electrical potential value", "Measured illuminance in lux": "測量到的光照度(單位為lux)", + "Measured relative humidity": "Measured relative humidity", "Measured temperature value": "測量到的溫度", + "Minimum temperature": "Minimum temperature", + "Mode of this device (similar to system_mode)": "Mode of this device (similar to system_mode)", + "Mode of this device": "Mode of this device", + "Motor speed": "Motor speed", + "Offset to be used in the local_temperature": "Offset to be used in the local_temperature", "On/off state of the switch": "開關的狀態", + "On/off state of this light": "On/off state of this light", + "Position of this cover": "Position of this cover", + "Position": "Position", + "Raw measured illuminance": "Raw measured illuminance", + "Recover state after power outage": "Recover state after power outage", "Remaining battery in %": "剩餘電量的百分比", - "Voltage of the battery in millivolts": "測量到的電壓(單位為mV)" + "Side of the cube": "Side of the cube", + "Sum of consumed energy": "Sum of consumed energy", + "Temperature setpoint": "Temperature setpoint", + "The measured atmospheric pressure": "The measured atmospheric pressure", + "Triggered action (e.g. a button click)": "Triggered action (e.g. a button click)", + "Triggers an effect on the light (e.g. make light blink for a few seconds)": "Triggers an effect on the light (e.g. make light blink for a few seconds)", + "Voltage of the battery in millivolts": "測量到的電壓(單位為mV)", + "Week format user for schedule": "Week format user for schedule", + "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP": "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP", + "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)": "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)", + "Calibrates the humidity value (absolute offset), takes into effect on next report of device.": "Calibrates the humidity value (absolute offset), takes into effect on next report of device.", + "Calibrates the illuminance value (percentual offset), takes into effect on next report of device.": "Calibrates the illuminance value (percentual offset), takes into effect on next report of device.", + "Calibrates the illuminance_lux value (percentual offset), takes into effect on next report of device.": "Calibrates the illuminance value (percentual offset), takes into effect on next report of device.", + "Calibrates the pressure value (absolute offset), takes into effect on next report of device.": "Calibrates the pressure value (absolute offset), takes into effect on next report of device.", + "Calibrates the temperature value (absolute offset), takes into effect on next report of device.": "Calibrates the temperature value (absolute offset), takes into effect on next report of device.", + "Countdown in minutes": "Countdown in minutes", + "Direction of movement from the point of view of the radar": "Direction of movement from the point of view of the radar", + "ECO mode (energy saving mode)": "ECO mode (energy saving mode)", + "Indicates whether the device detected presence": "Indicates whether the device detected presence", + "Indicates whether the device detected vibration": "Indicates whether the device detected vibration", + "Moving inside the range of the sensor": "Moving inside the range of the sensor", + "Number of digits after decimal point for humidity, takes into effect on next report of device.": "Number of digits after decimal point for humidity, takes into effect on next report of device.", + "Number of digits after decimal point for illuminance, takes into effect on next report of device.": "Number of digits after decimal point for illuminance, takes into effect on next report of device.", + "Number of digits after decimal point for illuminance_lux, takes into effect on next report of device.": "Number of digits after decimal point for illuminance_lux, takes into effect on next report of device.", + "Number of digits after decimal point for pressure, takes into effect on next report of device.": "Number of digits after decimal point for pressure, takes into effect on next report of device.\n", + "Number of digits after decimal point for temperature, takes into effect on next report of device.": "Number of digits after decimal point for temperature, takes into effect on next report of device.", + "Presets for sensivity for presence and movement": "Presets for sensivity for presence and movement", + "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ": "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.", + "Sends a message the last time occupancy was detected. When setting this for example to [10, 60] a `{\"no_occupancy_since\": 10}` will be send after 10 seconds and a `{\"no_occupancy_since\": 60}` after 60 seconds.": "Sends a message the last time occupancy was detected. When setting this for example to [10, 60] a `{\"no_occupancy_since\": 10}` will be send after 10 seconds and a `{\"no_occupancy_since\": 60}` after 60 seconds.", + "Sensitivity of the radar": "Radar sensitivity", + "Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true).": "Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true).", + "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.": "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.", + "Speed of movement": "Speed of movement", + "This device does not support reporting electric measurements so it is polled instead. The default poll interval is 60 seconds.": "This device does not support reporting electric measurements so it is polled instead. The default poll interval is 60 seconds.", + "Time in seconds after which occupancy is cleared after detecting it (default 90 seconds).": "Time in seconds after which occupancy is cleared after detecting it (default 90 seconds).", + "Time in seconds after which vibration is cleared after detecting it (default 90 seconds).": "Time in seconds after which vibration is cleared after detecting it (default 90 seconds).", + "Window status closed or open ": "Window status closed or open ", + "Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition).": "Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition).", + "Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta.": "Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta.", + "Delta per interval, 20 by default": "Delta per interval, 20 by default", + "Interval duration": "Interval duration", + "Alarm temperature max": "Alarm temperature max", + "Alarm temperature min": "Alarm temperature min", + "Alarm huminity max": "Alarm huminity max", + "Alarm huminity min": "Alarm huminity min", + "Alarm humidity status": "Alarm humidity status", + "Alarm temperature status": "Alarm temperature status", + "Measured soil moisture value": "Measured soil moisture value", + "Operation mode, select \"command\" to enable bindings": "Operation mode, select \"command\" to enable bindings", + "When enabled colors will be synced, e.g. if the light supports both color x/y and color temperature a conversion from color x/y to color temperature will be done when setting the x/y color (default true).": "When enabled colors will be synced, e.g. if the light supports both color x/y and color temperature a conversion from color x/y to color temperature will be done when setting the x/y color (default true).", + "The current running state": "The current running state", + "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open": "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open", + "State of the lock": "State of the lock", + "Actual state of the lock": "Actual state of the lock", + "User ID to set or clear the pincode for": "User ID to set or clear the pincode for", + "Type of user, unrestrictied: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock": "Type of user, unrestrictied: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock", + "Whether the user is enabled/disabled": "Whether the user is enabled/disabled", + "Pincode to set, set pincode to null to clear": "Pincode to set, set pincode to null to clear", + "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold": "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold", + "Click mode, fast: only supports single click which will be send immediately after clicking.multi: supports more events like double and hold": "Click mode, fast: only supports single click which will be send immediately after clicking.multi: supports more events like double and hold", + "Button mode": "Button mode", + "Rotation angle": "Rotation angle", + "Rotation angle speed": "Rotation angle speed", + "Rotation percent": "Rotation percent", + "Rotation percent speed": "Rotation percent speed", + "Rotation time": "Rotation time", + "Enable/disable the power outage memory, this recovers the on/off mode after power failure": "Enable/disable the power outage memory, this recovers the on/off mode after power failure", + "Enable/disable the LED at night": "Enable/disable the LED at night", + "Disables the physical switch button": "Disables the physical switch button", + "Maximum allowed load, turns off if exceeded": "Maximum allowed load, turns off if exceeded", + "Control both relay and usb or only the relay with the physical switch button": "Control both relay and usb or only the relay with the physical switch button", + "Time interval in seconds to report after light changes": "Time interval in seconds to report after light changes", + "Decoupled mode": "Decoupled mode", + "Indicates whether a plug is physically