New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

2.2.1 RC1: GV 'min' property corrupted during conversion from 2.1.9 to 2.2.1 #5466

Closed
RC-SOAR opened this Issue Dec 5, 2017 · 2 comments

Comments

Projects
None yet
2 participants
@RC-SOAR

RC-SOAR commented Dec 5, 2017

Just noticed a couple of GV related issues, after converting an eeprom image from 2.1 to 2.2.1 using 2.2.1 RC1. The eeprom targets the X9D.

Steps to reproduce:

  1. Download .eepe file from here
  2. Open .eepe file into Companion 2.1.9 with X9D profile. Note the GV values.
  3. Open .eepe file, this time in Companion 2.2.1 RC1 also with X9D profile. Eeprom appears to convert okay, but GV definitions are corrupted, with min set to +1024.

Also SF1, SF2 and SF3 fail to update the GVs correctly as the source channels change. This is easiest to see with GV9: it should track the TrmR (rudder trim) value, instead the value jumps to 1024 immediately the flight mode is changed (GV9 is configured as 'own value' in each flight mode).

@kilrah kilrah added this to the OpenTX 2.2.1 milestone Dec 5, 2017

@RC-SOAR

This comment has been minimized.

Show comment
Hide comment
@RC-SOAR

RC-SOAR Dec 5, 2017

Just to add: the issue also shows up if the target for the conversion is an X10 (and maybe other boards).
I have not tested in-situ translation (on the tx).

RC-SOAR commented Dec 5, 2017

Just to add: the issue also shows up if the target for the conversion is an X10 (and maybe other boards).
I have not tested in-situ translation (on the tx).

mpaperno added a commit that referenced this issue Dec 7, 2017

@bsongis bsongis closed this in #5477 Dec 8, 2017

@RC-SOAR

This comment has been minimized.

Show comment
Hide comment
@RC-SOAR

RC-SOAR Dec 8, 2017

Thanks! I can't see any nightly builds, so I hope there will be an RC2 for some final testing on my F3X sailplane setups.

RC-SOAR commented Dec 8, 2017

Thanks! I can't see any nightly builds, so I hope there will be an RC2 for some final testing on my F3X sailplane setups.

mr-pokryshkin added a commit to mr-pokryshkin/opentx that referenced this issue Dec 19, 2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment