Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
1 contributor

Users who have contributed to this file

38 lines (34 sloc) 1.32 KB
# USB VCP example.
# This example shows how to use the USB VCP class to send an image to PC on demand.
#
# WARNING:
# This script should NOT be run from the IDE or command line, it should be saved as main.py
# Note the following commented script shows how to receive the image from the host side.
#
# #!/usr/bin/env python2.7
# import sys, serial, struct
# port = '/dev/ttyACM0'
# sp = serial.Serial(port, baudrate=115200, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE,
# xonxoff=False, rtscts=False, stopbits=serial.STOPBITS_ONE, timeout=None, dsrdtr=True)
# sp.setDTR(True) # dsrdtr is ignored on Windows.
# sp.write("snap")
# sp.flush()
# size = struct.unpack('<L', sp.read(4))[0]
# img = sp.read(size)
# sp.close()
#
# with open("img.jpg", "w") as f:
# f.write(img)
import sensor, image, time, ustruct
from pyb import USB_VCP
usb = USB_VCP()
sensor.reset() # Reset and initialize the sensor.
sensor.set_pixformat(sensor.RGB565) # Set pixel format to RGB565 (or GRAYSCALE)
sensor.set_framesize(sensor.QVGA) # Set frame size to QVGA (320x240)
sensor.skip_frames(time = 2000) # Wait for settings take effect.
while(True):
cmd = usb.recv(4, timeout=5000)
if (cmd == b'snap'):
img = sensor.snapshot().compress()
usb.send(ustruct.pack("<L", img.size()))
usb.send(img)
You can’t perform that action at this time.