config.yaml

options:
  debug:
    type: boolean
    default: False
    description: Enable debug logging
  prefer-ipv6:
    type: boolean
    default: False
    description: |
      If True enables IPv6 support. The charm will expect network interfaces
      to be configured with an IPv6 address. If set to False (default) IPv4
      is expected.
      .
      NOTE: these charms do not currently support IPv6 privacy extension. In
      order for this charm to function correctly, the privacy extension must be
      disabled and a non-temporary address must be configured/available on
      your network interface.
  corosync_transport:
    type: string
    default: "unicast"
    description: |
      Two supported modes are multicast (udp) or unicast (udpu)
  corosync_mcastaddr:
    type: string
    default: 226.94.1.1
    description: |
      Multicast IP address to use for exchanging messages over the network.
      If multiple clusters are on the same bindnetaddr network, this value
      can be changed. Only used when corosync_transport = multicast.
  corosync_bindiface:
    type: string
    default:
    description: |
      Default network interface on which HA cluster will bind to communication
      with the other members of the HA Cluster. Defaults to the network
      interface hosting the units private-address. Only used when
      corosync_transport = multicast.
  corosync_mcastport:
    type: int
    default:
    description: |
      Default multicast port number that will be used to communicate between
      HA Cluster nodes. Only used when corosync_transport = multicast.
  corosync_key:
    type: string
    default: "64RxJNcCkwo8EJYBsaacitUvbQp5AW4YolJi5/2urYZYp2jfLxY+3IUCOaAUJHPle4Yqfy+WBXO0I/6ASSAjj9jaiHVNaxmVhhjcmyBqy2vtPf+m+0VxVjUXlkTyYsODwobeDdO3SIkbIABGfjLTu29yqPTsfbvSYr6skRb9ne0="
    description: |
      This value will become the Corosync authentication key. To generate
      a suitable value use:
      .
        sudo corosync-keygen
        sudo cat /etc/corosync/authkey | base64 -w 0
      .
      This configuration element is mandatory and the service will fail on
      install if it is not provided.  The value must be base64 encoded.
  maintenance-mode:
    type: boolean
    default: false
    description: |
      When enabled pacemaker will be put in maintenance mode, this will allow
      administrators to manipulate cluster resources (e.g. stop daemons, reboot
      machines, etc). Pacemaker will not monitor the resources while maintence
      mode is enabled.
  service_start_timeout:
    type: int
    default: 180
    description: |
      Systemd override value for corosync and pacemaker service start timeout
      in seconds. Set value to -1 turn off timeout for the services.
  service_stop_timeout:
    type: int
    default: 60
    description: |
      Systemd override value for corosync and pacemaker service stop timeout
      seconds. Set value to -1 turn off timeout for the services.
  stonith_enabled:
    type: string
    default: 'False'
    description: |
      Enable resource fencing (aka STONITH) for every node in the cluster.
      This requires MAAS credentials be provided and each node's power
      parameters are properly configured in its inventory.
  maas_url:
    type: string
    default:
    description: MAAS API endpoint (required for STONITH).
  maas_credentials:
    type: string
    default:
    description: MAAS credentials (required for STONITH).
  maas_source:
    type: string
    default: ppa:maas/stable
    description: |
      PPA for python3-maas-client:
      .
        - ppa:maas/stable
        - ppa:maas/next
      .
      The last option should be used in conjunction with the key configuration
      option. Used when service_dns is set on the primary charm for DNS HA.
  cluster_count:
    type: int
    default: 3
    description: |
      Number of peer units required to bootstrap cluster services.
      .
      If less that 3 is specified, the cluster will be configured to
      ignore any quorum problems; with 3 or more units, quorum will be
      enforced and services will be stopped in the event of a loss
      of quorum. It is best practice to set this value to the expected
      number of units to avoid potential race conditions.
  monitor_host:
    type: string
    default:
    description: |
      One or more IPs, separated by space, that will be used as a safety check
      for avoiding split brain situations. Nodes in the cluster will ping these
      IPs periodically. Node that can not ping monitor_host will not run shared
      resources (VIP, shared disk...).
  monitor_interval:
    type: string
    default: 5s
    description: |
      Time period between checks of resource health. It consists of a number
      and a time factor, e.g. 5s = 5 seconds. 2m = 2 minutes.
  netmtu:
    type: int
    default:
    description: |
      Specifies the corosync.conf network mtu. If unset, the default
      corosync.conf value is used (currently 1500). See 'man corosync.conf' for
      detailed information on this config option.
  # Monitoring config
  nagios_context:
    type: string
    default: "juju"
    description: |
      Used by the nrpe-external-master subordinate charm.
      A string that will be prepended to instance name to set the host name
      in nagios. So for instance the hostname would be something like:
      .
         juju-postgresql-0
      .
      If you're running multiple environments with the same services in them
      this allows you to differentiate between them.
  nagios_servicegroups:
    type: string
    default: ""
    description: |
      A comma-separated list of nagios servicegroups. If left empty, the
      nagios_context will be used as the servicegroup.