Skip to content
Permalink
Branch: master
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
477 lines (424 sloc) 11.1 KB
/*
* Copyright (c) 2016, The OpenThread Authors.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @file
* This file includes the platform-specific configuration.
*
*/
#ifndef PLATFORM_CONFIG_H_
#define PLATFORM_CONFIG_H_
#include "nrf.h"
#include "nrf_peripherals.h"
#include "drivers/clock/nrf_drv_clock.h"
#include "hal/nrf_radio.h"
#include "hal/nrf_uart.h"
#include "openthread-core-config.h"
#include <openthread/config.h>
/*******************************************************************************
* @section UART Driver Configuration.
******************************************************************************/
/**
* @def UART_INSTANCE
*
* UART Instance.
*
*/
#ifndef UART_INSTANCE
#define UART_INSTANCE NRF_UART0
#endif
/**
* @def UART_PARITY
*
* UART Parity configuration.
*
* @brief Possible values:
* \ref NRF_UART_PARITY_EXCLUDED - Parity bit is not present.
* \ref NRF_UART_PARITY_INCLUDED - Parity bit is present.
*
*/
#ifndef UART_PARITY
#define UART_PARITY NRF_UART_PARITY_EXCLUDED
#endif
/**
* @def UART_HWFC_ENABLED
*
* Enable UART Hardware Flow Control.
*
*/
#ifndef UART_HWFC_ENABLED
#define UART_HWFC_ENABLED 1
#endif
/**
* @def UART_BAUDRATE
*
* UART Baudrate.
*
* @brief Possible values:
* \ref NRF_UART_BAUDRATE_1200 - 1200 baud.
* \ref NRF_UART_BAUDRATE_2400 - 2400 baud.
* \ref NRF_UART_BAUDRATE_4800 - 4800 baud.
* \ref NRF_UART_BAUDRATE_9600 - 9600 baud.
* \ref NRF_UART_BAUDRATE_14400 - 14400 baud.
* \ref NRF_UART_BAUDRATE_19200 - 19200 baud.
* \ref NRF_UART_BAUDRATE_28800 - 28800 baud.
* \ref NRF_UART_BAUDRATE_38400 - 38400 baud.
* \ref NRF_UART_BAUDRATE_57600 - 57600 baud.
* \ref NRF_UART_BAUDRATE_76800 - 76800 baud.
* \ref NRF_UART_BAUDRATE_115200 - 115200 baud.
* \ref NRF_UART_BAUDRATE_230400 - 230400 baud.
* \ref NRF_UART_BAUDRATE_250000 - 250000 baud.
* \ref NRF_UART_BAUDRATE_460800 - 460800 baud.
* \ref NRF_UART_BAUDRATE_921600 - 921600 baud.
* \ref NRF_UART_BAUDRATE_1000000 - 1000000 baud.
*
*/
#ifndef UART_BAUDRATE
#define UART_BAUDRATE NRF_UART_BAUDRATE_115200
#endif
/**
* @def UART_IRQN
*
* UART Interrupt number.
*
*/
#ifndef UART_IRQN
#define UART_IRQN UARTE0_UART0_IRQn
#endif
/**
* @def UART_IRQ_PRIORITY
*
* UART Interrupt priority.
*
*/
#ifndef UART_IRQ_PRIORITY
#define UART_IRQ_PRIORITY 6
#endif
/**
* @def UART_RX_BUFFER_SIZE
*
* UART Receive buffer size.
*
*/
#ifndef UART_RX_BUFFER_SIZE
#define UART_RX_BUFFER_SIZE 256
#endif
/**
* @def UART_PIN_TX
*
* UART TX Pin.
*
*/
#ifndef UART_PIN_TX
#define UART_PIN_TX 6
#endif
/**
* @def UART_PIN_RX
*
* UART RX Pin.
*
*/
#ifndef UART_PIN_RX
#define UART_PIN_RX 8
#endif
/**
* @def UART_PIN_CTS
*
* UART CTS Pin.