attached. Device does not have to pull power or even be connected electrically (state of this binary switch can be ON even if main power switch is OFF)": "Indicates whether a plug is physically attached. Device does not have to pull power or even be connected electrically (state of this binary switch can be ON even if main power switch is OFF)", + "Measured VOC value": "Measured VOC value", + "Anti flicker mode can be used to solve blinking issues of some lights.Quick mode makes the device respond faster.": "Anti flicker mode can be used to solve blinking issues of some lights.Quick mode makes the device respond faster.", + "Decoupled mode for button": "Decoupled mode for button", + "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)": "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)", + "Enable standby": "Enable standby", + "Display theme": "Display theme", + "Beep volume": "Beep volume", + "LCD brightness (will not persist if auto-brightness is enabled)": "LCD brightness (will not persist if auto-brightness is enabled)", + "Interface language": "Interface language", + "Screen saver style": "Screen saver style", + "Display standby time": "Display standby time", + "Display font size": "Display font size", + "Enable LCD auto brightness": "Enable LCD auto brightness", + "Default display homepage": "Default display homepage", + "Enable screen saver": "Enable screen saver", + "Standby LCD brightness": "Standby LCD brightness", + "Control which switches are available in the switches screen (none disables switches screen)": "Control which switches are available in the switches screen (none disables switches screen)", + "Switch 1 text and icon": "Switch 1 text and icon", + "Icon": "Icon", + "Text": "Text", + "Switch 2 text and icon": "Switch 2 text and icon", + "Switch 3 text and icon": "Switch 3 text and icon", + "Wall switch type": "Wall switch type", + "Temperature of the device": "Temperature of the device", + "Indicates whether the device detected gas": "Indicates whether the device detected gas", + "Test mode activated": "Test mode activated", + "If the power is constantly lower than 2W within half an hour, the plug will be automatically turned off": "If the power is constantly lower than 2W within half an hour, the plug will be automatically turned off", + "Device temperature (polled every 30 min)": "Device temperature (polled every 30 min)", + "Turn the device automatically off when attached device consumes less than 2W for 20 minutes": "Turn the device automatically off when attached device consumes less than 2W for 20 minutes", + "Time in seconds till occupancy goes to false": "Time in seconds till occupancy goes to false", + "Operation mode for left button": "Operation mode for left button", + "Operation mode for right button": "Operation mode for right button", + "Detected by sudden temperature drop or set manually.": "Detected by sudden temperature drop or set manually.", + "Manually set window_open, ~1 minute to take affect.": "Manually set window_open, ~1 minute to take affect.", + "Pin code introduced.": "Pin code introduced.", + "Last action transaction number.": "Last action transaction number.", + "Alarm zone. Default value 0": "Alarm zone. Default value 0", + "Tilt of this cover": "Tilt of this cover", + "Configure genLevelCtrl": "Configure genLevelCtrl", + "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster": "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster", + "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received": "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received", + "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received": "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received", + "Defines the desired startup level for a device when it is supplied with power": "Defines the desired startup level for a device when it is supplied with power", + "Specifies the minimum light output the ballast can achieve.": "Specifies the minimum light output the ballast can achieve.", + "Specifies the maximum light output the ballast can achieve.": "Specifies the maximum light output the ballast can achieve.", + "Specifies the minimum light output of the ballast": "Specifies the minimum light output of the ballast", + "Specifies the maximum light output of the ballast": "Specifies the maximum light output of the ballast", + "Specifies the minimum light output after switching on": "Specifies the minimum light output after switching on", + "The dimmer supports AC forward phase control.": "The dimmer supports AC forward phase control.", + "The dimmer supports AC reverse phase control.": "The dimmer supports AC reverse phase control.", + "The dimmer is capable of measuring the reactanceto distinguish inductive and capacitive loads.": "The dimmer is capable of measuring the reactance to distinguish inductive and capacitive loads.", + "The dimmer is capable of replacing the built-in, default dimming curve.": "The dimmer is capable of replacing the built-in, default dimming curve.", + "The dimmer is capable of detecting an output overload and shutting the output off.": "The dimmer is capable of detecting an output overload and shutting the output off.", + "The dimmer is currently operating in AC forward phase control mode.": "The dimmer is currently operating in AC forward phase control mode.", + "The dimmer is currently operating in AC reverse phase control mode.": "The dimmer is currently operating in AC reverse phase control mode.", + "The output is currently turned off, because the dimmer has detected an overload.": "The output is currently turned off, because the dimmer has detected an overload.", + "The dimmer's reactance discriminator had detected a capacitive load.": "The dimmer's reactance discriminator had detected a capacitive load.", + "The dimmer's reactance discriminator had detected an inductive load.": "The dimmer's reactance discriminator had detected an inductive load.", + "Configures the dimming technique.": "Configures the dimming technique.", + "Operation mode: \"command\" - for group control, \"event\" - for clicks": "Operation mode: \"command\" - for group control, \"event\" - for clicks", + "moving inside the range of the sensor": "moving inside the range of the sensor", + "direction of movement from the point of view of the radar": "direction of movement from the point of view of the radar", + "sensitivity of the radar": "sensitivity of the radar", + "presets for sensivity for presence and movement": "presets for sensivity for presence and movement", + "O-Sensitivity mode": "O-Sensitivity mode", + "V-Sensitivity mode": "V-Sensitivity mode", + "Led status switch": "Led status switch", + "Vacancy delay": "Vacancy delay", + "Light-On luminance prefer": "Light-On luminance prefer", + "Light-Off luminance prefer": "Light-Off luminance prefer", + "Working mode": "Working mode", + "Luminance level": "Luminance level", + "Reference luminance": "Reference luminance", + "Vacant confirm time": "Vacant confirm time", + "Volume of siren": "Volume of siren", + "Switch type settings": "Switch type settings", + "Minimum light brightness": "Minimum light brightness", + "Device valve is open or closed (heating or not)": "Device valve is open or closed (heating or not)", + "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed": "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed", + "Auto MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ": "Auto MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ", + "Enables/disables the status on the device": "Enables/disables the status on the device", + "Open window temperature": "Open window temperature", + "Holiday temperature": "Holiday temperature", + "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).": "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).", + "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C ‚the device display \"AF\".press the pair button to cancel.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C ‚the device display \"AF\".press the pair button to cancel.", + "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\" ‚press the pair button to cancel.": "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\" ‚press the pair button to cancel.", + "Is the device online": "Is the device online", + "The holiday mode( ⛱ ) will automatically start at the set time starting point and run the holiday temperature.": "The holiday mode( ⛱ ) will automatically start at the set time starting point and run the holiday temperature.", + "Auto Mode ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ": "Auto Mode ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ", + "Error status": "Error status", + "The measured CO2 (carbon dioxide) value": "The measured CO2 (carbon dioxide) value", + "The measured formaldehyd value": "The measured formaldehyd value", + "Mode of the warning (sound effect)": "Mode of the warning (sound effect)", + "Sound level": "Sound level", + "Intensity of the strobe": "Intensity of the strobe", + "Turn on/off the strobe (light) during warning": "Turn on/off the strobe (light) during warning", + "Length of the flash cycle": "Length of the flash cycle", + "Duration in seconds of the alarm": "Duration in seconds of the alarm", + "Indicates if the device is moving": "Indicates if the device is moving", + "Accelerometer X value": "Accelerometer X value", + "Accelerometer Y value": "Accelerometer Y value", + "Accelerometer Z