A Powerful Diagnostic Tool for Texas Instruments OMAP Processors
OMAPCONF is a Linux user-space standalone application designed to provide a quick'n easy way to diagnose (monitor/debug/audit...) TI OMAP configuration/status dynamically at runtime, in any situation:
- Any Linux distribution (Ubuntu, ...)
- Any Android release (Froyo, GingerBread, HoneyComb, Ice-Cream Sandwich, Jelly Bean, ...)
- TI official platforms (blaze, panda, ...),
- Custom OMAP platforms, etc.
- With no single kernel recompilation needed
OMAPCONF leverages "/dev/mem" special device to directly access complete TI OMAP memory space (registers, ...).
OMAPCONF CURRENTLY SUPPORTS TI OMAP44XX AND OMAP54XX DEVICES. LEGACY TI OMAP PLATFORMS (OMAP[1-2-3]) ARE NOT SUPPORTED.
THIS SOFTWARE IS PROVIDED AS IS, WITH NO SUPPORT OR MAINTENANCE COMMITMENT FROM TEXAS INSTRUMENTS INCORPORATED.
Build instructions (Ubuntu):
OMAPCONF is available as a Ubuntu package. To proceed with package installation type the following:
# sudo apt-get install tiomapconf
Once package is installed, you can check which omapconf version you are using:
# dpkg -l tiomapconf
Package is available via TI OMAP4 Ubuntu PPA. See the OMAPpedia page for further instructions.
Build instructions (other Linux Distributions):
To only build the output binary file: # make CROSS_COMPILE=arm-none-linux-gnueabi- omapconf
NB: CROSS_COMPILE variable must be set to point to the correct compiler.
To build and install ompaconf:
# make CROSS_COMPILE=arm-none-linux-gnueabi- DESTDIR=YOUR_DIR install
YOUR_DIR is a destination directory where omapconf output binary file will be copied (e.g. ubuntu/android filesystem)
Build instructions and installation via ADB (Android):
Make sure your Android device is connected to host via ADB:
# adb kill-server # adb devices * daemon not running. starting it now * * daemon started successfully * List of devices attached emulator-5554 device # adb root
To build and install ompaconf for Android via ADB:
# make CROSS_COMPILE=arm-none-linux-gnueabi- install_android
OMAPCONF binary will be copied to /data directory (known writable directory) on your Android device. You may get it copied to a different directory by updating Makefile at your convenience.
Type "./omapconf --help" to get complete list of available commands and options. Note that in case of incorrect command/option, help will also be displayed.
A dedicated wiki page is available here.