Permalink
Fetching contributors…
Cannot retrieve contributors at this time
451 lines (440 sloc) 17.4 KB
[DEFAULT]
# bind_ip = 0.0.0.0
bind_port = 6201
# bind_timeout = 30
# backlog = 4096
# user = swift
# swift_dir = /etc/swift
# devices = /srv/node
# mount_check = true
# disable_fallocate = false
#
# Use an integer to override the number of pre-forked processes that will
# accept connections.
# workers = auto
#
# Maximum concurrent requests per worker
# max_clients = 1024
#
# This is a comma separated list of hosts allowed in the X-Container-Sync-To
# field for containers. This is the old-style of using container sync. It is
# strongly recommended to use the new style of a separate
# container-sync-realms.conf -- see container-sync-realms.conf-sample
# allowed_sync_hosts = 127.0.0.1
#
# You can specify default log routing here if you want:
# log_name = swift
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
# The following caps the length of log lines to the value given; no limit if
# set to 0, the default.
# log_max_line_length = 0
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =
#
# If you don't mind the extra disk space usage in overhead, you can turn this
# on to preallocate disk space with SQLite databases to decrease fragmentation.
# db_preallocation = off
#
# eventlet_debug = false
#
# You can set fallocate_reserve to the number of bytes or percentage of disk
# space you'd like fallocate to reserve, whether there is space for the given
# file size or not. Percentage will be used if the value ends with a '%'.
# fallocate_reserve = 1%
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
#
# The prefix used for hidden auto-created accounts, for example accounts in
# which shard containers are created. Defaults to '.'.
# auto_create_account_prefix = .
[pipeline:main]
pipeline = healthcheck recon container-server
[app:container-server]
use = egg:swift#container
# You can override the default log routing for this app here:
# set log_name = container-server
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_requests = true
# set log_address = /dev/log
#
# node_timeout = 3
# conn_timeout = 0.5
# allow_versions = false
# auto_create_account_prefix = .
#
# Configure parameter for creating specific server
# To handle all verbs, including replication verbs, do not specify
# "replication_server" (this is the default). To only handle replication,
# set to a True value (e.g. "True" or "1"). To handle only non-replication
# verbs, set to "False". Unless you have a separate replication network, you
# should not specify any value for "replication_server".
# replication_server = false
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
#
# You can set fallocate_reserve to the number of bytes or percentage
# of disk space you'd like kept free at all times. If the disk's free
# space falls below this value, then PUT, POST, and REPLICATE requests
# will be denied until the disk ha s more space available. Percentage
# will be used if the value ends with a '%'.
# fallocate_reserve = 1%
[filter:healthcheck]
use = egg:swift#healthcheck
# An optional filesystem path, which if present, will cause the healthcheck
# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
# disable_path =
[filter:recon]
use = egg:swift#recon
#recon_cache_path = /var/cache/swift
[container-replicator]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-replicator
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Maximum number of database rows that will be sync'd in a single HTTP