value": "Accelerometer Z value", + "Trigger beep for x seconds": "Trigger beep for x seconds", + "Control status LED when load ON": "Control status LED when load ON", + "Control status LED when load OFF": "Control status LED when load OFF", + "Control minimum dimmer brightness": "Control minimum dimmer brightness", + "Control backlight dimming behavior": "Control backlight dimming behavior", + "People count": "People count", + "Icon shown on device displays": "Icon shown on device displays", + "Calibrates valve on next wakeup": "Calibrates valve on next wakeup", + "Controls piloting mode": "Controls piloting mode", + "Controls Capacitive or Inductive Dimming Mode": "Controls Capacitive or Inductive Dimming Mode", + "Auto off after specific time": "Auto off after specific time", + "Auto off timer time left": "Auto off timer time left", + "Time the valve was open when state on": "Time the valve was open when state on", + "Liters of water consumed": "Liters of water consumed", + "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)": "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)", + "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode": "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode", + "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical": "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical", + "Viewing/Display Direction. `false` Horizontal or `true` Vertical": "Viewing/Display Direction. `false` Horizontal or `true` Vertical", + "Not clear how this affects operation. `false` No Heat Available or `true` Heat Available": "Not clear how this affects operation. `false` No Heat Available or `true` Heat Available", + "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request": "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request", + "Values observed are `0` (manual), `1` (schedule) or `2` (externally)": "Values observed are `0` (manual), `1` (schedule) or `2` (externally)", + "Set at maximum 3 hours interval but not more often than every 30 minutes and 0.1 degrees difference. Resets every 3hours to standard. e.g. 21C = 2100 (-8000=undefined).": "Set at maximum 3 hours interval but not more often than every 30 minutes and 0.1 degrees difference. Resets every 3hours to standard. e.g. 21C = 2100 (-8000=undefined).", + "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally": "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally", + "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)": "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)", + "Exercise day of week: 0=Sun...6=Sat, 7=undefined": "Exercise day of week: 0=Sun...6=Sat, 7=undefined", + "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439": "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439", + "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow": "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow", + "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.": "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.", + "Mean radiator load for room calculated by gateway for load balancing purposes": "Mean radiator load for room calculated by gateway for load balancing purposes", + "Load estimate on this radiator": "Load estimate on this radiator", + "Blink green LED on motion detection": "Blink green LED on motion detection", + "Ac louver position of this device": "Ac louver position of this device", + "On/off state of this fan": "On/off state of this fan", + "Mode of this fan": "Mode of this fan", + "Sound volume of the lock": "Sound volume of the lock", + "Auto relock after 7 seconds.": "Auto relock after 7 seconds.", + "Enables/disables frost detection on the device": "Enables/disables frost detection on the device", + "Stop heating": "Stop heating", + "Holiday mode temperature": "Holiday mode temperature", + "Comfort mode temperature": "Comfort mode temperature", + "Eco mode temperature": "Eco mode temperature", + "Open window mode temperature": "Open window mode temperature", + "Boost heating countdown": "Boost heating countdown", + "Do not disturb mode": "Do not disturb mode", + "Power on behavior state": "Power on behavior state", + "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. HOLIDAY MODE ⛱ - In this mode, for example, the vacation mode is set for 10 days and the temperature is setto 15 degrees Celsius. After 10 days, the device will automatically switch to programming mode. TEMPORARY MANUAL MODE - In this mode, ☝ icon will flash. At this time, the device executes the manually set temperature and returns to the weekly programming mode in the next time period. ": "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. HOLIDAY MODE ⛱ - In this mode, for example, the vacation mode is set for 10 days and the temperature is setto 15 degrees Celsius. After 10 days, the device will automatically switch to programming mode. TEMPORARY MANUAL MODE - In this mode, ☝ icon will flash. At this time, the device executes the manually set temperature and returns to the weekly programming mode in the next time period. ", + "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. You can set up to 4 stages of temperature every for WEEKDAY ➀➁➂➃➄, SATURDAY ➅ and SUNDAY ➆.": "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. You can set up to 4 stages of temperature every for WEEKDAY ➀➁➂➃➄, SATURDAY ➅ and SUNDAY ➆.", + "The delta between local_temperature and current_heating_setpoint to trigger Heat. 1-5": "The delta between local_temperature and current_heating_setpoint to trigger Heat. 1-5", + "Maximum temperature limit": "Maximum temperature limit", + "Select temperature sensor to use": "Select temperature sensor to use", + "Mode of the fan": "Mode of the fan", + "Motor options": "Motor options", + "Motor direction": "Motor direction", + "Motor is moving": "Motor is moving", + "Controls behaviour of led/siren on alarm": "Controls behaviour of led/siren on alarm", + "Alarm zone. Default value 23": "Alarm zone. Default value 23", + "Measured eCO2 value": "Measured CO2 value", + "Temperature setpoint automatic": "Temperature setpoint automatic", + "Open window detection temperature": "Open window detection temperature", + "Open window time in minute": "Open window time in minute", + "Unknown binary one": "Unknown binary one", + "Unknown binary two": "Unknown binary two", + "Start away year 20xx": "Start away year 20xx", + "Start away month": "Start away month", + "Start away day": "Start away day", + "Start away hours": "Start away hours", + "Start away minutes": "Start away minutes", + "Temperature 1": "Temperature 1", + "Hour TO for temp 1": "Hour TO for temp 1", + "Minute TO for temp 1": "Minute TO for temp 1", + "Temperature 2": "Temperature 2", + "Hour TO for temp 2": "Hour TO for temp 2", + "Minute TO for temp 2": "Minute TO for temp 2", + "Temperature 3": "Temperature 3", + "Hour TO for temp 3": "Hour TO for temp 3", + "Minute TO for temp 3": "Minute TO for temp 3", + "Temperature 4": "Temperature 4", + "Hour TO for temp 4": "Hour TO for temp 4", + "Minute TO for temp 4": "Minute TO for temp 4", + "Temperature 5": "Temperature 5", + "Hour TO for temp 5": "Hour TO for temp 5", + "Minute TO for temp 5": "Minute TO for temp 5", + "Temperature 6": "Temperature 6", + "Hour TO for temp 6": "Hour TO for temp 6", + "Minute TO for temp 6": "Minute TO for temp 6", + "Temperature 7": "Temperature 7", + "Hour TO for temp 7": "Hour TO for temp 7", + "Minute TO for temp 7": "Minute TO for temp 7", + "Temperature 8": "Temperature 8", + "Hour TO for temp 8": "Hour TO for temp 8", + "Minute TO for temp 8": "Minute TO for temp 8", + "Temperature 9": "Temperature 9", + "Hour TO for temp 9": "Hour TO for temp 9", + "Minute TO for temp 9": "Minute TO for temp 9", + "Enable/disable the power alarm": "Enable/disable the power alarm", + "Specifies the minimum brightness value": "Specifies the minimum brightness value", + "Specifies the maximum brightness value": "Specifies the maximum brightness value", + "Allow the device to change brightness": "Allow the device to change brightness", + "Enable or disable the permanent blue LED": "Enable or disable the permanent blue LED", + "Enables the LED when the light is on": "Enables the LED when the light is on", + "On/off (works only if device is in \"switch\" mode)": "On/off (works only if device is in \"switch\" mode)", + "switch: allow on/off, auto will use wired action via C1/C2 on teleruptor with buttons": "switch: allow on/off, auto will use wired action via C1/C2 on teleruptor with buttons", + "switch: allow on/off, auto will use wired action via C1/C2 on contactor for example with HC/HP": "switch: allow on/off, auto will use wired action via C1/C2 on contactor for example with HC/HP", + "Enabled LED": "Enabled LED", + "PIR keep time 0:5s|1:30s|2:60s|3:180s|4:300s|5:600s|6:1200s|7:1800s": "PIR keep time 0:5s|1:30s|2:60s|3:180s|4:300s|5:600s|6:1200s|7:1800s", + "Illuminance calibration": "Illuminance calibration", + "Reporting interval in minutes": "Reporting interval in minutes", + "Temperature calibration": "Temperature calibration", + "Humidity calibration": "Humidity calibration", + "Enable PIR sensor": "Enable PIR sensor", + "Enabled reporting": "Enabled reporting", + "PIR sensor sensitivity": "PIR sensor sensitivity", + "PIR keep time in seconds": "PIR keep time in seconds", + "Current fan speed": "Current fan speed", + "Measured PM2.5 (particulate matter) concentration": "Measured PM2.5 (particulate