diff --git a/src/import/chips/p9/procedures/xml/error_info/p9_sbe_check_quiesce_errors.xml b/src/import/chips/p9/procedures/xml/error_info/p9_sbe_check_quiesce_errors.xml
index 9efd215bb13..4f8228b1626 100644
--- a/src/import/chips/p9/procedures/xml/error_info/p9_sbe_check_quiesce_errors.xml
+++ b/src/import/chips/p9/procedures/xml/error_info/p9_sbe_check_quiesce_errors.xml
@@ -5,7 +5,7 @@
 <!--                                                                        -->
 <!-- OpenPOWER HostBoot Project                                             -->
 <!--                                                                        -->
-<!-- Contributors Listed Below - COPYRIGHT 2016,2018                        -->
+<!-- Contributors Listed Below - COPYRIGHT 2016,2020                        -->
 <!-- [+] International Business Machines Corp.                              -->
 <!--                                                                        -->
 <!--                                                                        -->
@@ -35,7 +35,7 @@
     <rc>RC_P9_CAPP_QUIESCE_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      CAPP quiesce done bit is not set  
+      CAPP quiesce done bit is not set
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -46,19 +46,31 @@
     <rc>RC_P9_NTL_NOT_IN_RESET</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      The NTLs are not all in the reset state for the NPU   
+      The NTLs are not all in the reset state for the NPU
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>NTL_ADDR</ffdc>
     <ffdc>NTL_DATA</ffdc>
   </hwpError>
   <!-- ******************************************************************** -->
+  <hwpError>
+    <sbeError/>
+    <rc>RC_P9_OTL_NOT_IN_RESET</rc>
+    <description>
+      Procedure: p9_sbe_check_quiesce
+      The OTLs are not all in the reset state for this stack
+    </description>
+    <ffdc>PROC_TARGET</ffdc>
+    <ffdc>STATUS_ADDR</ffdc>
+    <ffdc>STATUS_DATA</ffdc>
+  </hwpError>
+  <!-- ******************************************************************** -->
   <hwpError>
     <sbeError/>
     <rc>RC_P9_VAS_QUIESCE_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      The VAS quiesce was not achieved 
+      The VAS quiesce was not achieved
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>NORTHDATA</ffdc>
@@ -70,7 +82,7 @@
     <rc>RC_P9_NX_PBI_WRITE_IDLE_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      The PBI Write Idle never happened 
+      The PBI Write Idle never happened
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -81,7 +93,7 @@
     <rc>RC_P9_NX_CRB_KILL_DONE_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      CRB kills were not complete 
+      CRB kills were not complete
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -114,7 +126,7 @@
     <rc>RC_P9_WAIT_FOR_DMA_CHANNELS_TO_DRAIN_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      DMA channels were not drained 
+      DMA channels were not drained
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -125,7 +137,7 @@
     <rc>RC_P9_WAIT_FOR_ERAT_IDLE</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      ERAT was not idle 
+      ERAT was not idle
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -147,7 +159,7 @@
     <rc>RC_P9_UMAC_QUIESCE_FAILED</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      UMAC status control quiesce failed 
+      UMAC status control quiesce failed
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -158,7 +170,7 @@
     <rc>RC_P9_PSIHBCR_INBOUND_QUEUE_NOT_EMPTY</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      PSIHBCR inbound queue not empty 
+      PSIHBCR inbound queue not empty
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>
@@ -169,7 +181,7 @@
     <rc>RC_P9_INTP_QUIESCE_TIMEOUT</rc>
     <description>
       Procedure: p9_sbe_check_quiesce
-      INTP master or slave is not idle 
+      INTP master or slave is not idle
     </description>
     <ffdc>TARGET</ffdc>
     <ffdc>DATA</ffdc>