Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Seika Braille Display can't be loaded in NVDA 2019.3 #10787

Closed
moyanming opened this issue Feb 15, 2020 · 7 comments
Closed

Seika Braille Display can't be loaded in NVDA 2019.3 #10787

moyanming opened this issue Feb 15, 2020 · 7 comments
Milestone

Comments

@moyanming
Copy link
Contributor

Source code is the seika.py.

Steps to reproduce:

  1. CP2102 installed successfully and the serial COM port of the Seika braille display can be found.
  2. Manually select the "Seika Braille Displays", but only got "Could not load the seika display.".

Actual behavior:

The Seika Braille display can't be used in the NVDA 2019.3 and NVDA 2019.3.1.

Expected behavior:

System configuration

NVDA installed/portable/running from source:

NVDA version:

NVDA 2019.3 AND NVDA 2019.3.1

Windows version:

Windwos 10 1903 64bit.
Windows 10 1909 64bit.

Name and version of other software in use when reproducing the issue:

Other information about your system:

Other questions

Does the issue still occur after restarting your PC?

Yes.

Have you tried any other versions of NVDA? If so, please report their behaviors.

The Seika Braille display works fine in the NVDA 2019.2 and older version.

@josephsl
Copy link
Collaborator

josephsl commented Feb 15, 2020 via email

@moyanming
Copy link
Contributor Author

Hi @josephsl ,
Thanks for the reply.
We will try to look into and improve the seika.py, and test manually.
We have contacted the author @Ulf-Beckmann too.
BTW, we are the manufacturer of the Seika Braille Display.

@moyanming
Copy link
Contributor Author

Hi @josephsl ,
We have updated the "seika.py" and well test it. The Seika Braille displays are work fine with the NVDA 2019.3.
We rename the name of the driver to the "Seika Braille V3/5/80" from "Seika Braille displays". Please find the addon here
Seika v3v5v80 addon for NADA v1.0.zip
.
Is there a need for the PR for this issue?

@josephsl
Copy link
Collaborator

josephsl commented Feb 17, 2020 via email

@MichelSuch
Copy link
Contributor

MichelSuch commented Jun 4, 2021 via email

@seanbudd seanbudd reopened this Jun 4, 2021
@moyanming
Copy link
Contributor Author

Hi, Note that the "Seika Braille Display" that used to support the old Seika 2 is still broken. The display is partially recognized when using automatic detection, braille text is displayed but no command keys (routing etc) works. Michel Such @.***> ------------------------------------------------------------------------ Expert NVDA certifié 2019 Le 04/06/2021 à 08:08, Reef Turner a écrit :

Closed #10787 <#10787> via ed0f900 <ed0f900>. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#10787 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADYUFD22DBCNZH7TCC4EUDDTRBUXVANCNFSM4KVU5LSQ.

Hi, @MichelSuch
The PR #10961 supports Seika v3/5/80 devices.
The Seika 2 which is in your hand should manually select the "Seika v3/5/80" item in the NVDA, please have a try.

@seanbudd
Copy link
Member

Closing as this seems resolved

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

5 participants