matter) concentration", + "Measured air quality": "Measured air quality", + "Filter is older than 6 months and needs replacing": "Filter is older than 6 months and needs replacing", + "Indicates whether the device detected bright light (works only in night mode)": "Indicates whether the device detected bright light (works only in night mode)", + "Prevent changes. `false` = run normally. `true` = prevent from making changes. Must be set to `false` when system_mode = off or `true` for heat": "Prevent changes. `false` = run normally. `true` = prevent from making changes. Must be set to `false` when system_mode = off or `true` for heat", + "Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display": "Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display", + "Measured Hcho value": "Measured Hcho value", + "Air quality index": "Air quality index", + "Measured PM10 (particulate matter) concentration": "Measured PM10 (particulate matter) concentration", + "Valve open percentage (multiple of 10)": "Valve open percentage (multiple of 10)", + "Countdown timer in minutes": "Countdown timer in minutes", + "SOS alarm": "SOS alarm", + "Select between direct control of the valve via the `valve_position` or automatic control of the valve based on the `current_heating_setpoint`. For manual control set the value to 1, for automatic control set the value to 2 (the default). When switched to manual mode the display shows a value from 0 (valve closed) to 100 (valve fully open) and the buttons on the device are disabled.": "Select between direct control of the valve via the `valve_position` or automatic control of the valve based on the `current_heating_setpoint`. For manual control set the value to 1, for automatic control set the value to 2 (the default). When switched to manual mode the display shows a value from 0 (valve closed) to 100 (valve fully open) and the buttons on the device are disabled.", + "Directly control the radiator valve when `trv_mode` is set to 1. The values range from 0 (valve closed) to 255 (valve fully open)": "Directly control the radiator valve when `trv_mode` is set to 1. The values range from 0 (valve closed) to 255 (valve fully open)", + "Displayed text on thermostat display (zone). Max 14 characters": "Displayed text on thermostat display (zone). Max 14 characters", + "Load in W when heating is on (between 0-2000 W). The thermostat uses the value as input to the mean_power calculation.": "Load in W when heating is on (between 0-2000 W). The thermostat uses the value as input to the mean_power calculation.", + "Device in regulator or thermostat mode.": "Device in regulator or thermostat mode.", + "When device is in regulator mode this controls the time between each in/out connection. When device is in thermostat mode this controls the time between each in/out switch when measured temperature is within +-0.5 °C set temperature. Choose a long time for (slow) concrete floors and a short time for (quick) wooden floors.": "When device is in regulator mode this controls the time between each in/out connection. When device is in thermostat mode this controls the time between each in/out switch when measured temperature is within +-0.5 °C set temperature. Choose a long time for (slow) concrete floors and a short time for (quick) wooden floors.", + "Current temperature measured from the floor sensor": "Current temperature measured from the floor sensor", + "Set max floor temperature (between 20-35 °C) when \"supervisor_floor\" is set": "Set max floor temperature (between 20-35 °C) when \"supervisor_floor\" is set", + "Reports average power usage last 10 minutes": "Reports average power usage last 10 minutes", + "When frost guard is ON, it is activated when the thermostat is switched OFF with the ON/OFF button.At the same time, the display will fade and the text \"Frostsikring x °C\" appears in the display and remains until the thermostat is switched on again.": "When frost guard is ON, it is activated when the thermostat is switched OFF with the ON/OFF button.At the same time, the display will fade and the text \"Frostsikring x °C\" appears in the display and remains until the thermostat is switched on again.", + "Turn on or off night setting.": "Turn on or off night setting.", + "Current state": "Current state", + "Select open mode": "Select open mode", + "Enable or disable sound": "Enable or disable sound", + "Time to ring before answer": "Time to ring before answer", + "Time to hold before open": "Time to hold before open", + "Time to open before end": "Time to open before end", + "Time after last bell to finish ring": "Time after last bell to finish ring", + "Reporting interval": "Reporting interval", + "Enable LEDs feedback": "Enable LEDs feedback", + "Enable ABC (Automatic Baseline Correction)": "Enable ABC (Automatic Baseline Correction)", + "Warning (LED2) CO2 level": "Warning (LED2) CO2 level", + "Critical (LED3) CO2 level": "Critical (LED3) CO2 level", + "Adjust temperature": "Adjust temperature", + "Adjust humidity": "Adjust humidity", + "Adjust pressure": "Adjust pressure", + "Current count radioactive pulses per minute": "Current count radioactive pulses per minute", + "Current radiation level": "Current radiation level", + "Enable LED feedback": "Enable LED feedback", + "Enable buzzer feedback": "Enable buzzer feedback", + "Critical radiation level": "Critical radiation level", + "Type of installed tubes": "Type of installed tubes", + "Count of installed tubes": "Count of installed tubes", + "This is applicable if tubes type is set to other": "This is applicable if tubes type is set to other", + "Temperature of the CPU": "Temperature of the CPU", + "Indicates whether the device is being tested": "Indicates whether the device is being tested", + "Set Squawk state": "Set Squawk state", + "Turn on/off the strobe (light) for Squawk": "Turn on/off the strobe (light) for Squawk", + "Max duration of the siren": "Max duration of the siren", + "Manual start of the siren": "Manual start of the siren", + "Pulses per kwh. Default 1000 imp/kWh. Range 0 to 65535": "Pulses per kwh. Default 1000 imp/kWh. Range 0 to 65535", + "Operating mode/probe": "Operating mode/probe", + "Current summation value sent to the display. e.g. 570 = 0,570 kWh": "Current summation value sent to the display. e.g. 570 = 0,570 kWh", + "Is true if communication problem with meter is experienced": "Is true if communication problem with meter is experienced", + "Duration of Siren": "Duration of Siren", + "Manual Start of Siren": "Manual Start of Siren", + "Indicates reason if any fault": "Indicates reason if any fault", + "Indicates whether the device are in fault state": "Indicates whether the device are in fault state", + "Instantaneous measured electrical current on phase B": "Instantaneous measured electrical current on phase B", + "Measured electrical potential value on phase B": "Measured electrical potential value on phase B", + "Instantaneous measured electrical current on phase C": "Instantaneous measured electrical current on phase C", + "Measured electrical potential value on phase C": "Measured electrical potential value on phase C", + "Allow Master PIN Unlock": "Allow Master PIN Unlock", + "Allow RFID to Unlock": "Allow RFID to Unlock", + "Allow Auto Re-Lock": "Allow Auto Re-Lock", + "Lock-Mode of the Lock": "Lock-Mode of the Lock", + "Service Mode of the Lock": "Service Mode of the Lock", + "Absolute min temperature allowed on the device": "Absolute min temperature allowed on the device", + "Absolute max temperature allowed on the device": "Absolute max temperature allowed on the device", + "Min temperature limit set on the device": "Min temperature limit set on the device", + "Max temperature limit set on the device": "Max temperature limit set on the device", + "Danfoss Output Status [Active vs Inactive])": "Danfoss Output Status [Active vs Inactive])", + "Thermostat status": "Thermostat status", + "Regulator Status": "Regulator Status", + "Water Status of Regulator": "Water Status of Regulator", + "Regulator role (Master vs Slave)": "Regulator role (Master vs Slave)", + "State or sensor value": "State or sensor value", + "Manual start of siren": "Manual start of siren" }, "featureNames": { "action": "動作", @@ -78,43 +493,602 @@ "soil_moisture": "土壤濕度", "state": "狀態", "temperature": "溫度", + "tamper": "Tamper", + "action_angle": "Action Angle", + "action_from_side": "Action From Side", + "action_side": "Action Side", + "action_to_side": "Action To Side", + "alarm": "Alarm", + "auto_lock": "Auto lock", "away_mode": "離開模式", + "calibration_time": "Calibration Time", "carbon_monoxide": "一氧化碳", + "child_lock": "Child Lock", "color_hs": "顏色(HS)", "color_temp_startup": "啟動色溫", + "consumer_connected": "Consumer Connected", "current": "電流", "current_heating_setpoint": "目前加熱設定溫度", + "current_level_startup": "Current Level Startup", + "device_temperature": "Device Temperature", "energy": "能源", + "friday_schedule": "Friday Schedule", + "heating": "Heating", + "holidays_schedule": "Holidays Schedule", + "level_config": "Level Config", "local_temperature": "本地溫度", "local_temperature_calibration": "本地溫度校準", + "monday_schedule": "Monday Schedule", + "motion": "Motion", + "motion_direction": "Motion Direction", + "motion_speed": "Motion Speed", + "motor_speed": "Motor Speed", "moving": "移動", + "on_off_transition_time": "On Off Transition Time", "options": "設定", "position": "位置", "power": "電源", + "presence": "Presence", "preset": "預設", + "programming_mode": "Programming