*
*/
#ifndef UART_PIN_CTS
#define UART_PIN_CTS 7
#endif
/**
* @def UART_PIN_RTS
*
* UART RTS Pin.
*
*/
#ifndef UART_PIN_RTS
#define UART_PIN_RTS 5
#endif
/*******************************************************************************
* @section Alarm Driver Configuration.
******************************************************************************/
/**
* @def RTC_INSTANCE
*
* RTC Instance.
*
*/
#ifndef RTC_INSTANCE
#define RTC_INSTANCE NRF_RTC2
#endif
/**
* @def RTC_IRQ_HANDLER
*
* RTC interrupt handler name
*
*/
#ifndef RTC_IRQ_HANDLER
#define RTC_IRQ_HANDLER RTC2_IRQHandler
#endif
/**
* @def RTC_IRQN
*
* RTC Interrupt number.
*
*/
#ifndef RTC_IRQN
#define RTC_IRQN RTC2_IRQn
#endif
/**
* @def RTC_IRQ_PRIORITY
*
* RTC Interrupt priority.
*
*/
#ifndef RTC_IRQ_PRIORITY
#define RTC_IRQ_PRIORITY 6
#endif
/*******************************************************************************
* @section Random Number Generator Driver Configuration.
******************************************************************************/
/**
* @def RNG_BUFFER_SIZE
*
* True Random Number Generator buffer size.
*
*/
#ifndef RNG_BUFFER_SIZE
#define RNG_BUFFER_SIZE 64
#endif
/**
* @def RNG_IRQ_PRIORITY
*
* RNG Interrupt priority.
*
*/
#ifndef RNG_IRQ_PRIORITY
#define RNG_IRQ_PRIORITY 6
#endif
/*******************************************************************************
* @section SPI Slave configuration.
******************************************************************************/
/**
* @def SPIS Instance.
*/
#ifndef SPIS_INSTANCE
#define SPIS_INSTANCE NRF_SPIS0
#endif
/**
* @def SPIS mode.
*
* @brief Possible values:
* \ref NRF_SPIS_MODE_0 - SCK active high, sample on leading edge of clock.
* \ref NRF_SPIS_MODE_1 - SCK active high, sample on trailing edge of clock.
* \ref NRF_SPIS_MODE_2 - SCK active low, sample on leading edge of clock.
* \ref NRF_SPIS_MODE_3 - SCK active low, sample on trailing edge of clock.
*/
#ifndef SPIS_MODE
#define SPIS_MODE NRF_SPIS_MODE_0
#endif
/**
* @def SPIS bit orders.
*
* @brief Possible values:
* \ref NRF_SPIS_BIT_ORDER_MSB_FIRST - Most significant bit shifted out first.
* \ref NRF_SPIS_BIT_ORDER_LSB_FIRST - Least significant bit shifted out first.
*/
#ifndef SPIS_BIT_ORDER
#define SPIS_BIT_ORDER NRF_SPIS_BIT_ORDER_MSB_FIRST
#endif
/**
* @def SPIS Interrupt number.
*/
#ifndef SPIS_IRQN
#define SPIS_IRQN SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn
#endif
/**
* @def SPIS Interrupt priority.
*/
#ifndef SPIS_IRQ_PRIORITY
#define SPIS_IRQ_PRIORITY 6
#endif
/**
* @def SPIS MOSI Pin.
*/
#ifndef SPIS_PIN_MOSI
#define SPIS_PIN_MOSI 4
#endif
/**
* @def SPIS MISO Pin.
*/
#ifndef SPIS_PIN_MISO
#define SPIS_PIN_MISO 28
#endif
/**
* @def SPIS SCK Pin.
*/
#ifndef SPIS_PIN_SCK
#define SPIS_PIN_SCK 3
#endif
/**
* @def SPIS CSN Pin.
*/
#ifndef SPIS_PIN_CSN
#define SPIS_PIN_CSN 29
#endif
/**
* @def SPIS Host IRQ Pin.
*/
#ifndef SPIS_PIN_HOST_IRQ
#define SPIS_PIN_HOST_IRQ 30
#endif
/*******************************************************************************
* @section USB driver configuration.
