Permalink
Browse files

#8936. запихать конфиги devise в engine

  • Loading branch information...
1 parent a9a8717 commit e0c6258fd373abc9c3d0ce0738a1d994afc6dff4 @lda lda committed Dec 13, 2011
Showing with 75 additions and 211 deletions.
  1. +75 −0 config/initializers/devise.rb
  2. +0 −211 spec/dummy/config/initializers/devise.rb
@@ -0,0 +1,75 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+ # ==> ORM configuration
+ # Load and configure the ORM. Supports :active_record (default) and
+ # :mongoid (bson_ext recommended) by default. Other ORMs may be
+ # available as additional gems.
+ require 'devise/orm/active_record'
+
+ # ==> Configuration for :timeoutable
+ # The time you want to timeout the user session without activity. After this
+ # time the user will be asked for credentials again. Default is 30 minutes.
+ # config.timeout_in = 30.minutes
+
+ # ==> Configuration for :lockable
+ # Defines which strategy will be used to lock an account.
+ # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+ # :none = No lock strategy. You should handle locking by yourself.
+ # config.lock_strategy = :failed_attempts
+
+ # Defines which key will be used when locking and unlocking an account
+ # config.unlock_keys = [ :email ]
+
+ # Defines which strategy will be used to unlock an account.
+ # :email = Sends an unlock link to the user email
+ # :time = Re-enables login after a certain amount of time (see :unlock_in below)
+ # :both = Enables both strategies
+ # :none = No unlock strategy. You should handle unlocking by yourself.
+ # config.unlock_strategy = :both
+
+ # Number of authentication tries before locking an account if lock_strategy
+ # is failed attempts.
+ # config.maximum_attempts = 20
+
+ # Time interval to unlock the account if :time is enabled as unlock_strategy.
+ # config.unlock_in = 1.hour
+
+ # ==> Configuration for :token_authenticatable
+ # Defines name of the authentication token params key
+ # config.token_authentication_key = :auth_token
+
+ # If true, authentication through token does not store user in session and needs
+ # to be supplied on each request. Useful if you are using the token as API token.
+ # config.stateless_token = false
+
+ # ==> Scopes configuration
+ # Turn scoped views on. Before rendering "sessions/new", it will first check for
+ # "users/sessions/new". It's turned off by default because it's slower if you
+ # are using only default views.
+ # config.scoped_views = false
+
+ # Configure the default scope given to Warden. By default it's the first
+ # devise role declared in your routes (usually :user).
+ # config.default_scope = :user
+
+ # Configure sign_out behavior.
+ # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
+ # The default is true, which means any logout action will sign out all active scopes.
+ # config.sign_out_all_scopes = true
+
+ # ==> Navigation configuration
+ # Lists the formats that should be treated as navigational. Formats like
+ # :html, should redirect to the sign in page when the user does not have
+ # access, but formats like :xml or :json, should return 401.
+ #
+ # If you have any extra navigational formats, like :iphone or :mobile, you
+ # should add them to the navigational formats lists.
+ #
+ # The :"*/*" and "*/*" formats below is required to match Internet
+ # Explorer requests.
+ # config.navigational_formats = [:"*/*", "*/*", :html]
+
+ # The default HTTP method used to sign out a resource. Default is :delete.
+ config.sign_out_via = :delete
+end
@@ -1,211 +0,0 @@
-# Use this hook to configure devise mailer, warden hooks and so forth.
-# Many of these configuration options can be set straight in your model.
-Devise.setup do |config|
- # ==> Mailer Configuration
- # Configure the e-mail address which will be shown in Devise::Mailer,
- # note that it will be overwritten if you use your own mailer class with default "from" parameter.
- config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
-
- # Configure the class responsible to send e-mails.
- # config.mailer = "Devise::Mailer"
-
- # ==> ORM configuration
- # Load and configure the ORM. Supports :active_record (default) and
- # :mongoid (bson_ext recommended) by default. Other ORMs may be
- # available as additional gems.