Mode", + "program_saturday": "Program (Sat)", + "program_sunday": "Program (Sun)", + "program_weekday": "Program weekday", + "saturday_schedule": "Saturday Schedule", "smoke": "煙霧", + "smoke_density": "Smoke Density", + "state_l1": "State L1", + "state_l2": "State_l2", + "state_l3": "State l3", + "state_l4": "State l4", + "sunday_schedule": "Sunday Schedule", "system_mode": "系統模式", + "thursday_schedule": "Thursday Schedule", + "tuesday_schedule": "Tuesday Schedule", + "valve_detection": "Valve detection", + "vibration": "Vibration", "voltage": "電壓", "water_leak": "漏水", "week": "週", + "window_detection": "Window detection", + "window": "Window", + "workdays_schedule": "Workdays Schedule", "operation_mode": "運作模式", + "pi_heating_demand": "Pi Heating Demand", + "undefined": "undefined", + "x": "X", + "y": "Y", "effect": "效果", "linkquality": "連接質量", + "occupied_heating_setpoint": "Occupied Heating Setpoint", + "running_state": "Running State", "battery": "電量", + "lock_state": "Lock State", + "pin_code": "Pin Code", + "user": "User", + "user_type": "User Type", + "user_enabled": "User Enabled", + "click_mode": "Click Mode", + "action_rotation_angle": "Action Rotation Angle", + "action_rotation_angle_speed": "Action Rotation Angle Speed", + "action_rotation_percent": "Action Rotation Percent", + "action_rotation_percent_speed": "Action Rotation Percent Speed", + "action_rotation_time": "Action Rotation Time", "power_outage_memory": "復電時回復停電前狀態", + "led_disabled_night": "Led Disabled Night", + "button_lock": "Button Lock", + "overload_protection": "Overload Protection", + "button_switch_mode": "Button Switch Mode", "illuminance_lux": "光照度", + "detection_period": "Detection Period", + "voc": "Voc", + "mode_switch": "Mode Switch", + "standby_enabled": "Standby Enabled", + "theme": "Theme", + "beep_volume": "Beep Volume", + "lcd_brightness": "Lcd Brightness", + "language": "Language", + "screen_saver_style": "Screen Saver Style", + "standby_time": "Standby Time", + "font_size": "Font Size", + "lcd_auto_brightness_enabled": "Lcd Auto Brightness Enabled", + "homepage": "Homepage", + "screen_saver_enabled": "Screen Saver Enabled", + "standby_lcd_brightness": "Standby Lcd Brightness", + "available_switches": "Available Switches", + "switch_1_text_icon": "Switch 1 Text Icon", + "switch_1_icon": "Switch 1 Icon", + "switch_1_text": "Switch 1 Text", + "switch_2_text_icon": "Switch 2 Text Icon", + "switch_2_icon": "Switch 2 Icon", + "switch_2_text": "Switch 2 Text", + "switch_3_text_icon": "Switch 3 Text Icon", + "switch_3_icon": "Switch 3 Icon", + "switch_3_text": "Switch 3 Text", + "switch_type": "Switch Type", + "hue": "Hue", + "saturation": "Saturation", + "reverse": "Reverse", "battery_low": "低電量", + "interlock": "Interlock", "strength": "強度", + "sensitivity": "Sensitivity", + "inserted": "Inserted", + "gas": "Gas", + "gas_density": "Gas Density", + "selftest": "Selftest", + "test": "Test", "auto_off": "自動關閉", + "motion_sensitivity": "Motion Sensitivity", + "occupancy_timeout": "Occupancy Timeout", + "window_open": "Window Open", + "window_open_force": "Window Open Force", + "keypad_lockout": "Keypad Lockout", + "action_code": "Action Code", + "action_transaction": "Action Transaction", + "action_zone": "Action Zone", + "tilt": "Tilt", + "on_transition_time": "On Transition Time", + "off_transition_time": "Off Transition Time", + "ballast_physical_minimum_level": "Ballast Physical Minimum Level", + "ballast_physical_maximum_level": "Ballast Physical Maximum Level", + "ballast_minimum_level": "Ballast Minimum Level", + "ballast_maximum_level": "Ballast Maximum Level", + "minimum_on_level": "Minimum On Level", + "capabilities_forward_phase_control": "Capabilities Forward Phase Control", + "capabilities_reverse_phase_control": "Capabilities Reverse Phase Control", + "capabilities_reactance_discriminator": "Capabilities Reactance Discriminator", + "capabilities_configurable_curve": "Capabilities Configurable Curve", + "capabilities_overload_detection": "Capabilities Overload Detection", + "status_forward_phase_control": "Status Forward Phase Control", + "status_reverse_phase_control": "Status Reverse Phase Control", + "status_overload": "Status Overload", + "status_capacitive_load": "Status Capacitive Load", + "status_inductive_load": "Status Inductive Load", + "mode_phase_control": "Mode Phase Control", + "meter_number": "Meter Number", + "trip": "Trip", + "power_on_behaviour": "Power On Behaviour", + "countdown_timer": "Countdown Timer", + "voltage_rms": "Voltage Rms", + "current_average": "Current Average", + "energy_consumed": "Energy Consumed", + "clear_device_data": "Clear Device Data", + "radar_sensitivity": "Radar Sensitivity", + "radar_scene": "Radar Scene", + "o_sensitivity": "O Sensitivity", + "v_sensitivity": "V Sensitivity", + "led_status": "Led Status", + "vacancy_delay": "Vacancy Delay", + "light_on_luminance_prefer": "Light On Luminance Prefer", + "light_off_luminance_prefer": "Light Off Luminance Prefer", + "mode": "Mode", + "luminance_level": "Luminance Level", + "reference_luminance": "Reference Luminance", + "vacant_confirm_time": "Vacant Confirm Time", + "alarm_temperature_max": "Alarm Temperature Max", + "alarm_temperature_min": "Alarm Temperature Min", + "alarm_humidity_max": "Alarm Humidity Max", + "alarm_humidity_min": "Alarm Humidity Min", + "alarm_humidity": "Alarm Humidity", + "alarm_temperature": "Alarm Temperature", + "volume": "Volume", "power_on_behavior": "啟動時預設電源行為", + "min_brightness": "Min Brightness", "max_temperature": "最高溫度", "min_temperature": "最低溫度", + "wednesday_schedule": "Wednesday Schedule", + "boost_heating": "Boost Heating", + "boost_heating_countdown": "Boost Heating Countdown", + "open_window": "Open Window", + "open_window_temperature": "Open Window Temperature", + "holiday_temperature": "Holiday Temperature", "comfort_temperature": "舒適溫度", "eco_temperature": "節能溫度", + "boost_timeset_countdown": "Boost Timeset Countdown", + "frost_protection": "Frost Protection", + "heating_stop": "Heating Stop", + "online": "Online", + "holiday_mode_date": "Holiday Mode Date", + "programming": "Programming", + "schedule_monday": "Schedule Monday", + "schedule_tuesday": "Schedule Tuesday", + "schedule_wednesday": "Schedule Wednesday", + "schedule_thursday": "Schedule Thursday", + "schedule_friday": "Schedule Friday", + "schedule_saturday": "Schedule Saturday", + "schedule_sunday": "Schedule Sunday", + "error_status": "Error Status", + "away_preset_days": "Away Preset Days", + "boost_time": "Boost Time", "force": "力量", + "away_preset_temperature": "Away Preset Temperature", "calibration": "校準", "motor_reversal": "馬達反轉", - "backlight_mode": "背光模式" + "backlight_mode": "背光模式", + "formaldehyd": "Formaldehyd", + "direction": "Direction", + "warning": "Warning", + "level": "Level", + "strobe_level": "Strobe Level", + "strobe": "Strobe", + "strobe_duty_cycle": "Strobe Duty Cycle", + "duration": "Duration", + "x_axis": "X Axis", + "y_axis": "Y Axis", + "z_axis": "Z Axis", + "beep": "Beep", + "led_intensity_on": "Led Intensity On", + "led_intensity_off": "Led Intensity Off", + "minimum_brightness": "Minimum Brightness", + "backlight_auto_dim": "Backlight Auto Dim", + "people": "People", + "zone_mode": "Zone Mode", + "calibrate_valve": "Calibrate Valve", + "valve_calibration_status": "Valve Calibration Status", + "schneider_pilot_mode": "Schneider Pilot Mode", + "dimmer_mode": "Dimmer Mode", + "timer_state": "Timer State", + "timer": "Timer", + "timer_time_left": "Timer Time Left", + "last_valve_open_duration": "Last Valve Open Duration", + "water_consumed": "Water Consumed", + "mounted_mode_active": "Mounted Mode Active", + "mounted_mode_control": "Mounted Mode Control", + "thermostat_vertical_orientation": "Thermostat Vertical Orientation", + "viewing_direction": "Viewing Direction", + "heat_available": "Heat Available", + "heat_required": "Heat Required", + "setpoint_change_source": "Setpoint Change Source", + "external_measured_room_sensor": "External Measured Room Sensor", + "window_open_internal": "Window Open Internal", + "window_open_external": "Window Open External", + "day_of_week": "Day Of Week", + "trigger_time": "Trigger Time", + "algorithm_scale_factor": "Algorithm Scale Factor", + "load_balancing_enable": "Load Balancing Enable", + "load_room_mean": "Load Room Mean", + "load_estimate": "Load Estimate", + "led_indication": "Led Indication", + "device_mode": "Device Mode", + "occupied_cooling_setpoint": "Occupied Cooling Setpoint", + "ac_louver_position": "Ac Louver Position", + "sound_volume": "Sound Volume", + "auto_relock": "Auto Relock", + "power_type": "Power Type", + "humidity_alarm": "Humidity Alarm", + "temperature_alarm": "Temperature Alarm", + "melody": "Melody", + "temperature_min": "Temperature Min", + "temperature_max": "Temperature Max", + "humidity_min": "Humidity Min", + "humidity_max": "Humidity Max", + "frost_detection": "Frost Detection", + "do_not_disturb": "Do Not Disturb", + "color_power_on_behavior": "Color Power On Behavior", + "eco_mode": "Eco Mode", + "boost_heating_countdown_time_set": "Boost Heating Countdown Time Set", + "deadzone_temperature": "Deadzone Temperature", + "max_temperature_limit": "Max Temperature Limit", + "sensor": "Sensor", + "fan_mode": "Fan Mode", + "motor_direction": "Motor Direction", + "alert_behaviour": "Alert Behaviour", + "eco2": "Eco 