Config Builder (Conf) is the tab where you turn the modular features on and off. The boxes on the left hand side (A) allow you to select which one to use, the boxes on the right hand side (C) allow you to view these as a tab (E) in AndroidAPS. In case the right box is not activated you can reach the function by using the hamburger menu (D) on the top left of the screen.
Where there are additional settings available within the module, you can click on the cog wheel (B) which will take you to the specific settings within preferences.
First configuration: Since AAPS 2.0 a Setup wizard guides you through the process of setting up AndroidAPS. Push 3-dots-menu on the upper right hand side of the screen (F) and select 'Setup Wizard' to use it.
Select the basal profile you wish to use. See Profiles page for more setup information.
NS Profile uses the profiles you have saved on your nightscout site (https://[yournightscoutsiteaddress]/profile). You can use the Profile Switch to change which of those profiles is active, this writes the profile to the pump in case of AndroidAPS failure. This allows you to easily create multiple profiles in Nightscout (i.e.. work, home, sports, holidays, etc.). Shortly after clicking on "Save" they will be transferred to AAPS if your smartphone is online. Even without an Internet connection or without a connection to Nightscout, the Nightscout profiles are available in AAPS once they have been synchronized.
Do a profile switch to activate a profile from Nightscout. Press and hold the current profile in the AAPS homescreen at the top (grey field between the light blue "Open/Closed Loop" field and the dark blue target area field) > Profile switch > Select profile > OK. AAPS also writes the selected profile into the pump after the profile change, so that it is available without AAPS in an emergency and continues to run.
Simple profile with just one time block for DIA, IC, ISF, basal rate and target range (i.e. no basal rate changes during the day). More likely to be used for testing purposes unless you have the same factors over 24 hours. Once "Simple Profile" is selected, a new tab will appear in AAPS where you can enter the profile data.
Local profile (recommended)
Local profile uses the basal profile manually entered in phone. As soon as it is selected, a new tab appears in AAPS, where you can change the profile data read out from the pump if necessary. With the next profile switch they are then written to the pump in profile 1. This profile is recommended as it does not rely on internet connectivity.
Select the type of insulin curve you are using. Basic AndroidAPS options are bilinear 'Fast Acting Insulin' for an insulin with DIA of less than 5 hours, or 'Fast Acting Insulin Prolonged' for an insulin with DIA of greater than 5 hours. These curves will only vary based on the duration of the DIA. The Oref options 'Rapid-Acting Oref', Ultra-Rapid Oref' and 'Free-Peak Oref' are exponential and more information is listed in the OpenAPS docs, the curves will vary based on the DIA and the time to peak. You will need to enter additional settings for these. You can view the insulin curve graph on the Insulin (Ins) tab to help you understand which curve fits you.
- recommended for Humalog, Novolog and Novorapid
- DIA = at least 5.0h
- Max. peak = 75 minutes after injection
- recommended for FIASP
- DIA = at least 5.0h
- Max. peak = 55 minutes after injection
For a lot of people there is practically no noticeable effect of FIASP after 3-4 hours any more, even if 0.0xx units are available as a rule then. This residual amount can still be noticeable during sports, for example. Therefore AndroidAPS uses minimum 5h as DIA.
Free Peak Oref
With the "Free Peak 0ref" profile you can individually enter the peak time. The DIA is automatically set to 5 hours if it is not specified higher in the profile.
This effect profile is recommended if an unbacked insulin or a mixture of different insulins is used.
Select the blood glucose source you are using - see BG Source page for more setup information.
- NSClient BG
- Dexcom G5 app (patched) - Select 'Send BG data to xDrip+' if you want tu use xDrip+ alarms.
Select the pump you are using.
- DanaR Korean (for domestic DanaR pump)
- DanaRv2 (DanaR pump with firmware upgrade)
- Accu Chek Combo Pump (requires ruffy installation)
- MDI (receive AAPS suggestions for your multiple daily injections thereapy)
- Virtual pump (open loop for pump which don't have any driver yet - AAPS suggestions only)
Use Advanced settings to activate BT watchdog if necessary. It switches off bluetooth for one second if no connection to the pump is pobbile. This may help on some phones where the bluetooth stack freezes.
Select the type of sensitivity detection. This will analyse historical data on the go and make adjustments if it recognizes that you are reacting more sensitively (or conversely, more resistant) to insulin than usual. Details about the Sensitivity Oref0 algorithm can be read in the OpenAPS docs.
You can view your sensistivity on the homescreen by selecting SEN and watching the white line. Note, you need to be in Objective 6 in order to use Sensitivity Detection/autosens.
If you use Oref1 with SMB you must change min_5m_carbimpact to 8. The value is only used during gaps in CGM readings or when physical activity "uses up" all the blood glucose rise that would otherwise cause AAPS to decay COB. At times when carb absorption can't be dynamically worked out based on your bloods reactions it inserts a default decay to your carbs. Basically it is a failsafe.
Select the desired APS algorithm for therapy adjustments. You can view the active detail of the chosen algorithm in the OpenAPS(OAPS) tab.
- OpenAPS MA (meal assist, state of the algorithm in 2016)
- OpenAPS AMA (advanced meal assist, state of the algorithm in 2016)
More detail about OpenAPS AMA can be found in the OpenAPS docs. In simple terms the benefits are after you give yourself a meal bolus the system can high-temp more quickly IF you enter carbs reliably.
Note you need to be in Objective 7 in order to use OpenAPS AMA.
- OpenAPS SMB (super micro bolus, most recent algorithm for advanced users)
Note you need to be in Objective 8 in order to use OpenAPS SMB and min_5m_carbimpact must be set to 8 in Config builder > Sensitivity detection > Sensitivity Oref1 settings.