- require 'devise/orm/active_record'
-
- # ==> Configuration for any authentication mechanism
- # Configure which keys are used when authenticating a user. The default is
- # just :email. You can configure it to use [:username, :subdomain], so for
- # authenticating a user, both parameters are required. Remember that those
- # parameters are used only when authenticating and not when retrieving from
- # session. If you need permissions, you should implement that in a before filter.
- # You can also supply a hash where the value is a boolean determining whether
- # or not authentication should be aborted when the value is not present.
- # config.authentication_keys = [ :email ]
-
- # Configure parameters from the request object used for authentication. Each entry
- # given should be a request method and it will automatically be passed to the
- # find_for_authentication method and considered in your model lookup. For instance,
- # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
- # The same considerations mentioned for authentication_keys also apply to request_keys.
- # config.request_keys = []
-
- # Configure which authentication keys should be case-insensitive.
- # These keys will be downcased upon creating or modifying a user and when used
- # to authenticate or find a user. Default is :email.
- config.case_insensitive_keys = [ :email ]
-
- # Configure which authentication keys should have whitespace stripped.
- # These keys will have whitespace before and after removed upon creating or
- # modifying a user and when used to authenticate or find a user. Default is :email.
- config.strip_whitespace_keys = [ :email ]
-
- # Tell if authentication through request.params is enabled. True by default.
- # config.params_authenticatable = true
-
- # Tell if authentication through HTTP Basic Auth is enabled. False by default.
- # config.http_authenticatable = false
-
- # If http headers should be returned for AJAX requests. True by default.
- # config.http_authenticatable_on_xhr = true
-
- # The realm used in Http Basic Authentication. "Application" by default.
- # config.http_authentication_realm = "Application"
-
- # It will change confirmation, password recovery and other workflows
- # to behave the same regardless if the e-mail provided was right or wrong.
- # Does not affect registerable.
- # config.paranoid = true
-
- # ==> Configuration for :database_authenticatable
- # For bcrypt, this is the cost for hashing the password and defaults to 10. If
- # using other encryptors, it sets how many times you want the password re-encrypted.
- #
- # Limiting the stretches to just one in testing will increase the performance of
- # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
- # a value less than 10 in other environments.
- config.stretches = Rails.env.test? ? 1 : 10
-
- # Setup a pepper to generate the encrypted password.
- # config.pepper = "196b5a288f1e8d6cf6ff2a0782059502c0a8dac4deca1c2e5b7450a15c0fe4697211ea430d0352766891054c08200ef78a4651c50ca0df6cef96f4b6b7230697"
-
- # ==> Configuration for :confirmable
- # A period that the user is allowed to access the website even without
- # confirming his account. For instance, if set to 2.days, the user will be
- # able to access the website for two days without confirming his account,
- # access will be blocked just in the third day. Default is 0.days, meaning
- # the user cannot access the website without confirming his account.
- # config.confirm_within = 2.days
-
- # Defines which key will be used when confirming an account
- # config.confirmation_keys = [ :email ]
-
- # ==> Configuration for :rememberable
- # The time the user will be remembered without asking for credentials again.
- # config.remember_for = 2.weeks
-
- # If true, a valid remember token can be re-used between multiple browsers.
- # config.remember_across_browsers = true
-
- # If true, extends the user's remember period when remembered via cookie.
- # config.extend_remember_period = false
-
- # If true, uses the password salt as remember token. This should be turned
- # to false if you are not using database authenticatable.
- config.use_salt_as_remember_token = true
-
- # Options to be passed to the created cookie. For instance, you can set
- # :secure => true in order to force SSL only cookies.
- # config.cookie_options = {}
-
- # ==> Configuration for :validatable
- # Range for password length. Default is 6..128.
- # config.password_length = 6..128
-
- # Email regex used to validate email formats. It simply asserts that
- # an one (and only one) @ exists in the given string. This is mainly
- # to give user feedback and not to assert the e-mail validity.