# replication request. Databases with less than or equal to this number of
# differing rows will always be sync'd using an HTTP replication request rather
# than using rsync.
# per_diff = 1000
#
# Maximum number of HTTP replication requests attempted on each replication
# pass for any one container. This caps how long the replicator will spend
# trying to sync a given database per pass so the other databases don't get
# starved.
# max_diffs = 100
#
# Number of replication workers to spawn.
# concurrency = 8
#
# Time in seconds to wait between replication passes
# interval = 30
# run_pause is deprecated, use interval instead
# run_pause = 30
#
# node_timeout = 10
# conn_timeout = 0.5
#
# The replicator also performs reclamation
# reclaim_age = 604800
#
# Allow rsync to compress data which is transmitted to destination node
# during sync. However, this is applicable only when destination node is in
# a different region than the local one.
# rsync_compress = no
#
# Format of the rsync module where the replicator will send data. See
# etc/rsyncd.conf-sample for some usage examples.
# rsync_module = {replication_ip}::container
#
# recon_cache_path = /var/cache/swift
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
#
# The handoffs_only mode option is for special-case emergency
# situations such as full disks in the cluster. This option SHOULD NOT
# BE ENABLED except in emergencies. When handoffs_only mode is enabled
# the replicator will *only* replicate from handoff nodes to primary
# nodes and will not sync primary nodes with other primary nodes.
#
# This has two main effects: first, the replicator becomes much more
# effective at removing misplaced databases, thereby freeing up disk
# space at a much faster pace than normal. Second, the replicator does
# not sync data between primary nodes, so out-of-sync account and
# container listings will not resolve while handoffs_only is enabled.
#
# This mode is intended to allow operators to temporarily sacrifice
# consistency in order to gain faster rebalancing, such as during a
# capacity addition with nearly-full disks. It is not intended for
# long-term use.
#
# handoffs_only = no
[container-updater]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-updater
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# interval = 300
# concurrency = 4
# node_timeout = 3
# conn_timeout = 0.5
#
# Send at most this many container updates per second
# containers_per_second = 50
#
# slowdown will sleep that amount between containers. Deprecated; use
# containers_per_second instead.
# slowdown = 0.01
#
# Seconds to suppress updating an account that has generated an error
# account_suppression_time = 60
#
# recon_cache_path = /var/cache/swift
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
[container-auditor]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-auditor
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Will audit each container at most once per interval
# interval = 1800
#
# containers_per_second = 200
# recon_cache_path = /var/cache/swift
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
[container-sync]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-sync
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# If you need to use an HTTP Proxy, set it here; defaults to no proxy.
# You can also set this to a comma separated list of HTTP Proxies and they will
# be randomly used (simple load balancing).
# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888
#
# Will sync each container at most once per interval
# interval = 300
#
# Maximum amount of time to spend syncing each container per pass
# container_time = 60
#
# Maximum amount of time in seconds for the connection attempt
# conn_timeout = 5
# Server errors from requests will be retried by default
# request_tries = 3
#
# Internal client config file path
# internal_client_conf_path = /etc/swift/internal-client.conf
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
# Note: Put it at the beginning of the pipeline to profile all middleware. But
# it is safer to put this after healthcheck.
[filter:xprofile]
use = egg:swift#xprofile
# This option enable you to switch profilers which should inherit from python
# standard profiler. Currently the supported value can be 'cProfile',
# 'eventlet.green.profile' etc.
# profile_module = eventlet.green.profile
#
# This prefix will be used to combine process ID and timestamp to name the
# profile data file. Make sure the executing user has permission to write
# into this path (missing path segments will be created, if necessary).
# If you enable profiling in more than one type of daemon, you must override
# it with an unique value like: /var/log/swift/profile/container.profile
# log_filename_prefix = /tmp/log/swift/profile/default.profile
#
# the profile data will be dumped to local disk based on above naming rule
# in this interval.
# dump_interval = 5.0
#
# Be careful, this option will enable profiler to dump data into the file with
# time stamp which means there will be lots of files piled up in the directory.
# dump_timestamp = false
#
# This is the path of the URL to access the mini web UI.
# path = /__profile__
#
# Clear the data when the wsgi server shutdown.
# flush_at_shutdown = false
#
# unwind the iterator of applications
# unwind = false
[container-sharder]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-sharder
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Container sharder specific settings