2", + "current_heating_setpoint_auto": "Current Heating Setpoint Auto", + "detectwindow_temperature": "Detectwindow Temperature", + "detectwindow_timeminute": "Detectwindow Timeminute", + "binary_one": "Binary One", + "binary_two": "Binary Two", + "away_setting": "Away Setting", + "away_preset_year": "Away Preset Year", + "away_preset_month": "Away Preset Month", + "away_preset_day": "Away Preset Day", + "away_preset_hour": "Away Preset Hour", + "away_preset_minute": "Away Preset Minute", + "monday": "Monday", + "monday_temp_1": "Monday Temp 1", + "monday_hour_1": "Monday Hour 1", + "monday_minute_1": "Monday Minute 1", + "monday_temp_2": "Monday Temp 2", + "monday_hour_2": "Monday Hour 2", + "monday_minute_2": "Monday Minute 2", + "monday_temp_3": "Monday Temp 3", + "monday_hour_3": "Monday Hour 3", + "monday_minute_3": "Monday Minute 3", + "monday_temp_4": "Monday Temp 4", + "monday_hour_4": "Monday Hour 4", + "monday_minute_4": "Monday Minute 4", + "monday_temp_5": "Monday Temp 5", + "monday_hour_5": "Monday Hour 5", + "monday_minute_5": "Monday Minute 5", + "monday_temp_6": "Monday Temp 6", + "monday_hour_6": "Monday Hour 6", + "monday_minute_6": "Monday Minute 6", + "monday_temp_7": "Monday Temp 7", + "monday_hour_7": "Monday Hour 7", + "monday_minute_7": "Monday Minute 7", + "monday_temp_8": "Monday Temp 8", + "monday_hour_8": "Monday Hour 8", + "monday_minute_8": "Monday Minute 8", + "monday_temp_9": "Monday Temp 9", + "monday_hour_9": "Monday Hour 9", + "monday_minute_9": "Monday Minute 9", + "tuesday": "Tuesday", + "tuesday_temp_1": "Tuesday Temp 1", + "tuesday_hour_1": "Tuesday Hour 1", + "tuesday_minute_1": "Tuesday Minute 1", + "tuesday_temp_2": "Tuesday Temp 2", + "tuesday_hour_2": "Tuesday Hour 2", + "tuesday_minute_2": "Tuesday Minute 2", + "tuesday_temp_3": "Tuesday Temp 3", + "tuesday_hour_3": "Tuesday Hour 3", + "tuesday_minute_3": "Tuesday Minute 3", + "tuesday_temp_4": "Tuesday Temp 4", + "tuesday_hour_4": "Tuesday Hour 4", + "tuesday_minute_4": "Tuesday Minute 4", + "tuesday_temp_5": "Tuesday Temp 5", + "tuesday_hour_5": "Tuesday Hour 5", + "tuesday_minute_5": "Tuesday Minute 5", + "tuesday_temp_6": "Tuesday Temp 6", + "tuesday_hour_6": "Tuesday Hour 6", + "tuesday_minute_6": "Tuesday Minute 6", + "tuesday_temp_7": "Tuesday Temp 7", + "tuesday_hour_7": "Tuesday Hour 7", + "tuesday_minute_7": "Tuesday Minute 7", + "tuesday_temp_8": "Tuesday Temp 8", + "tuesday_hour_8": "Tuesday Hour 8", + "tuesday_minute_8": "Tuesday Minute 8", + "tuesday_temp_9": "Tuesday Temp 9", + "tuesday_hour_9": "Tuesday Hour 9", + "tuesday_minute_9": "Tuesday Minute 9", + "wednesday": "Wednesday", + "wednesday_temp_1": "Wednesday Temp 1", + "wednesday_hour_1": "Wednesday Hour 1", + "wednesday_minute_1": "Wednesday Minute 1", + "wednesday_temp_2": "Wednesday Temp 2", + "wednesday_hour_2": "Wednesday Hour 2", + "wednesday_minute_2": "Wednesday Minute 2", + "wednesday_temp_3": "Wednesday Temp 3", + "wednesday_hour_3": "Wednesday Hour 3", + "wednesday_minute_3": "Wednesday Minute 3", + "wednesday_temp_4": "Wednesday Temp 4", + "wednesday_hour_4": "Wednesday Hour 4", + "wednesday_minute_4": "Wednesday Minute 4", + "wednesday_temp_5": "Wednesday Temp 5", + "wednesday_hour_5": "Wednesday Hour 5", + "wednesday_minute_5": "Wednesday Minute 5", + "wednesday_temp_6": "Wednesday Temp 6", + "wednesday_hour_6": "Wednesday Hour 6", + "wednesday_minute_6": "Wednesday Minute 6", + "wednesday_temp_7": "Wednesday Temp 7", + "wednesday_hour_7": "Wednesday Hour 7", + "wednesday_minute_7": "Wednesday Minute 7", + "wednesday_temp_8": "Wednesday Temp 8", + "wednesday_hour_8": "Wednesday Hour 8", + "wednesday_minute_8": "Wednesday Minute 8", + "wednesday_temp_9": "Wednesday Temp 9", + "wednesday_hour_9": "Wednesday Hour 9", + "wednesday_minute_9": "Wednesday Minute 9", + "thursday": "Thursday", + "thursday_temp_1": "Thursday Temp 1", + "thursday_hour_1": "Thursday Hour 1", + "thursday_minute_1": "Thursday Minute 1", + "thursday_temp_2": "Thursday Temp 2", + "thursday_hour_2": "Thursday Hour 2", + "thursday_minute_2": "Thursday Minute 2", + "thursday_temp_3": "Thursday Temp 3", + "thursday_hour_3": "Thursday Hour 3", + "thursday_minute_3": "Thursday Minute 3", + "thursday_temp_4": "Thursday Temp 4", + "thursday_hour_4": "Thursday Hour 4", + "thursday_minute_4": "Thursday Minute 4", + "thursday_temp_5": "Thursday Temp 5", + "thursday_hour_5": "Thursday Hour 5", + "thursday_minute_5": "Thursday Minute 5", + "thursday_temp_6": "Thursday Temp 6", + "thursday_hour_6": "Thursday Hour 6", + "thursday_minute_6": "Thursday Minute 6", + "thursday_temp_7": "Thursday Temp 7", + "thursday_hour_7": "Thursday Hour 7", + "thursday_minute_7": "Thursday Minute 7", + "thursday_temp_8": "Thursday Temp 8", + "thursday_hour_8": "Thursday Hour 8", + "thursday_minute_8": "Thursday Minute 8", + "thursday_temp_9": "Thursday Temp 9", + "thursday_hour_9": "Thursday Hour 9", + "thursday_minute_9": "Thursday Minute 9", + "friday": "Friday", + "friday_temp_1": "Friday Temp 1", + "friday_hour_1": "Friday Hour 1", + "friday_minute_1": "Friday Minute 1", + "friday_temp_2": "Friday Temp 2", + "friday_hour_2": "Friday Hour 2", + "friday_minute_2": "Friday Minute 2", + "friday_temp_3": "Friday Temp 3", + "friday_hour_3": "Friday Hour 3", + "friday_minute_3": "Friday Minute 3", + "friday_temp_4": "Friday Temp 4", + "friday_hour_4": "Friday Hour 4", + "friday_minute_4": "Friday Minute 4", + "friday_temp_5": "Friday Temp 5", + "friday_hour_5": "Friday Hour 5", + "friday_minute_5": "Friday Minute 5", + "friday_temp_6": "Friday Temp 6", + "friday_hour_6": "Friday Hour 6", + "friday_minute_6": "Friday Minute 6", + "friday_temp_7": "Friday Temp 7", + "friday_hour_7": "Friday Hour 7", + "friday_minute_7": "Friday Minute 7", + "friday_temp_8": "Friday Temp 8", + "friday_hour_8": "Friday Hour 8", + "friday_minute_8": "Friday Minute 8", + "friday_temp_9": "Friday Temp 9", + "friday_hour_9": "Friday Hour 9", + "friday_minute_9": "Friday Minute 9", + "saturday": "Saturday", + "saturday_temp_1": "Saturday Temp 1", + "saturday_hour_1": "Saturday Hour 1", + "saturday_minute_1": "Saturday Minute 1", + "saturday_temp_2": "Saturday Temp 2", + "saturday_hour_2": "Saturday Hour 2", + "saturday_minute_2": "Saturday Minute 2", + "saturday_temp_3": "Saturday Temp 3", + "saturday_hour_3": "Saturday Hour 3", + "saturday_minute_3": "Saturday Minute 3", + "saturday_temp_4": "Saturday Temp 4", + "saturday_hour_4": "Saturday Hour 4", + "saturday_minute_4": "Saturday Minute 4", + "saturday_temp_5": "Saturday Temp 5", + "saturday_hour_5": "Saturday Hour 5", + "saturday_minute_5": "Saturday Minute 5", + "saturday_temp_6": "Saturday Temp 6", + "saturday_hour_6": "Saturday Hour 6", + "saturday_minute_6": "Saturday Minute 6", + "saturday_temp_7": "Saturday Temp 7", + "saturday_hour_7": "Saturday Hour 7", + "saturday_minute_7": "Saturday Minute 7", + "saturday_temp_8": "Saturday Temp 8", + "saturday_hour_8": "Saturday Hour 8", + "saturday_minute_8": "Saturday Minute 8", + "saturday_temp_9": "Saturday Temp 9", + "saturday_hour_9": "Saturday Hour 9", + "saturday_minute_9": "Saturday Minute 9", + "sunday": "Sunday", + "sunday_temp_1": "Sunday Temp 1", + "sunday_hour_1": "Sunday Hour 1", + "sunday_minute_1": "Sunday Minute 1", + "sunday_temp_2": "Sunday Temp 2", + "sunday_hour_2": "Sunday Hour 2", + "sunday_minute_2": "Sunday Minute 2", + "sunday_temp_3": "Sunday Temp 3", + "sunday_hour_3": "Sunday Hour 3", + "sunday_minute_3": "Sunday Minute 3", + "sunday_temp_4": "Sunday Temp 4", + "sunday_hour_4": "Sunday Hour 4", + "sunday_minute_4": "Sunday Minute 4", + "sunday_temp_5": "Sunday Temp 5", + "sunday_hour_5": "Sunday Hour 5", + "sunday_minute_5": "Sunday Minute 5", + "sunday_temp_6": "Sunday Temp 6", + "sunday_hour_6": "Sunday Hour 6", + "sunday_minute_6": "Sunday Minute 6", + "sunday_temp_7": "Sunday Temp 7", + "sunday_hour_7": "Sunday Hour 7", + "sunday_minute_7": "Sunday Minute 7", + "sunday_temp_8": "Sunday Temp 8", + "sunday_hour_8": "Sunday Hour 8", + "sunday_minute_8": "Sunday Minute 8", + "sunday_temp_9": "Sunday Temp 9", + "sunday_hour_9": "Sunday Hour 9", + "sunday_minute_9": "Sunday Minute 9", + "power_alarm_active": "Power Alarm Active", + "power_alarm": "Power Alarm", + "dimmer_enabled": "Dimmer Enabled", + "permanent_led": "Permanent Led", + "led_when_on": "Led When On", + "led_enable": "Led Enable", + "keep_time": "Keep Time", + "illuminance_calibration": "Illuminance Calibration", + "reporting_time": "Reporting Time", + "temperature_calibration": "Temperature Calibration", + "humidity_calibration": "Humidity Calibration", + "pir_enable": "Pir Enable", + "reporting_enable": "Reporting Enable", + "fan_speed": "Fan Speed", + "pm25": "Pm 25", + "air_quality": "Air Quality", + "replace_filter": "Replace Filter", + "requested_brightness_level": "Requested Brightness Level", + "requested_brightness_percent": "Requested Brightness Percent", + "illuminance_above_threshold": "Illuminance Above Threshold", + "temperature_setpoint_hold": "Temperature Setpoint Hold", + "temperature_setpoint_hold_duration": "Temperature Setpoint Hold Duration", + "hcho": "Hcho", + "aqi": "Aqi", + "pm10": "Pm 10", + "battery_state": "Battery State", + "threshold": "Threshold", + "sos": "Sos", + "trv_mode": "Trv Mode", + "valve_position": "Valve Position", + "display_text": "Display Text", + "load": "Load", + "regulator_mode": "Regulator Mode", + "regulator_time": "Regulator Time", + "floor_temp": "Floor