- # config.email_regexp = /\A[^@]+@[^@]+\z/
-
- # ==> Configuration for :timeoutable
- # The time you want to timeout the user session without activity. After this
- # time the user will be asked for credentials again. Default is 30 minutes.
- # config.timeout_in = 30.minutes
-
- # ==> Configuration for :lockable
- # Defines which strategy will be used to lock an account.
- # :failed_attempts = Locks an account after a number of failed attempts to sign in.
- # :none = No lock strategy. You should handle locking by yourself.
- # config.lock_strategy = :failed_attempts
-
- # Defines which key will be used when locking and unlocking an account
- # config.unlock_keys = [ :email ]
-
- # Defines which strategy will be used to unlock an account.
- # :email = Sends an unlock link to the user email
- # :time = Re-enables login after a certain amount of time (see :unlock_in below)
- # :both = Enables both strategies
- # :none = No unlock strategy. You should handle unlocking by yourself.
- # config.unlock_strategy = :both
-
- # Number of authentication tries before locking an account if lock_strategy
- # is failed attempts.
- # config.maximum_attempts = 20
-
- # Time interval to unlock the account if :time is enabled as unlock_strategy.
- # config.unlock_in = 1.hour
-
- # ==> Configuration for :recoverable
- #
- # Defines which key will be used when recovering the password for an account
- # config.reset_password_keys = [ :email ]
-
- # Time interval you can reset your password with a reset password key.
- # Don't put a too small interval or your users won't have the time to
- # change their passwords.
- config.reset_password_within = 2.hours
-
- # ==> Configuration for :encryptable
- # Allow you to use another encryption algorithm besides bcrypt (default). You can use
- # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
- # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
- # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
- # REST_AUTH_SITE_KEY to pepper)
- # config.encryptor = :sha512
-
- # ==> Configuration for :token_authenticatable
- # Defines name of the authentication token params key
- # config.token_authentication_key = :auth_token
-
- # If true, authentication through token does not store user in session and needs
- # to be supplied on each request. Useful if you are using the token as API token.
- # config.stateless_token = false
-
- # ==> Scopes configuration
- # Turn scoped views on. Before rendering "sessions/new", it will first check for
- # "users/sessions/new". It's turned off by default because it's slower if you
- # are using only default views.
- # config.scoped_views = false
-
- # Configure the default scope given to Warden. By default it's the first
- # devise role declared in your routes (usually :user).
- # config.default_scope = :user
-
- # Configure sign_out behavior.
- # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
- # The default is true, which means any logout action will sign out all active scopes.
- # config.sign_out_all_scopes = true
-
- # ==> Navigation configuration
- # Lists the formats that should be treated as navigational. Formats like
- # :html, should redirect to the sign in page when the user does not have
- # access, but formats like :xml or :json, should return 401.
- #
- # If you have any extra navigational formats, like :iphone or :mobile, you
- # should add them to the navigational formats lists.
- #
- # The :"*/*" and "*/*" formats below is required to match Internet
- # Explorer requests.
- # config.navigational_formats = [:"*/*", "*/*", :html]
-
- # The default HTTP method used to sign out a resource. Default is :delete.
- config.sign_out_via = :delete
-
- # ==> OmniAuth
- # Add a new OmniAuth provider. Check the wiki for more information on setting
- # up on your models and hooks.
- # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
- config.omniauth :identity, Settings['sso_provider.app_id'], Settings['sso_provider.app_secret'], :client_options => {:site => Settings['sso_provider.host']}
-
-
- # ==> Warden configuration
- # If you want to use other strategies, that are not supported by Devise, or
- # change the failure app, you can configure them inside the config.warden block.
- #
- # config.warden do |manager|
- # manager.intercept_401 = false
- # manager.default_strategies(:scope => :user).unshift :some_external_strategy
- # end
-end

0 comments on commit e0c6258

Please sign in to comment.