@bsongis bsongis released this Jun 2, 2014

Assets 2

Major release, a lot of new features ...

  • Proportional fonts
  • Switch warnings can be disabled for switches you don't use on a given model
  • Compensation for offset error of FrSky FAS-xx current sensors (option on m64)
  • Measured consumption (mAh) can be stored on power off (ARM-based boards only)
  • 0.1% resolution for limits (ARM boards only)
  • Sound repeat time settable in multiples of 1sec, call at model load can be disabled (ARM boards only)
  • 3 options for timer countdown voice output (ARM boards only)
  • Inputs layer with support for all physical inputs and telemetry (Taranis only)
  • Lua interpreter for runtime scripts and one-time configuration assistants (Taranis only)
  • 9 GVARS instead of 5 (ARM boards only)
  • GVARs useable for offsets and limits (Taranis only)
  • GVAR modification popup on home screen can be enabled/disabled for each GVAR (Taranis only)
  • Output curve assignable to each servo on the SERVOS page (Taranis only)
  • 32 curves instead of 16, with smoothing, and any number of points between 2 and 17 (Taranis only)
  • 64 custom functions instead of 32 (ARM boards only)
  • New trim system (a mode's trims can be relative to that of another mode's)
  • Pot position memory for the 4 pots, with startup warning (Taranis only)
  • Ability to read text files from the SD card. A file with the name of a model will be linked to it and easily - accessible as "model notes". Can be displayed automatically at model load for use as a checklist. (Taranis only)
  • Copy/paste/insert/delete of custom function lines (Taranis only)
  • Altitude can be displayed in the top bar (Taranis only)
  • FrSky Taranis will run at 120MHz instead of 60MHz
  • Bootloader for Taranis, removes the need to install computer drivers to flash new firmware
  • SPORT data form internal module available on the UART connector in the battery compartment in the Taranis
  • Companion merged into OpenTX
  • Companion major code / graphics refactoring
  • Radio can handle EEPROM conversion by itself (no need for companion, ARM boards only)
  • Support for the 6-position pots on Taranis, with individual positions available in the switch selection list
  • Sticky Logical Switches
  • ASpd, dTE, Cel-, Vfas- added to Telemetry values
  • Improved vario sounds (ARM boards only)
  • Taranis will be useable as a standard PC joystick through USB, 8 analogs and 8 buttons mapped to CH1-8 and 9-16 respectively
  • Workaround for newer bogus FlySky modules that send out servo centers on powerup (9x only)
  • Finnish language support
  • Default audio files can be placed on the SD card for each model for all switch positions (both for physical and logical switches).
  • Support for up to 16 channels on trainer input