#
# If the auto_shard option is true then the sharder will automatically select
# containers to shard, scan for shard ranges, and select shards to shrink.
# The default is false.
# Warning: auto-sharding is still under development and should not be used in
# production; do not set this option to true in a production cluster.
# auto_shard = false
#
# When auto-sharding is enabled shard_container_threshold defines the object
# count at which a container with container-sharding enabled will start to
# shard. shard_container_threshold also indirectly determines the initial
# nominal size of shard containers, which is shard_container_threshold // 2, as
# well as determining the thresholds for shrinking and merging shard
# containers.
# shard_container_threshold = 1000000
#
# When auto-sharding is enabled shard_shrink_point defines the object count
# below which a 'donor' shard container will be considered for shrinking into
# another 'acceptor' shard container. shard_shrink_point is a percentage of
# shard_container_threshold e.g. the default value of 5 means 5% of the
# shard_container_threshold.
# shard_shrink_point = 5
#
# When auto-sharding is enabled shard_shrink_merge_point defines the maximum
# allowed size of an acceptor shard container after having a donor merged into
# it. Shard_shrink_merge_point is a percentage of shard_container_threshold.
# e.g. the default value of 75 means that the projected sum of a donor object
# count and acceptor count must be less than 75% of shard_container_threshold
# for the donor to be allowed to merge into the acceptor.
#
# For example, if the shard_container_threshold is 1 million,
# shard_shrink_point is 5, and shard_shrink_merge_point is 75 then a shard will
# be considered for shrinking if it has less than or equal to 50 thousand
# objects but will only merge into an acceptor if the combined object count
# would be less than or equal to 750 thousand objects.
# shard_shrink_merge_point = 75
#
# When auto-sharding is enabled shard_scanner_batch_size defines the maximum
# number of shard ranges that will be found each time the sharder daemon visits
# a sharding container. If necessary the sharder daemon will continue to search
# for more shard ranges each time it visits the container.
# shard_scanner_batch_size = 10
#
# cleave_batch_size defines the number of shard ranges that will be cleaved
# each time the sharder daemon visits a sharding container.
# cleave_batch_size = 2
#
# cleave_row_batch_size defines the size of batches of object rows read from a
# sharding container and merged to a shard container during cleaving.
# cleave_row_batch_size = 10000
#
# Defines the number of successfully replicated shard dbs required when
# cleaving a previously uncleaved shard range before the sharder will progress
# to the next shard range. The value should be less than or equal to the
# container ring replica count. The default of 'auto' causes the container ring
# quorum value to be used. This option only applies to the container-sharder
# replication and does not affect the number of shard container replicas that
# will eventually be replicated by the container-replicator.
# shard_replication_quorum = auto
#
# Defines the number of successfully replicated shard dbs required when
# cleaving a shard range that has been previously cleaved on another node
# before the sharder will progress to the next shard range. The value should be
# less than or equal to the container ring replica count. The default of 'auto'
# causes the shard_replication_quorum value to be used. This option only
# applies to the container-sharder replication and does not affect the number
# of shard container replicas that will eventually be replicated by the
# container-replicator.
# existing_shard_replication_quorum = auto
#
# The sharder uses an internal client to create and make requests to
# containers. The absolute path to the client config file can be configured.
# internal_client_conf_path = /etc/swift/internal-client.conf
#
# The number of time the internal client will retry requests.
# request_tries = 3
#
# Each time the sharder dumps stats to the recon cache file it includes a list
# of containers that appear to need sharding but are not yet sharding. By
# default this list is limited to the top 5 containers, ordered by object
# count. The limit may be changed by setting recon_candidates_limit to an
# integer value. A negative value implies no limit.
# recon_candidates_limit = 5
#
# Large databases tend to take a while to work with, but we want to make sure
# we write down our progress. Use a larger-than-normal broker timeout to make
# us less likely to bomb out on a LockTimeout.
# broker_timeout = 60
#
# Time in seconds to wait between sharder cycles
# interval = 30
#
# The container-sharder accepts the following configuration options as defined
# in the container-replicator section:
#
# per_diff = 1000
# max_diffs = 100
# concurrency = 8
# node_timeout = 10
# conn_timeout = 0.5
# reclaim_age = 604800
# rsync_compress = no
# rsync_module = {replication_ip}::container
# recon_cache_path = /var/cache/swift
#