******************************************************************************/
/**
* @def USB_HOST_UART_CONFIG_DELAY_MS
*
* Delay after DTR gets asserted that we start send any queued data. This allows slow
* Linux-based hosts to have enough time to configure their port for raw mode.
*
*/
#ifndef USB_HOST_UART_CONFIG_DELAY_MS
#define USB_HOST_UART_CONFIG_DELAY_MS 10
#endif
/**
* @def USB_CDC_AS_SERIAL_TRANSPORT
*
* Use USB CDC driver for serial communication.
*/
#ifndef USB_CDC_AS_SERIAL_TRANSPORT
#define USB_CDC_AS_SERIAL_TRANSPORT 0
#endif
/**
* @def The USB interface to use for CDC ACM COMM.
*
* According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
* limitation. Takes values between 0-255.
*/
#ifndef USB_CDC_ACM_COMM_INTERFACE
#define USB_CDC_ACM_COMM_INTERFACE 1
#endif
/**
* @def The USB interface to use for CDC ACM DATA.
*
* According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
* limitation. Takes values between 0-255.
*/
#ifndef USB_CDC_ACM_DATA_INTERFACE
#define USB_CDC_ACM_DATA_INTERFACE 2
#endif
/**
* @def OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
*
* Reset the application, not the chip, when a software reset is requested.
* via `otPlatReset()`.
*/
#ifndef OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
#define OPENTHREAD_PLATFORM_USE_PSEUDO_RESET USB_CDC_AS_SERIAL_TRANSPORT
#endif
/*******************************************************************************
* @section Platform FEM Configuration
******************************************************************************/
/**
* @def PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
*
* Enable default front end module configuration.
*
*/
#ifndef PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
#define PLATFORM_FEM_ENABLE_DEFAULT_CONFIG 0
#endif
/*******************************************************************************
* @section Radio driver configuration.
******************************************************************************/
/**
* @def NRF_802154_PENDING_SHORT_ADDRESSES
*
* Number of slots containing short addresses of nodes for which pending data is stored.
*
*/
#ifndef NRF_802154_PENDING_SHORT_ADDRESSES
#define NRF_802154_PENDING_SHORT_ADDRESSES OPENTHREAD_CONFIG_MAX_CHILDREN
#endif
/**
* @def NRF_802154_PENDING_EXTENDED_ADDRESSES
*
* Number of slots containing extended addresses of nodes for which pending data is stored.
*
*/
#ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
#define NRF_802154_PENDING_EXTENDED_ADDRESSES OPENTHREAD_CONFIG_MAX_CHILDREN
#endif
/**
* @def NRF_802154_CSMA_CA_ENABLED
*
* If CSMA-CA procedure should be enabled by the driver. Disabling CSMA-CA procedure improves
* driver performance.
*
*/
#ifndef NRF_802154_CSMA_CA_ENABLED
#define NRF_802154_CSMA_CA_ENABLED 1
#endif
/**
* @def NRF_802154_ACK_TIMEOUT_ENABLED
*
* If ACK timeout feature should be enabled in the driver.
*
*/
#ifndef NRF_802154_ACK_TIMEOUT_ENABLED
#define NRF_802154_ACK_TIMEOUT_ENABLED 1
#endif
/*******************************************************************************
* @section Temperature sensor driver configuration.
******************************************************************************/
/**
* @def TEMP_MEASUREMENT_INTERVAL
*
* Interval of consecutive temperature measurements [s].
*
*/
#ifndef TEMP_MEASUREMENT_INTERVAL
#define TEMP_MEASUREMENT_INTERVAL 30
#endif
/**
* @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
*
* If notification of started transmission should be enabled in the driver.
*
* @note This feature must be enabled to support Header IE related features.
*
*/
#ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
#if OPENTHREAD_CONFIG_HEADER_IE_SUPPORT
#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
#endif
#endif
#endif // PLATFORM_CONFIG_H_
You can’t perform that action at this time.