Temp", + "max_floor_temp": "Max Floor Temp", + "mean_power": "Mean Power", + "frost_guard": "Frost Guard", + "night_switching": "Night Switching", + "sound": "Sound", + "time_ring": "Time Ring", + "time_talk": "Time Talk", + "time_open": "Time Open", + "time_bell": "Time Bell", + "time_report": "Time Report", + "led_feedback": "Led Feedback", + "enable_abc": "Enable Abc", + "threshold1": "Threshold 1", + "threshold2": "Threshold 2", + "temperature_offset": "Temperature Offset", + "humidity_offset": "Humidity Offset", + "pressure_offset": "Pressure Offset", + "radioactive_events_per_minute": "Radioactive Events Per Minute", + "radiation_dose_per_hour": "Radiation Dose Per Hour", + "buzzer_feedback": "Buzzer Feedback", + "alert_threshold": "Alert Threshold", + "sensors_type": "Sensors Type", + "sensors_count": "Sensors Count", + "switch_actions": "Switch Actions", + "cpu_temperature": "Cpu Temperature", + "squawk": "Squawk", + "max_duration": "Max Duration", + "pulse_configuration": "Pulse Configuration", + "interface_mode": "Interface Mode", + "current_summation": "Current Summation", + "check_meter": "Check Meter", + "reliability": "Reliability", + "fault": "Fault", + "current_phase_b": "Current Phase B", + "voltage_phase_b": "Voltage Phase B", + "current_phase_c": "Current Phase C", + "voltage_phase_c": "Voltage Phase C", + "master_pin_mode": "Master Pin Mode", + "rfid_enable": "Rfid Enable", + "relock_enabled": "Relock Enabled", + "lock_mode": "Lock Mode", + "service_mode": "Service Mode", + "led_state": "Led State", + "key_state": "Key State", + "abs_min_heat_setpoint_limit": "Abs Min Heat Setpoint Limit", + "abs_max_heat_setpoint_limit": "Abs Max Heat Setpoint Limit", + "min_heat_setpoint_limit": "Min Heat Setpoint Limit", + "max_heat_setpoint_limit": "Max Heat Setpoint Limit", + "output_status": "Output Status", + "room_status_code": "Room Status Code", + "system_status_code": "System Status Code", + "system_status_water": "System Status Water", + "multimaster_role": "Multimaster Role", + "l1": "L 1", + "l2": "L 2", + "l3": "L 3", + "l4": "L 4", + "l5": "L 5", + "l6": "L 6", + "l7": "L 7", + "l8": "L 8", + "l9": "L 9", + "l10": "L 10", + "l11": "L 11", + "l12": "L 12", + "l13": "L 13", + "l14": "L 14", + "l15": "L 15", + "l16": "L 16", + "led": "Led", + "sensivity": "Sensivity", + "consumer_overload": "Consumer overload" }, "groups": { "add_to_group": "新增到群組", @@ -123,7 +1097,11 @@ "new_group_id_placeholder": "群組ID(選填)", "new_group_name": "新群組名稱", "new_group_name_placeholder": "例：我的臥室燈", - "remove_group": "移除群組" + "remove_group": "移除群組", + "group_id": "Group ID", + "group_name": "Group Name", + "group_members": "Group members", + "group_scenes": "Group scenes" }, "logs": { "empty_logs_message": "無日誌", @@ -150,10 +1128,12 @@ "groups": "群組", "logs": "日誌", "map": "網路圖", + "ota": "OTA", "permit_join": "允許裝置加入", "restart": "重啟", "settings": "設定", - "toggle_dropdown": "切換下拉選單" + "toggle_dropdown": "切換下拉選單", + "touchlink": "Touchlink" }, "ota": { "check": "檢查更新", @@ -165,16 +1145,22 @@ "settings": { "about": "關於", "advanced": "進階", + "availability": "Availability", "blocklist": "封鎖裝置列表", "coordinator_revision": "協調器版本", "coordinator_type": "協調器類型", "donate": "贊助", + "donation_text": [ + "Hello, %username%, here you can thank us for hardworking", + "Don't hesitate to say something nice as well ;)" + ], "download_state": "下載狀態", "experimental": "實驗性功能", "external_converters": "外部轉換器", "frontend": "前端", "frontend_version": "前端版本", "main": "基礎", + "mqtt": "MQTT", "ota": "OTA 更新", "passlist": "允許裝置列表", "raw": "RAW", @@ -183,7 +1169,8 @@ "settings": "設定", "tools": "工具", "zigbee2mqtt_version": "Zigbee2MQTT 版本", - "translate": "翻譯" + "translate": "翻譯", + "stats": "Stats" }, "touchlink": { "detected_devices_message": "檢測到{{count}}個touchlink裝置", @@ -200,13 +1187,21 @@ "supported": "支援", "true": "是", "empty_string": "空字串(\"\")", - "leaking": "洩漏" + "leaking": "洩漏", + "tampered": "Tampered", + "null": "Null", + "Clear": "Clear", + "Closed": "Closed", + "Occupied": "Occupied", + "Open": "Open" }, "zigbee": { "actions": "動作", "attribute": "屬性", + "battery": "Battery", "block_join": "防止再次加入", "cluster": "叢集", + "dc_source": "DC Source", "description": "描述", "device_type": "裝置類型", "endpoint": "端點", @@ -217,8 +1212,11 @@ "ieee_address": "IEEE 地址", "input_clusters": "輸入叢集", "interview_completed": "配對成功", + "interview_failed": "Interview failed", + "interviewing": "Interviewing", "last_seen": "最後出現", "lqi": "連線品質(LQI)", + "mains_single_phase": "Mains (single phase)", "manufacturer": "製造商", "max_rep_interval": "最大回報間隔", "min_rep_change": "修改最小回報間隔", @@ -229,6 +1227,7 @@ "output_clusters": "輸出叢集", "pic": "圖片", "power": "電源類型", + "power_level": "power level", "reconfigure": "重新設置裝置", "remove_device": "移除裝置", "rename_device": "重新命名裝置", @@ -236,15 +1235,214 @@ "select_cluster": "選擇叢集", "support_status": "受支援狀態", "unsupported": "不支援", + "updating_firmware": "Updating firmware", "update_Home_assistant_entity_id": "更新 Home Assistant 實體 ID", "zigbee_manufacturer": "Zigbee 製造商", "zigbee_model": "Zigbee 型號", - "device": "裝置" + "device": "裝置", + "channel": "Channel", + "possible": "Possible", + "available": "Available" }, "scene": { "scene_id": "場景ID", + "recall": "Recall", "store": "儲存", "remove": "移除", - "remove_all": "移除全部" + "remove_all": "移除全部", + "add": "Add", + "select_scene": "Select Scene", + "scene_name": "Scene Name" + }, + "stats": { + "byType": "By device type", + "byPowerSource": "By power source", + "byVendor": "By vendor", + "byModel": "By model", + "total": "Total", + "EndDevice": "End devices", + "Router": "Router" + }, + "avaliability": { + "avaliability": "Availability", + "offline": "Offline", + "online": "Online", + "disabled": "Disabled", + "enabled": "Enabled" + }, + "settingsSchemaDescriptions": { + "Home Assistant integration (MQTT discovery)": "Home Assistant integration (MQTT discovery)", + "Allow new devices to join (re-applied at restart)": "Allow new devices to join (re-applied at restart)", + "You can define external converters to e.g. add support for a DiY device": "You can define external converters to e.g. add support for a DiY device", + "Options for active devices (routers/mains powered)": "Options for active devices (routers/mains powered)", + "Time after which an active device will be marked as offline in minutes": "Time after which an active device will be marked as offline in minutes", + "Options for passive devices (mostly battery powered)": "Options for passive devices (mostly battery powered)", + "Time after which an passive device will be marked as offline in minutes": "Time after which an passive device will be marked as offline in minutes", + "Checks whether devices are online/offline": "Checks whether devices are online/offline", + "MQTT base topic for Zigbee2MQTT MQTT messages": "MQTT base topic for Zigbee2MQTT MQTT messages", + "MQTT server URL (use mqtts:// for SSL/TLS connection)": "MQTT server URL (use mqtts:// for SSL/TLS connection)", + "MQTT keepalive in second": "MQTT keepalive in second", + "Absolute path to SSL/TLS certificate of CA used to sign server and client certificates": "Absolute path to SSL/TLS certificate of CA used to sign server and client certificates", + "Absolute path to SSL/TLS key for client-authentication": "Absolute path to SSL/TLS key for client-authentication", + "Absolute path to SSL/TLS certificate for client-authentication": "Absolute path to SSL/TLS certificate for client-authentication", + "MQTT server authentication user": "MQTT server authentication user", + "MQTT server authentication password": "MQTT server authentication password", + "MQTT client ID": "MQTT client ID", + "Disable self-signed SSL certificate": "Disable self-signed SSL certificate", + "Include device information to mqtt messages": "Include device information to mqtt messages", + "MQTT protocol version": "MQTT protocol version", + "Disable retain for all send messages. ONLY enable if you MQTT broker doesn't support retained message (e.g. AWS IoT core, Azure IoT Hub, Google Cloud IoT core, IBM Watson IoT Platform). Enabling will break the Home Assistant integration": "Disable retain for all send messages. ONLY enable if you MQTT broker doesn't support retained message (e.g. AWS IoT core, Azure IoT Hub, Google Cloud IoT core, IBM Watson IoT Platform). Enabling will break the Home Assistant integration", + "Location of the adapter. To autodetect the port, set null": "Location of the adapter. To autodetect the port, set null", + "Disable LED of the adapter if supported": "Disable LED of the adapter if supported", + "Adapter type, not needed unless you are experiencing problems": "Adapter type, not needed unless you are experiencing problems", + "Block devices from the network (by ieeeAddr)": "Block devices from the network (by ieeeAddr)", + "Allow only certain devices to join the network (by ieeeAddr). Note that all devices not on the passlist will be removed from the network!": "Allow only certain devices to join the network (by ieeeAddr). Note that all devices not on the passlist will be removed from the network!", + "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)": "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)", + "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)": "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)", + "Disables the legacy api (false = disable)": "Disables the legacy api (false = disable)", + "ZigBee pan ID, changing requires repairing