Define whether you want to allow AAPS automatic controls or not.
AAPS continuously evaluates all available data (IOB, COB, BG...) and makes treatment suggestions on how to adjust your therapy if necessary. The suggestions will not be executed automatically (as in closed loop) have to be entered manually into the pump or by using a button in case you are using a compatible pump (Dana R/RS or Accu Chek Combo). This option is for getting to know how AndroidAPS works or if you are using an unsupported pump.
AAPS continuously evaluates all available data (IOB, COB, BG...) and automatically adjusts the treatment if necessary (i.e. without further intervention by you) to reach the set target range or value (bolus delivery, temporary basal rate, insulin switch-off to avoid hypoversion, etc.). The Closed Loop works within numerous safety limits, which you can be set individually. Closed Loop is only possible if you are in Objective 4 or higher and use a supported pump.
Objectives (learning program)
AndroidAPS has a number of objectives that you have to fulfill step by step. This should guide you safely through setting up a closed loop system. It guarantees that you have set everything up correctly and understand what the system does exactly. This is the only way you can trust the system.
You should export your settings (including progress of the objectives) on a regulary basis. In case you have to replace your smartphone later (new purchase, display damage etc.) you can simply import those settings.
See Objectives page for more information.
If you view the Treatments (Treat) tab, you can see the treatments that have been uploaded to nightscout. Should you wish to edit or delete an entry (e.g. you ate less carbs than you expected) then select 'Remove' and enter the new value (change the time if necessary) through the Careportal (CP) tab.
Displays the current state of your loop and buttons for most common actions (see section The Homescreen for details). Settings can be accessed by clicking the cog wheel.
Keep screen on
Option 'Keep screen on' will force Android to keep the screen on at all times. This is useful for presentations etc. But it consumes a lot of battery power. Therefore it is recommended to connect the smartphone to a charger cable.
Define which Buttons are shown on the home screen.
- CGM (opens xDrip+)
Furthermore you can set shortcuts for insulin and carb increments and decide wether the notes field should be shown in treatment dialogues.
Create a button for a certain standard meal (carbs and calculation method for the bolus) which will be displayed on the home screen. Use for standard meals frequently eaten. If different times are specified for the different meals you will always have the appropriate standard meal button on the home screen, depending on the time of day.
Note: Button will not be visible if outside the specified time range or if you have enough IOB to cover the carbs defined in the QuickWizard button.
Enable super bolus functionality in wizard. Use with caution and do not enable until you learn what it really does. Basically the basal for the next two hours is added to the bolus and a two hour zero-temp activated. Details on super bolus can be found here.
Some buttons to quickly access common features:
- Profiles Switch (see Profiles page for more setup information)
- Temporary targets
- Set / cancel temp. basal rate
- Extended bolus (DanaR/RS or Combo pump only)
- Prime / fill (DanaR/RS or Combo pump only)
- History browser
- TDD (Total daily dose = bolus + basal per day)
Some doctors use - especially for new pumpers - a basal-bolus-ratio of 50:50. Therefore ratio is calculated as TDD / 2 * TBB (Total base basal = sum of basal rate within 24 hours). Others prefer range of 32% to 37% of TDD for TBB. Like most of these rules-of-thumb it is of limited real validity. Note: Your diabetes may vary!
Allows you to record any specific care entries and view the current sensor, insulin, canula and pump battery ages in the Careportal (CP) tab.
Note: No insulin will be given if entered via careportal (i.e. meal bolus, correction bolus...)
Carbs entered in the careportal (i.e. correction carbs) will be used for COB calculation.
Allows remote caregivers to control some AndroidAPS features via SMS, see SMS Commands for more setup information.
Displays the food presets defined in the Nightscout food database, see Nightscout Readme for more setup information.
Note: Entries cannot be used in the AndroidAPS calculator. (View only)
Monitor and control AAPS using your Android Wear watch (see page Watchfaces). Use settings (cog wheel) to define which variables should be considered when calculating bolus given though your watch (i.e. 15min trend, COB...).
If you want to bolus etc from the watch then within "Wear settings" you need to enable "Controls from Watch".
Through Wear tab or hamburger menu (top left of screen, if tab is not displayed) you can
- Resend all data. Might be helpful if watch was not connected for some time and you want to push the information to the watch.
- Open settings on your watch directly from your phone.
xDrip Statusline (watch)
Display loop information on your xDrip+ watchface (if you are not using AAPS/AAPSv2 watchface
Displays a summary of current BG, delta, active TBR%, active basal u/hr and profile, IOB and split into bolus IOB and basal IOB on the phones dropdown screen and phonelock screen.
Setup sync of your AndroidAPS data with Nightscout.
If Log app start to NS is activated each AndroidAPS will be visible in Nightscout. Might be useful to detect problems with the app (i.e. battery optimisation not disabled for AAPS) but can flood the Nightscout graph with entries.
Activate/deactivate AndroidAPS alarms
Offline looping, disable roaming...
If you want to use only a specific WiFi network you can enter its WiFi SSID . Several SSIDs can be separated by semicolon. To delete all SSIDs enter a blank space in the field.
- Auto backfill missing BGs from Nightscout
- Create announcement from errors Create Nightscout announcement fro error dialogs and local alerts (also viewable in careportal in treatments section)
- Enable local broadcast to other apps like xDrip+
- NS upload only (sync disabled)
- No upload to NS
- Always use basal absolute values -> Must be activated if you want to use Autotune properly.
Email and number of logs to be send. Normally no change neccessary.
Use tab for config builder instead of hambuger menu.