Skip to content
This repository
branch: master
Fetching contributors…

Octocat-spinner-32-eaf2f5

Cannot retrieve contributors at this time

executable file 173 lines (145 sloc) 5.331 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172
#!/bin/sh

CWD=`pwd`
WORKDIR=sandbox
SRCDIR=${BSDSRCDIR:-/usr/src}
DESTDIR=${DESTDIR:-${CWD}/${WORKDIR}}
KERNELFILE=${KERNELFILE:-${CWD}/obj/bsd.gz}
SUDO=sudo
DEVICE=vnd0
MOUNTPOINT=/mnt
TEMPFILE=/tmp/build-diskimage.tmp.$$

# This is for boot.conf and should match the kernel ttyspeed.
# Which should be 9600 for GENERIC-RD, 38400 for WRAP12 and 19200 for the rest.
TTYSPEED=${TTYSPEED:-19200}

# drive geometry information -- get the right one for your flash!!

# 128 MB cards
totalsize=250880 # "total sectors:"
bytessec=512 # "bytes/sector:"
sectorstrack=32 # "sectors/track:"
sectorscylinder=256 # "sectors/cylinder:"
trackscylinder=8 # "tracks/cylinder:"
cylinders=980 # "cylinders:"

# 256 MB cards
#totalsize=501760 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=32 # "sectors/track:"
#sectorscylinder=512 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=980 # "cylinders:"

# 489 MB cards
#totalsize=1001952 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=63 # "sectors/track:"
#sectorscylinder=1008 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=994 # "cylinders:"

# 1GB cards
#totalsize=2001888 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=63 # "sectors/track:"
#sectorscylinder=1008 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=994 # "cylinders:"

# 2GB cards
#totalsize=4001760 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=63 # "sectors/track:"
#sectorscylinder=1008 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=994 # "cylinders:"

# 4GB cards
#totalsize=8003520 # "total sectors:"
#bytessec=512 # "bytes/sector:"
#sectorstrack=63 # "sectors/track:"
#sectorscylinder=1008 # "sectors/cylinder:"
#trackscylinder=16 # "tracks/cylinder:"
#cylinders=994 # "cylinders:"


# Don't start without a imagefile as a parameter
if [ "$1" = "" ]; then
echo "usage: $0 imagefile"
  exit 1
fi

IMAGEFILE=$1

# Does the kernel exist at all
if [ ! -r $KERNELFILE ]; then
echo "ERROR! $KERNELFILE does not exist or is not readable."
  exit 1
fi

echo "Cleanup if something failed the last time... (ignore any not currently mounted and Device not configured warnings)"
${SUDO} umount $MOUNTPOINT
${SUDO} vnconfig -u $DEVICE

echo ""
echo "Creating an image file, if one doesn't exist..."
if [ ! -f $IMAGEFILE ] ; then
dd if=/dev/zero of=$IMAGEFILE bs=$bytessec count=$totalsize
fi

echo ""
echo "Mounting the imagefile as a device..."
${SUDO} vnconfig -c $DEVICE $IMAGEFILE

echo ""
echo "Running fdisk... (Ignore any sysctl(machdep.bios.diskinfo): Device not configured warnings)"
${SUDO} fdisk -c $cylinders -h $trackscylinder -s $sectorstrack -f ${DESTDIR}/usr/mdec/mbr -e $DEVICE << __EOC >/dev/null
reinit
update
write
quit
__EOC

let asize=$totalsize-$sectorstrack

echo "type: SCSI" >> $TEMPFILE
echo "disk: vnd device" >> $TEMPFILE
echo "label: fictitious" >> $TEMPFILE
echo "flags:" >> $TEMPFILE
echo "bytes/sector: ${bytessec}" >> $TEMPFILE
echo "sectors/track: ${sectorstrack}" >> $TEMPFILE
echo "tracks/cylinder: ${trackscylinder}" >> $TEMPFILE
echo "sectors/cylinder: ${sectorscylinder}" >> $TEMPFILE
echo "cylinders: ${cylinders}" >> $TEMPFILE
echo "total sectors: ${totalsize}" >> $TEMPFILE
echo "rpm: 3600" >> $TEMPFILE
echo "interleave: 1" >> $TEMPFILE
echo "trackskew: 0" >> $TEMPFILE
echo "cylinderskew: 0" >> $TEMPFILE
echo "headswitch: 0 " >> $TEMPFILE
echo "track-to-track seek: 0 " >> $TEMPFILE
echo "drivedata: 0 " >> $TEMPFILE
echo "" >> $TEMPFILE
echo "16 partitions:" >> $TEMPFILE
echo "a: $asize $sectorstrack 4.2BSD 2048 16384 16" >> $TEMPFILE
echo "c: $totalsize 0 unused 0 0" >> $TEMPFILE

echo ""
echo "Installing disklabel..."
${SUDO} disklabel -R $DEVICE $TEMPFILE
rm $TEMPFILE

echo ""
echo "Creating new filesystem..."
${SUDO} newfs -q /dev/r${DEVICE}a

echo ""
echo "Mounting destination to ${MOUNTPOINT}..."
if ! ${SUDO} mount -o async /dev/${DEVICE}a ${MOUNTPOINT}; then
echo Mount failed..
  exit
fi

echo ""
echo "Copying bsd kernel, boot blocks and /etc/boot.conf..."
${SUDO} cp ${DESTDIR}/usr/mdec/boot ${MOUNTPOINT}/boot
${SUDO} cp ${KERNELFILE} ${MOUNTPOINT}/bsd
${SUDO} mkdir ${MOUNTPOINT}/etc
${SUDO} sed "/^stty/s/19200/${TTYSPEED}/" < ${CWD}/initial-conf/boot.conf > ${MOUNTPOINT}/etc/boot.conf

echo ""
echo "Installing boot blocks..."
${SUDO} /usr/mdec/installboot ${MOUNTPOINT}/boot ${DESTDIR}/usr/mdec/biosboot ${DEVICE}

${SUDO} mkdir ${MOUNTPOINT}/conf
${SUDO} mkdir ${MOUNTPOINT}/pkg
# Here is where you add your own packages and configuration to the flash...

echo ""
echo "Unmounting and cleaning up..."
${SUDO} umount $MOUNTPOINT
${SUDO} vnconfig -u $DEVICE

echo ""
echo "And we are done..."
echo "Run \"mountimage.sh $IMAGEFILE\" to add configuration and packages."
echo "When you are done with the configuration, gzip the imagefile and move"
echo "it to the system with a flashwriter."
echo "Use \"gunzip -c image.gz | dd of=/dev/sd0c\" on unix to write to flash"
echo "On Windows you can use http://m0n0.ch/wall/physdiskwrite.php"
echo "Both these utilities allow the gzipped image to be used directly."
Something went wrong with that request. Please try again.