all devices!": "ZigBee pan ID, changing requires repairing all devices!", + "Zigbee extended pan ID, changing requires repairing all devices!": "Zigbee extended pan ID, changing requires repairing all devices!", + "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)": "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)", + "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant": "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant", + "Persist cached state, only used when cache_state: true": "Persist cached state, only used when cache_state: true", + "Send cached state on startup, only used when cache_state: true": "Send cached state on startup, only used when cache_state: true", + "Log rotation": "Log rotation", + "Create symlink to current logs in the log directory": "Create symlink to current logs in the log directory", + "Logging level": "Logging level", + "Output location of the log, leave empty to supress logging": "Output location of the log, leave empty to supress logging", + "Location of log directory": "Location of log directory", + "Log file name, can also contain timestamp": "Log file name, can also contain timestamp", + "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600": "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600", + "RTS / CTS Hardware Flow Control for serial port": "RTS / CTS Hardware Flow Control for serial port", + "Soft reset ZNP after timeout": "Soft reset ZNP after timeout", + "Network encryption key, changing requires repairing all devices!": "Network encryption key, changing requires repairing all devices!", + "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message": "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message", + "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg": "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg", + "Enables report feature (deprecated)": "Enables report feature (deprecated)", + "Home Assistant discovery topic": "Home Assistant discovery topic", + "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates": "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates", + "Home Assistant status topic": "Home Assistant status topic", + "Log timestamp format": "Log timestamp format", + "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)": "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)", + "Adapter delay": "Adapter delay", + "Use IKEA TRADFRI OTA test server, see OTA updates documentation": "Use IKEA TRADFRI OTA test server, see OTA updates documentation", + "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd": "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd", + "The host running syslogd, defaults to localhost.": "The host running syslogd, defaults to localhost.", + "The port on the host that syslog is running on, defaults to syslogd's default port.": "The port on the host that syslog is running on, defaults to syslogd's default port.", + "The network protocol to log over (e.g. tcp4, udp4, tls4, unix, unix-connect, etc).": "The network protocol to log over (e.g. tcp4, udp4, tls4, unix, unix-connect, etc).", + "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).": "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).", + "PID of the process that log messages are coming from (Default process.pid).": "PID of the process that log messages are coming from (Default process.pid).", + "Host to indicate that log messages are coming from (Default: localhost).": "Host to indicate that log messages are coming from (Default: localhost).", + "The type of the syslog protocol to use (Default: BSD, also valid: 5424).": "The type of the syslog protocol to use (Default: BSD, also valid: 5424).", + "The name of the application (Default: Zigbee2MQTT).": "The name of the application (Default: Zigbee2MQTT).", + "The end of line character to be added to the end of the message (Default: Message without modifications).": "The end of line character to be added to the end of the message (Default: Message without modifications).", + "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.": "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.", + "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.": "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.", + "Frontend binding port": "Frontend binding port", + "Frontend binding host": "Frontend binding host", + "Enables authentication, disabled by default": "Enables authentication, disabled by default", + "Used in the MQTT topic of a device. By default this is the device ID": "Used in the MQTT topic of a device. By default this is the device ID", + "Retain MQTT messages of this device": "Retain MQTT messages of this device", + "Sets the MQTT Message Expiry in seconds, Make sure to set mqtt.version to 5": "Sets the MQTT Message Expiry in seconds, Make sure to set mqtt.version to 5", + "QoS level for MQTT messages of this device": "QoS level for MQTT messages of this device", + "Debounces messages of this device": "Debounces messages of this device", + "Protects unique payload values of specified payload properties from overriding within debounce time": "Protects unique payload values of specified payload properties from overriding within debounce time", + "Publish optimistic state after set": "Publish optimistic state after set", + "Filter attributes from optimistic publish payload when calling /set. (This has no effect if optimistic is set to false).": "Filter attributes from optimistic publish payload when calling /set. (This has no effect if optimistic is set to false).", + "Filter attributes from publish payload.": "Filter attributes from publish payload.", + "The user-defined device icon for the frontend. It can be a link to an image (not a path to a file) or base64 encoded data URL like: image/svg+xml;base64,PHN2ZyB3aW....R0aD": "The user-defined device icon for the frontend. It can be a link to an image (not a path to a file) or base64 encoded data URL like: image/svg+xml;base64,PHN2ZyB3aW....R0aD" + }, + "settingsSchemaTitles": { + "Home Assistant integration": "Home Assistant integration", + "Permit join": "Permit join", + "External converters": "External converters", + "Availability (boolean)": "Availability (boolean)", + "Availability (object)": "Availability (object)", + "Active": "Active", + "Timeout": "Timeout", + "Availability": "Availability", + "MQTT": "MQTT", + "Base topic": "Base topic", + "MQTT server": "MQTT server", + "Keepalive": "Keepalive", + "Certificate authority": "Certificate authority", + "SSL/TLS key": "SSL/TLS key", + "SSL/TLS certificate": "SSL/TLS certificate", + "User": "User", + "Password": "Password", + "Client ID": "Client ID", + "Reject unauthorized": "Reject unauthorized", + "Include device information": "Include device information", + "Version": "Version", + "Force disable retain": "Force disable retain", + "Serial": "Serial", + "Port": "Port", + "Disable led": "Disable led", + "Adapter": "Adapter", + "Blocklist": "Blocklist", + "Passlist": "Passlist", + "Whitelist (deprecated, use passlist)": "Whitelist (deprecated, use passlist)", + "Ban (deprecated, use blocklist)": "Ban (deprecated, use blocklist)", + "Experimental": "Experimental", + "Transmit power": "Transmit power", + "MQTT output type": "MQTT output type", + "Advanced": "Advanced", + "Legacy API": "Legacy API", + "Pan ID (string)": "Pan ID (string)", + "Pan ID (number)": "Pan ID (number)", + "Pan ID": "Pan ID", + "Ext Pan ID": "Ext Pan ID", + "ZigBee channel": "ZigBee channel", + "Cache state": "Cache state", + "Persist cache state": "Persist cache state", + "Send cached state on startup": "Send cached state on startup", + "Log rotation": "Log rotation", + "Log symlink current": "Log symlink current", + "Log level": "Log level", + "Log output": "Log output", + "Log directory": "Log directory", + "Log file": "Log file", + "Baudrate": "Baudrate", + "RTS / CTS": "RTS / CTS", + "Soft reset timeout (deprecated)": "Soft reset timeout (deprecated)", + "Network key(string)": "Network key(string)", + "Network key(array)": "Network key(array)", + "Network key": "Network key", + "Last seen": "Last seen", + "Elapsed": "Elapsed", + "Reporting": "Reporting", + "Homeassistant discovery topic": "Homeassistant discovery topic", + "Home Assistant legacy entity attributes": "Home Assistant legacy entity attributes", + "Home Assistant status topic": "Home Assistant status topic", + "Timestamp format": "Timestamp format", + "Adapter concurrency": "Adapter concurrency", + "Adapter delay": "Adapter delay", + "IKEA TRADFRI OTA use test url": "IKEA TRADFRI OTA use test url", + "Home Assistant legacy triggers": "Home Assistant legacy triggers", + "syslog": "syslog", + "Host": "Host", + "Protocol": "Protocol", + "Path": "Path", + "PID": "PID", + "Localhost": "Localhost", + "Type": "Type", + "eol": "eol", + "Networkmap": "Networkmap", + "OTA updates": "OTA updates", + "Update check interval": "Update check interval", + "Disable automatic update check": "Disable automatic update check", + "Frontend": "Frontend", + "Bind host": "Bind host", + "Auth token": "Auth token", + "Friendly name": "Friendly name", + "Retain": "Retain", + "Retention": "Retention", + "QoS": "QoS", + "Debounce": "Debounce", + "Ignore debounce": "Ignore debounce", + "Optimistic": "Optimistic", + "Filtered optimistic attributes": "Filtered optimistic attributes", + "Filtered publish attributes": "Filtered publish attributes", + "Icon": "Icon" } } \ No newline at end of file